Question about Samsung S24A300B Monitor

Open Question

Samsung bricked monitor

It was bricked by the firmware update, it would never stop updating and there was no way to close it or stop it. It is now detected by the PC but lights don't light up and the screen is black. When tried to run the update again says that I have the latest version. Is there a way to bypass the version check and force the update? And another question is : Where is firmware stored, is it on the mainboard/power board? Didn't want to replace it before making sure BIOS is on the main board.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 45 Answers

SOURCE: firmware update

Here's the link to the newest firmware.
http://tinyurl.com/54a9wo

Posted on Jun 15, 2008

Ad
  • 1 Answer

SOURCE: Firmware update caused static on the display

See previous comment

Posted on Nov 19, 2008

  • 3 Answers

SOURCE: Samsung 945NX LCD PC Monitor - whole display is of reddish

Replace the monitor

Posted on May 13, 2009

  • 80 Answers

SOURCE: Samsung 204T no longer displays

Often problems with LCD monitors can be traced to bad capacitors. The following sites will help you identify if your monitor has bad capacitors, and how to replace them.

www.fixyourmonitor.com and http://www.youtube.com/watch?v=9Q6_TgNJvQw

Good Luck!

Posted on Jun 13, 2010

  • 10406 Answers

SOURCE: how to latest update bios

From the same part of the Samsung web-site from which you download the updated BIOS, download the instructions on how to perform the update, along with the utility that actually does the update.

Posted on Nov 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I HAVE A VIZIO TV MODEL M3D550SR ITS SAYING IT HAS TO UPDATE FIRMWARE 3.12.17 IT STARTS TO UPDATE ONLY GOES TO 37% AND STOPS CAN I GET THE FIRMWARE AND DOWNLOAD IT TO A USB AND MANUALLY UPDATE IT


Yes. You should never do those updates via internet because you can toast the system with a bad download. Check your manual. You may have a _specific_ USB location on the TV for firmware updates.

Mar 12, 2016 | Vizio Televison & Video

1 Answer

How to fix bricked 32le5300?


firmware update is unsuccessful. Contact any service technician, or the authorized service centre for Samsung.
http://electronicshelponline.blogspot.com/

Oct 07, 2014 | Televison & Video

1 Answer

Where can i download the firmware for my tablet irulu 10.1 "


Only when a brand like irulu offers an update of the firmware, you can download firmware. But I think now you ask for firmware you even can't use new firmware. I think you have bricked your tablet. But to load firmware, your tablet needs to work correct. If during an update (or while rooting) something goes wrong, you can't put in new firmware, because the tablet does not know what to do with the USB connection or with the memory card holder. Only a workshop with the correct tools can put in some firmware.

As soon as irulu has an update of the firmware they will notify registered users they can download the firmware and they also provide a manual, how to do the update. There are always warnings, if something goes wrong during an update, you can end with a bricked tablet. But if it is a regular update, they also tell you who to contact if something goes wrong.
Try to fine a certified irulu repair centre and ask them for help. (and what it will cost)

Aug 25, 2014 | Tablets & eReaders

10 Answers

Samsung syncmaster sa350 black screen


Download the firmware update
http://www.samsung.com/us/support/owners/product/LS23A350HS/ZA



Screen will turn off when complete. Just turn back on and voila! You're back in business :-).

Jun 15, 2012 | Computers & Internet

2 Answers

My samsung sew-3030 won't keep the current date


To update firmware you will need a Microsoft Windows based PC and download the latest firmware on this website:


http://www.samsungsecurity.com/product/product_view.asp?idx=6404.


SEW-3030_mr8911isp-nor+spi_For US.zip (2.23MB)


Once downloaded, unzip files to your desktop and do the following sequence:


1st -> RUN file Generic_V1.0.0.0.EXE (USB firmware update driver)


2nd -> connect your wireless video monitor to power adapter


3rd -> press and hold select (enter) button in the middle of the dial.


4th -> connect USB cable to your PC. (screen will blank white instead of black) this is firmware update mode


5th -> RUN firmware update utility mr8911isp.exe , wait to USB connection (status bar will turn green) and show message ASIC: 0301 Device Connected


6th -> Press Update button and wait...


7th -> Update done! disconnect your device and voila! no more date/time issues and another bonus bugs fixed noticed: lower alarm beep volume, menu text size increased for better reading, temperature sensor more reliable


I Hope it help everyone having problems with this baby monitor

8_26_2012_3_38_26_pm.jpg

Jan 03, 2012 | Samsung Wireless Security Monitoring...

2 Answers

For psp what does bricked mean


"Brick" means corrupting your Firmware, the system that makes your PSP run. Bricking can be caused by either "interrupted update of firmware" or attempt to install "PSP Hacks" also known as Jailbreaks or Custom Firmware (CFW).
Some PSP Models can be revived when bricked by using a system called "Recovery Menu" which becomes available when the PSP was running a CFW before it bricked. Another way of unbricking a PSP including those that runs Original Firmware is using Pandora Battery and a Magic Memory Stick.
However, there are PSP MOdels that cannot be unbricked. These are the PSP 2000 Slim that have the Motherboard TA088v3 and other higher end. The worst PSP Motherboard is the TA088v3 because once bricked, PSP becomes a lovely paperweight without game functions and possibility to be revived.

Jun 09, 2011 | Video Game Consoles & Games

1 Answer

I had a bad flash of the firmware for this TV?


Same exact thing happened to me. Can't believe they would post a firmware update that bricks the TV.

Mar 29, 2010 | Samsung LN-T2342H 23 in. LCD HDTV

1 Answer

How I do the firmware update so my i pod will


http://www.kenwood.com/cs/ce/mm/firmware/2008/eng.html

If you hit up that link, download the ver2.4 firmware, and put it on a disc, you should be able to pop that disc into your deck and let it update automatically. Turn on your car to allow sufficient power so that it doesn't stop in the middle and brick your stereo. It should just eject when you're finished. I think that might solve your problem.

Jan 21, 2010 | Kenwood DDX-512 Car DVD Player

1 Answer

Blue Ray Discs not playing on my SAMsung P 3600. Throws them out saying disc cannot be played. Help


First thing to try is updating the firmware, this is a link to download it and also download the instructions for how to do it.
follow the instructions to the letter as bad firmware updates can effectively brick these blu ray players

http://www.samsung.com/uk/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=03020100&prd_mdl_cd=BD-P3600%2fXEU&prd_mdl_name=BD-P3600

Nov 27, 2009 | Televison & Video

2 Answers

Can the firmare on a basic MP3 player be upgraded to provide better access to music file


  1. Find out the manufacturer and model number
  2. Download the firmware update files and if they're inside a zip file, it's very important that you unzip every file before running the update or it may fail. Before you leave the manufacturer's website, see if they have any specific instructions on how to update the firmware. Also check to see if any instructions were included in the download. Samsung for example included a pdf file on how to run the update.
  3. Please note that it is VERY important that your computer remains on and doesn't freeze up during the update process. Close all other unnecessary programs before starting the update. Disable your antivirus and any other protection software so it doesn't stop the process. Norton and McAfee often like to interrupt the process because they assume something bad is going on. Also don't run an update during a thunderstorm because if your computer loses power in the middle of the process, that would be really bad.
    If anything interrupts the updating process before it's complete, your hardware will likely become a paperweight aka a brick. It will have a half updated, scrambled operating system and will cease to function completely. Some routers and other advanced hardware have a rollback feature just in case but not many other pieces of hardware do so be careful!
WARNING:
Make sure that the update process is not interrupted or it may break the hardware permanently

Sep 24, 2009 | Audio Players & Recorders

Not finding what you are looking for?
Samsung S24A300B Monitor Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...