Question about Teac AG-D9320 Receiver
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: teac ag-d9320 5.1 receiver fuse
Make sure the fuse you put in matches the power requirement of the device you're installing the fuse into, putting a fuse that does not handle the current will cause this, but do not overshoot as this may fry your device - it must match. If you know it's matched, then the device you're installing the fuse into may be faulty in such a way that it is drawing the wrong amount of power. This can be due to the power supply on the unit.
Posted on Sep 07, 2007
SOURCE: Help with AG-D9320
These recievers are prime for running surround sound through you TV. It all depends on your TV service, Now if you have a cable box from Dish network, this is the easiest in the world, all you need to look for is an output labeled "OPTICAL OUT". It's a small port with probably a small glowing red light coming out of it. You'll need to buy and optical cable and plug it in there, and then run the other end to the optical input of your surround sound reciever, and then assign a video input to that digital audio signal. It's the best audio you can get by far.
Now if you down't have that, it is still very easy. Find you reciever look for a video input and plug an audio cable in(Red and White cable). Plug the other end into your TV's audio output, a red and white output that is probably labeled audio out, plug that in, switch TV to whatever you are viewing, turn on the reciever to whichever input you assigned and there you go.
If your TV doesn't have an audio output, then you need to go to your cable or sattleite box, and find the audio output, the R/W(Red & white), and run that out to your reciever, the sound won't come through the tv unless you run a second audio out from the reciever into you tv's audio input on the same signal your picture is coming from.
I hope that helps.
Posted on Jan 07, 2008
you can download a manual for $9.99 from User-Manuals.com....I did this today and the manual is identical to the original it seems
Posted on Sep 19, 2008
Tips for a great answer:
Jan 31, 2013 | Teac AG-10D Receiver
Jan 14, 2013 | Teac AG-680 Receiver
Oct 03, 2011 | Teac Audio Players & Recorders
Jan 07, 2008 | Teac AG-D9320 Receiver
Dec 25, 2007 | Teac AG-D9320 Receiver
Sep 07, 2007 | Teac AG-D9320 Receiver
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: