Question about Gateway Computers & Internet

1 Answer

Need to find my wi fi password

I have the wi fi adress

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Gateway Master
  • 7,627 Answers

You can reset your wireless access point by depressing the reset button in the rear of the device, it's very small, use a pen or similar point to depress and hold for 10 seconds. Or you could download a program found here:http://www.softpedia.com/get/Security/Decrypting-Decoding/WirelessKeyView.shtml

Posted on Nov 06, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: Unable to connect to wi-fi

I think it is saying that the wifi "card" is set so that it is not being configured by windows.

In XP

Control panel > Network connections

Under LAN or High-speed internet you will see an icon labelled wireless network connection. Right click on this and then click properties. You will see three tabs at the top
General - Wireless Networks - Advanced

Click on wireless networks
There should be a tick-box saying Use windows to configure my wireless network settings. I expect that, in your case, the box is unticked which means that the software supplied by the vendor of the wifi card is configuring the settings. I find that it is usually more reliable to let windows do it.

So tick the box and click OK. You may then have to reboot.

Posted on Jan 05, 2009

SOURCE: I have a problem witch wi-fi. my wi-fi can'not

here is the download link for your Wi-Fi driver

For Windows Vista : 

http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_wifi_realtek_28824A.exe

For Windows 7 : 

http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_wifi_atheros_TC00190600E.exe

Download and install the driver according to your operating system.

Your Wi-Fi will work fine now.

That's it.

Posted on Jan 24, 2010

TLGalenson
  • 73 Answers

SOURCE: what do i need to use my netbook wi fi, i also

You will need a Wifi access point to connect your Sylvania Netbook using Win CE 6 to the internet. Some cellphones can act as "Wifi access points" but most cellphone network vendors will want you to pay $10USD a month to use that feature.

Free Wifi access points include McDonalds, your local public library, your church and other resturants. I have also found that all major interstate rest areas in IOWA have free wifi.

There are several lists of Free Wifi hotspots on the internet. I like this community effort listing: http://www.wififreespot.com/

The SN comes with a short wifi guide and there is a video as well as a step-by-step Wifi guide at www.digtialgadgets.com

Tom M.

Posted on May 30, 2011

Geekman
  • 32281 Answers

SOURCE: i am trying to connect

When youclick Refresh network list, then Choose yourwireless network and then click Connect to your secured WirelessNetwork, it will asks for a Network Key before allowing you to connectinto your wireless network. This Network Key is either the WEP, orWPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphraseis an alternate way to setup the Encryption key.
When you are requested for a Network Key, you can just enter the Passphrasethat was used to configure the Encryption key in the wireless router.

Posted on Jun 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I rooted my dragon tablet now I don't have an IP address or Mac address so it won't connect to Wi-Fi or ethernet what do I do do


Every connecting device (ethernet port, wi-fi, bluetooth, FireWire port) has a Mac Adress, it's a physical attribute. If it has been erased, it needs to be recorded in the device ROM again...

The IP Adress is volatile, it just needs to connect to a DHCP server on your network (usually your router) to be regenerated.

Apr 29, 2016 | Computers & Internet

Tip

How to find a wireless password for my iPod Touch


<p>If you try to access the Internet to your iPod Touch, Wi-Fi hotspot and only that will detect the device is marked with a padlock, which means you need a password to use Join the network type. Ipod touch internet access via Wi-Fi, allowing you to browse websites with the Safari application, check your e-mail and free video calls with Face Time app. You need someone for the password if you want a Wi-Fi closed. <br /> <p><br /> <p>1. Ask your department manager of the company computer network password for the Wi-Fi when you use your iPod Touch to access the Internet while at work. <br /> <p><br /> <p>2. Check the password for a printed receipt to a Wi-Fi closed after making a purchase of a restaurant that offers Wi-Fi service to paying customers. <br /> <p><br /> <p>3. Ask your neighbor for permission to your WiFi signal, if you want to access the Internet via Wi-Fi network from your computer. If you are on friendly terms, she would give him the password. <br /> <p><br /> <p>4. Go to decree or in a mall and ask for the password to block Wi-Fi, so you can access the Internet while you shop. <br />

on Jul 21, 2011 | Computers & Internet

1 Answer

Where do I find the IP adress so I may connect manually.


https://wwwimg.roku.com/static/oldlib/roku_player_documents/rokuplayerug.pdf

page 23 change network settings

then page 14 on wi fi settings
if new service provider gave you the encyrption key and has dhcp on then this should start Roku working on Wi FI.

New service provider would have installed a wi fi router this is most likely on 192.168.0.1 or 10.0.0.1 go to cmd prompt type in
ipconfig
then press enter key
Not the default ip address
the router should have a wi fi security option that tells you if the wi fi is encrypted and what ssid is being broadcasted.
DCHP should be enabled Roku will use this to assign itself an ip address once connected to Wi FI.

you need to know routers admin user name and password as well

Apr 18, 2016 | Roku 1

1 Answer

How do I set password on Wi-Fi orca android tablet


Answer Line: Change your Wi-Fi password on various ...

www.pcworld.com/.../change-your-wi-fi-password-on-various-...

PC WorldFeb 11, 2013 - But Wi-Fi passwords, like every other kind, need to be changed every so often. Here's how to ... Android. You can't simply change the password here; you'll have to delete the network from your phone or tablet and recreate it.Missing: orca

How to Connect Your Android Tablet to a Wi-Fi Network ...

www.dummies.com/.../how-to-connect-your-android-tablet-to-a-wifi-net...
After you've activated the Android tablet's Wi-Fi radio, you can connect to an ... ... Be careful when connecting to a non-password-protected network. It's possible ...Missing: orca

How do i change my wifi password [Solved] - WiFi - Cell Phone ...


Dec 14, 2015 | RCA 8" Android Tablet w/Dual Tuner

3 Answers

My connection keep failing my password is correct.they are asking for my ip address where do i find that,


dont give anyone your ip adress,contact your internet provider to fix problem,if you are using someone elses wifi you will have that problem,use your own

Apr 26, 2015 | Amazon Fire TV Stick

1 Answer

How do get wi-fy on my tablet?


It's a good idea to access Wi-Fi whenever possible to avoid data charges. After you've activated the Android tablet's Wi-Fi radio, you can connect to an available wireless network. Obey these steps:
  1. Open the Settings app.
  2. Choose Wi-Fi.On some Samsung tablets, you find the Wi-Fi item on the Connections tab. Choose Wi-Fi to view a list of available Wi-Fi networks on the right side of the screen. Otherwise, the list shows up full screen.
    433273.image0.jpg
  3. Choose a wireless network from the list.When no wireless networks are listed, you're sort of out of luck regarding Wi-Fi access from your current location.
  4. If prompted, type the network password.
    Touch the Show Password check box so that you can see what you're typing; some of those network passwords can be long.
  5. Touch the Connect button.
    The network is connected immediately. If not, try the password again.
When the tablet is connected to a wireless network, you see the Wi-Fi Connected status icon. This icon indicates that the tablet's Wi-Fi is on, connected, and communicating with a Wi-Fi network.
Some wireless networks don't broadcast their names, which adds security but also makes connecting more difficult. In those cases, touch the Add icon. This icon might also be labeled Add Wi-Fi or Manually Connect. To make the connection, type the network name, or SSID, and choose the type of security.
You also need the password, if one is used. You can obtain this information from the girl with the pink hair who sold you coffee or from whoever is in charge of the wireless network at your location.
  • Not every wireless network has a password. Still:
  • Be careful when connecting to a non-password-protected network. It's possible that the Bad Guys can monitor such a network, stealing passwords and other information.
  • Some public networks are open to anyone, but you have to use the web browser app to find a login web page that lets you access the network: Simply browse to any page on the Internet, and the login web page shows up.
  • The Android tablet automatically remembers every Wi-Fi network it has ever been connected to and automatically reconnects upon finding the same network again.
  • To disconnect from a Wi-Fi network, simply turn off Wi-Fi.
  • Use Wi-Fi whenever you plan to remain in one location for a while. Unlike a mobile data network, a Wi-Fi network's broadcast signal has a limited range. If you wander too far away, your tablet loses the signal and is disconnected.

Oct 29, 2014 | Nextbook Premium 8 Se Android

1 Answer

How to tune in kindle to wi fi?


From the Home screen, press the Menu button.
Select Settings, and then select view next to Wi-Fi Settings.
In the list of detected networks, choose a network to connect to it.
If your Wi-Fi network and router support WPS (Wi-Fi Protected Setup), your Kindle will detect it.
If you don't see your network in the list, you need to add the network manually.
If the network is protected by a password or WPS (Wi-Fi Protected Setup), enter the password and then select Submit.If you don't know the Wi-Fi network password, contact the person who set up the Wi-Fi network.After you connect to a Wi-Fi network, your Kindle automatically connects to it again whenever that network is in range. If more than one network is in range, your Kindle automatically connects to the last network used.

Aug 16, 2014 | Amazon Kindle Fire HD

1 Answer

Finding router ssid


The SSID is not an indication on a label on the Wi-Fi device, it is the identifier broadcasted by the device ; to find it, two possibilities :
1) if you remember its password, access the setup of the wi-fi device (your router) ; this is done thru any computer connected to the router : simply enter the IP adress of the router (try 192.168.0.1 or find the right one using the ipconfig command) in the browser, and navigate to the wi-fi settings.
2) if you can't access the router, go to the wi-fi settings of your smartphone or tablet or netbook, and find he way to show the list of the access points available in the surrounding - yours is probably the first one (the stronger signal) in the list.
Good luck.

Oct 22, 2013 | Samsung Tab Tablets & eReaders

1 Answer

How do i find the wifi password for my ipod touch


Step 1:

The wifi password is on your wifi router, hopefully someone wrote it down and taped it to your router, if not you need to loginto your router to find out what it is.
Once you have the password:

Step 2:

On your ipod touch

Verify Wi-Fi is enabled and that you are connected to a Wi-Fi network.

Tap Settings > Wi-Fi. If Wi-Fi is off, turn it on by tapping the on/off icon.

Available Wi-Fi networks appears under "Choose a Network..."

Locate and tap the Wi-Fi network you want to join then enter your password

Jan 29, 2013 | Arris Comcast/xfinity Tm502g/tm722g, 702g...

1 Answer

Ipod wi fi conection


Wi-Fi Functionality
  1. Connects over the last Wi-Fi network you used that's available.
  2. If no Wi-Fi networks you've used are available, iPod touch will scan for Wi-Fi networks and show a list of Wi-Fi networks in range. Tap a network and, if necessary, enter the password to join. Networks that require a password show a lock icon (307189_1.jpg) next to them.
  3. Option to manually enter your Wi-Fi network name/SSID (if the Wi-Fi network is configured not to broadcast or be displayed to the public). If necessary, enter the password to join.
When iPod touch is connected to a Wi-Fi network, the Wi-Fi icon (307189_2.jpg) in the status bar at the top of the screen shows connection strength. The more bars you see, the stronger the connection.
Wi-Fi Settings
  1. Turn Wi-Fi on or off.
    Choose Settings > Wi-Fi and turn Wi-Fi on or off.
  2. Set iPod touch to ask if you want to join a new Wi-Fi network.
    When you are trying to access the Internet, by using Safari or YouTube for example, and you are not in range of a Wi-Fi network you have previously used, this option tells iPod touch to look for another network. iPod touch will display a list of all available Wi-Fi networks that you can choose from. Networks that require a password appear with a lock icon (307189_1.jpg).

    If "Ask to Join Networks" is turned off, you must manually join a network to connect to the Internet when a previously used network is unavailable.

    Choose Wi-Fi and turn "Ask to Join Networks" on or off. If you turn "Ask to Join Networks" off, you must join new networks manually.
  3. Join a Wi-Fi network manually.
    Choose Wi-Fi, wait a moment as iPod touch detects networks in range, then choose a network. If necessary, enter a password and tap Join. Networks that require a password appear with a lock icon.
  4. Make iPod touch forget a network, so that the device doesn't join it automatically. Choose Wi-Fi and tap the arrow (307189_3.jpg) next to a network you've joined before. Then tap "Forget this Network."
  5. Connect to a closed Wi-Fi network (an available Wi-Fi network that isn't shown in the list of scanned networks).
    Choose Wi-Fi, then tap Other and enter the network name. If the network requires a password, choose Security, tap the type of security the network uses, and enter the password. You must already know the network name, password, and security type to connect to a closed network. Some Wi-Fi networks may require you to enter or adjust additional settings, such as a client ID or static IP address. Ask the network administrator which settings to use.
  6. Adjust settings to connect to a Wi-Fi network
    Choose Wi-Fi, then tap the arrow (307189_3.jpg) next to a network.

Dec 27, 2010 | Cisco Linksys Wirelessn Router Black...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...