Question about PC Desktops
Have you resynched the keyboard to the wireless module. if not press the button on the wireless module and then press the button on the bottom of the keyboard also check where you installed the batteries and make sure you didnt change the channel for the keyboard.
Posted on Jan 05, 2009
Tips for a great answer:
From the User Guide at... http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=4174137&
The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your
HP TouchSmart PC. The keyboard and mouse should work immediately after you pull the battery tabs to
activate the preinstalled batteries, and then turn on the mouse (A).
You may need to manually synchronize the wireless keyboard or mouse if they are not functioning.
To synchronize them:
Make sure the keyboard and mouse are next to the HP TouchSmart PC, within 30 cm (1 foot) and
away from interference from other devices.
Keyboard: Press the Connect button on the bottom of the keyboard (B) for five seconds. The blue
activity LED on the wireless receiver illuminates when the synchronization command has been received
and turns off when synchronization is complete.
Mouse: Press the Connect button on the bottom of the mouse (C) for five seconds. The blue activity
LED on the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
If this does not work, remove and then re-insert the wireless keyboard and mouse receiver from the back of
the computer and then synchronize the keyboard and mouse again.
Jun 30, 2014 | PC Desktops
Sep 18, 2012 | Dell PC Desktops
Mar 25, 2012 | Dell PC Desktops
Oct 29, 2009 | PC Desktops
Aug 20, 2009 | ASUS PC Desktops
Dec 17, 2008 | PC Desktops
Aug 03, 2008 | PC Desktops
Jan 15, 2008 | PC Desktops
Oct 21, 2007 | PC Desktops
Oct 16, 2007 | PC Desktops
120 people viewed this question
Usually answered in minutes!