Question about Computers & Internet
So I've had such a fun time with this. I went to the cyber link forums, except no one even replied. So I have Cyberlink's "youcam" and it had worked great for a while until what ever happened and it would allow me to change the contrast, brightness, and more important exposure setting anymore. These settings are pushed to zero and the ability to move them is greyed out. I have HP's True vision HD and I use to be able to use Youcam and those settings with no problem. So I could just not find anywhere why it did this so I ended up doing a system restore and that just made things a lot worse. It didn't fix anything and did something else to my system, god knows what. I'll just keep it short and sweet tho. Does anyone know why these are grayed out or why I can't adjust them. Is there a way I can fix this? Keep note I can still change the sharpness, and noise plus i can use auto light and the true theater experience. or what ever it is. Any, and I mean any advice would be helpful at this point. I'll give any additional information at the bottom Hp dv7 notebook pc Windows 7 home premium intel I7 3720 qm 2.6-3.6 ghz It's a quad core 8 gigs of memory a Geforce gt 650m graphics cad with 2gb 1.5 tb of 7200rpm hdd Web cam is the Hp true vision hd
There have been instances where the camera cable has come off inside the computer on the board where the camera is.
Posted on Mar 02, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You will find U cam under SP38761 on the hp website - download it and save it to a folder in your my doc's. Then you've got it OK
Posted on May 09, 2009
You could have a faulty inverter, To determine if you have a LCD screen, inverter or video card problem, read this and follow these instructions.
Defective CCFL backlight, it may have the following symptom: Screen flashs on red/pink and off. Picture stays on in red and slowly be come normal. Picture flickering with dim display or appear black. Picture flickering on and off. All these symptoms indicate that the LCD backlight lamp (CCFL Lamp) has reached the end of the life and all you need to do is replacing the CCFL lamp.
Connect an external monitor to your laptop and power the monitor up first then the laptop, if you see the normal Windows images then the video card and laptop is OK and the problem is definitely the backlight. Dim image and/or dark display on the laptop's LCD screen indicates a faulty LCD backlight and it could be the inverter that supplies high voltage to the CCFL lamp or it is the CCLF lamp is nearly burnt out or burnt out, most likely this is the case.
The inverter can be replaced easily but the CCLF lamp is more time consuming and requires soldering skills.
for parts, repair service and DIY info.
Posted on Jun 25, 2009
check the web came setting or uninstall the web came driver and install it if that does not work then format the laptop with partition
Posted on Jan 16, 2010
Try this free webcam diagnostic software. It is Free at cnet
Good luck, Please vote 4 thumbs up 4 me!!!!
Posted on Apr 27, 2010
SOURCE: I am using an HP
The truevision HD software should have a gamma setting somewhere. If it does not go to www.hp.com and look for new drivers for it. If you have the latest drivers, and no gamma setting you are going to want to contact HP support. The webcam "could" be defective, or just cheap. If it is under warranty they should replace it after you spend some time "troubleshooting" it with them on the phone. If they refuse, be adamant, talk to supervisors until you get what you want.
Posted on Aug 10, 2011
Tips for a great answer:
Jun 30, 2014 | Dell Latitude E6320 Computer (blct63s2) PC...
Jan 31, 2012 | CyberLink YouCam
Oct 23, 2011 | CyberLink YouCam
Oct 18, 2011 | CyberLink YouCam
Sep 25, 2011 | CyberLink YouCam
Sep 16, 2011 | CyberLink YouCam
Jul 17, 2011 | CyberLink YouCam
122 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: