Question about Makita Hammering
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you have to use an ohmmeter to check it, you must check the continuity of motor coil after the switch terminal if in this point you have the reading less than 200 ohms, try checking it before the switch but this time you have to switch it on. If you have the readings continue to check it from the Power Plug. Most cases the problem is only in Power cord .
Posted on Jun 01, 2009
Look around there for some O rings we have had this same problem with some of our Bosch hammer drills, and they usually replace a set of seals around the nose of the tool
Posted on Jul 06, 2009
could be a few problems, the striker could be stuck from debris or the ram might be hydraulically locked. they make a rebuild kit for this tool if you are mechanically inclined. I would suggest first going to their site and downloading a parts breakdown and there you will find what is involved and the parts listing. It is "dewaltservicenet.com" and on the left hand side type in your model number and then follow the links to download this. Let me know if you need more assistance.
Posted on Apr 23, 2011
Tips for a great answer:
Feb 11, 2016 | Makita Hammering
Sep 11, 2014 | Hammering
Jul 02, 2014 | Makita Hm1500b 42-pound Demolition...
Jun 30, 2014 | Makita HM1500B 42 Lb. Demolition Hammer
Feb 19, 2014 | Makita Hammering
May 09, 2011 | Makita HM1500B 42 Lb. Demolition Hammer
Feb 25, 2010 | Makita Hm1500b 42-pound Demolition...
524 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: