Question about Wurlitzer Jukebox CD Player

2 Answers

Song Programming I have a Rowe AMI 100 cd Jukebox & I need to program it to play songs, I started w/ 10,000 songs programmed to be played & now I am down to 20, does any one know how to re-set or re-program for 10,000 more songs? thanks

Posted by on

  • Anonymous Mar 13, 2014

    how do I fix this

  • Anonymous Mar 30, 2014

    Everything lights up, also it will play free song, you just can't select song.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 195 Answers

Hello,

With regards to your problem with the Rowe Ami 100 cd jukebox.
Do you have a manual, if not I suggest you buy a printer manual or one on CD and refer to the Programming and Installation section.

In order for the jukebox to know about the cd's that are installed in the jukebox it has to initialize all or the changed cd's that have been replaced within the jukebox.

Put the jukebox into the Service Mode (the service mode should appear on the display)
Type 3 to select the Initialize sub menu
Type 0 and full initialize will appear on the display
Press Popular to start the initialization
Place the jukebox service switch into the normal mode

Initiazation will take around 30 minutes to complete.

Regards
Alan Hood
ami-man

Posted on Feb 27, 2009

  • optoboy
    optoboy Jul 21, 2014

    Alan, you seem very knowledgable with the cd-100 series and I have question that I hop you can answer. How do get rid of the 'not allowed' message? Thanks. Optoboy

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Put jukebox in service mode type in 84 then push in 9999 press popular put back in play mode thanks pinball102

Posted on Jun 24, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rowe Ami Jukebox buttons do not unleash


Hello Pedro,

You need to unlock the top door of the jukebox so you can operate the catches to get to the keyboard. The open relays R1 & R5 which are normally under a plastic cover, the open contacts on these relays need cleaning. Do not use any form of switch cleaner, just make a paper taper and pull this through the contacts to clean the contact tips.

Regards
Alan

ami-man
UK

Feb 24, 2014 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

Only plays one song at a time; not through entire cd


This is not a problem, the machine is supposed to play only one song at a time.....If you want to play the entire CD at a time, you must first program the machine for "Album Play" and then select the disc number followed by "00". Refer to your manual for instructions on programming album play. PS I sell manuals, tech@wurlitzer-ohio.com.

Feb 05, 2011 | Wurlitzer Jukebox 1015 One More Time...

3 Answers

Rowe Nostalgia jukebox will only play a few of the numbers of the 100 cd;s. Is there anyway to reset it so it will play all numbers?


Hello,

You will need to go into the programming section on the menu.
I suggest that if you do not have a manual that you obtain one from Rowe Ami, Victory Glass or distribution.

Have you initalised all of the CD's on your jukebox? Every time you replace a CD you have to initalise it.

Regards
Alan Hood
ami-man
UK

Jan 31, 2010 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

How do I slow the speed of the 45s on my rowe r-92 jukebox .The records are playing a little too fast


Hi,

The turntable motor on the jukebox range of R-84 to R-93 is none adjustable.
If you are in the USA then the motor operates on 60hz but in Europe it would have to be on 50hz to do this a different pulley is used.

The Rowe Ami part numbers are as followes:-

30791907 Turntable Motor Assembly 60hz
30791908 Turntable Motor Assembly 50hz
21817801 Motor Pulley 60hz
21817802 Motor Pulley 50hz

These can be ordered from a Rowe Ami dealer or you could try www.victoryglass.com

Regards
Alan Hood
ami-man
UK

Oct 28, 2009 | Wurlitzer Jukebox 1015 One More Time...

2 Answers

Seeburg jukebox sx 100 scans twice and returns


Hi,

I suggest that you go to the following site for a solution to your problem.
The information listed hereis second to none.

http://home.pacbell.net/fmillera/

Regards
Alan Hood
ami-man
UK

Oct 13, 2009 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

CD palyer will not play all Songs


It sounds like the CD has to be initialized, so the jukebox knows how many songs are on the specific CD.

To initialize a CD, go into service mode, input code 31, then index the cd number (two digits), then hit "popular". return the jukebox to play mode.
The carousel should scan and load the CD you initialized, and then return it to it's slot.

It should now be able to play any song on the CD you select.

Mar 05, 2009 | Wurlitzer Jukebox CD Player

1 Answer

Rowe CD 100 that will not play all Tracks


Hi,

Are you initalizing the CD's in your jukebox after you install them?
If so it should play all of the tracks.

Regards
Alan Hood
ami-man
UK

Feb 01, 2009 | Wurlitzer Jukebox CD Player

1 Answer

Does not hold memory of programmed options


Hi,

I do not know what type of jukebox you have but the the battery will be in the Central Control Computer, this is the case with the Rowe Ami version of your jukebox. It is a 3 volt lithium (disk type) battery.

Regards
Alan Hood
ami-man
UK

Nov 29, 2008 | Wurlitzer Jukebox 1015 One More Time...

Not finding what you are looking for?
Wurlitzer Jukebox CD Player Logo

1,215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wurlitzer CD Players Experts

Dave Jukebox

Level 2 Expert

211 Answers

phil

Level 2 Expert

567 Answers

mixhali

Level 1 Expert

2 Answers

Are you a Wurlitzer CD Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...