Question about Zoom X6 (5590) DSL Modem (55900003)

1 Answer

ADSL Zoom x6 5590 DNS 360 Problem

I am unable to connect my 360 to Live. The internet works fine on the PC, the Xbox is connecting to the network but the test fails when it tires to connect to the net. If I bypass the router all is ok. Does the router automatically assign a new IP.

I am using the router with Virgin Broadband, it it compatable?

Thanks
Tim

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

Yes the router assigns an internal IP address. connect it up then using your PC go into the configuration of your router (http://10.0.0.2) and look under system status, scroll to the bottom and under DCHP status you will see a list of all clients connected. Your Xbox will be listed along with its internal IP address.

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wireless adaptor was working fine until xbox live update, and since the update is unable to pick up our wireless netowork. Tried switching everything back on and on and re synching modem with xbox, to no...


To connect your Xbox 360 gaming console to a NETGEAR router's wireless network:
  1. Turn off your Xbox 360 and disconnect anything from the I/O port on the back of the console.
  2. Insert your Xbox 360 wireless adapter to the I/O port as instructed by the wireless adapter manual.
  3. Connect the wireless adapter cable to your Xbox 360 I/O port.
  4. Flip up the network adapter's antenna.
  5. Turn on your Xbox 360.
    • If you are using an unencrypted wireless network, your Xbox should connect to it automatically and you do not need to proceed to Step 6.
    • If you are using an encrypted wireless network click the System tab, and then click Network Settings and continue with Step 6.
  6. On the Network Settings page, select Edit Settings.
  7. On the Edit Settings page, select your wireless settings on the Basic Settings tab.
  8. On the Select Wireless Network page, select your wireless network.
  9. On the WEP Network page, type your wireless network key, and then click Done.
  10. On the Apply Settings page, click Test Xbox Live.
  11. If this is the first time you have connected your Xbox 360 to Xbox Live, you will probably be prompted to apply an update. If there are no updates, the Xbox Live Connection page shows that you're connected to Xbox Live. Press the Y button on your controller to continue.

If testing the Xbox it says DNS failed, then update your NETGEAR router firmware:
  1. From your computer, open an Internet Browser and navigate to http://kb.netgear.com to download the firmware for your router.
  2. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  3. Click Router Upgrade on the top left pane under Maintenance, browse for the firmware downloaded and click Upload.
  4. Wait for the router to reboot.

Dec 20, 2010 | NetGear MA101 802.11b Wireless Adapter

1 Answer

I have a internet connection but can not play online


you need atleast 1mn internet conection.and make an email id on pc.then go to xbox live on your xbox.ans some basic questions.
go to settings/system settings/network settings/cnfiger network/basic settings/automatic(ip settings & dns Settings)
go back
test xbox live connection from network settings.if every thing fine.it will do.
dont wory its simple and easy

May 23, 2010 | Video Game Consoles & Games

2 Answers

HOW DO I CONNECT MY XBOX 360 TO INTERNET THRU MY DIAL UP MODEM?


Hello Brian

Using Xbox Live on Dial up Modem would be a big pain, still listing the steps for you, hope you have a stable connection to successfully connect

Required Items

- Windows ME, XP, Vista
- PC with dial-up connection working
- Ethernet Cable (RJ45) cable or CROSSOVER CABLE
- Xbox 360

Let's Get Started

1. First connect the Xbox 360 and the PC using the Ethernet cable.
2. Double Click your Dial-up Network connection and wait for it to connect.
3. Choose "Start Menu" and then choose "Settings" then "Control Panel".
4. Select "Network and Internet Connections".
5. Open the "Network Setup Wizard" and then press "Next".
6. On the next screen Ignore the checklist and press "Next" again.
7. Select "This Computer connects directly to the internet." and press "Next".
8. Now Select your dial-up internet connection as your default connection to the Internet and press "Next".
9. Select "Local Area Connection" as your private connection and leave all other areas untouched and click "Next".
10. On the Workgroup screen leave all settings alone and click the "Next" button.
11. On the next screen Turn on "File and Printer Sharing" if you want to share your files, mp3's, divx files with your xbox 360 and click "Next".
12. Now review the settings and click "Next" to apply the changes.
13. You do not need to run the Network Setup Wizard on any other pc's so just click "Next" and continue.
Now that the wizard has completed you may need to reboot your PC and dial your internet connection again.
Xbox 360 Setup

Now we have configured your PC to share its internet connection and files to your Xbox 360 we need to configure the Xbox 360.

(Steps for old Xbox 360 Dashboard, in case you do not have NXE dashboard)

1. Go to the "Xbox 360 Dashboard".
2. Select the "System" Blade.
3. Select the "Network Settings" Option
4. Now choose "Test Xbox LIVE Connection".

Your Xbox 360 will now attempt to contact your home network. It will check to make sure it can assign itself a IP ADDRESS from your PC and then it will also check DNS server information and XBOX LIVE.
let me know if this helps

Nov 25, 2009 | Microsoft Xbox 360 Console

1 Answer

Network Issues - XBox 360


make sure you having network sharing enabled on your computers

Jan 22, 2009 | Microsoft Xbox 360 Console

1 Answer

Unable to connect to Xbox Live!


are you connecting both imac and xbox to the internet at the same time? is your adsl modem a modem/router? and does it have wireless capability?.. if all answer are yes.

assign static ip/subnet mask/default gateway and dns on xbox, then forward 88/3074 on your modem/router.

Nov 08, 2008 | Computers & Internet

2 Answers

MTU setting


Browse to the router's setup page, should be 192.168.1.1 or 192.168.1.0 and log into it. You just have to change the MTU. Put it to 1500.
Once logged in to the router, go to :

Setup
-
Basic Setup
-
Wireless Setup
-
Internet Connection Type
Connection Type = Static IP
Internet IP Address = 192.168.0.1
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
Static DNS 1 = 192.168.0.1
Static DNS 2 = 192.168.0.1
Static DNS 3 = 192.168.0.1
STP = Enable
-
Optional Settings (required by some ISPs)
Router Name = client-mode
Host Name = 2WIRE383
Domain Name = [empty]
MTU = Auto
Please remember to rate all users who assist you for free :)

Sep 29, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

2 Answers

CONNECT XBOX 360 TO COMPUTER


you are only sharing files with your pc to xbox, you cannot connect to the net throught the pc, the xbox has to have connection to a modem/router, or a router itself which is connected to modem.

Aug 21, 2008 | Microsoft Xbox 360 Console

2 Answers

My xbox 360 wont take ip anymore


go to your router. find what your ip pool is. choose an ip that is in that pool. set up your xbox's internet manually. you need the gateway, DNS, and everything (you can find this on your router online) this will give your xbox a static IP and might fix your problem

Aug 10, 2008 | Microsoft Xbox 360 Elite Console

2 Answers

Zoom X6 Adsl Router


You must assign a static IP address on the Xbox 360 that it is outside of the Zoom X6 router's DHCP pool. Also, the Xbox 360 must be in a DMZ. This will prevent the firewall of the router from blocking connections to the Xbox 360.
  1. Assign a Static IP address on the Xbox 360 console:
    • Power on your Xbox 360 and go to the System area.
    • Select Network Settings and then Edit Settings.
    • Select IP Settings. The Edit IP Settings screen opens.
    • Select Manual and then enter the following settings:
      • IP Address: 10.0.0.150 (or any 10.0.0.x IP address, where x is between 100 and 250)
      • Subnet Mask: 255.255.255.0
      • Gateway: 10.0.0.2
    • Select Done, to go back to the Edit Settings screen.
    • Select DNS Settings. The Edit DNS Settings screen opens.
    • Select Manual and then enter the following setting:
      • Primary DNS Server: 10.0.0.2
      • It is not necessary to enter a Secondary DNS Server.
    • Select Done.
    • Power down your Xbox 360.
  2. Access the Zoom Configuration Manager:
    • From a computer that is connected to the Zoom X6, open a web browser and type http://10.0.0.2 in the address line and then press Enter (or Return).
    • Enter the User Name and Password (in lowercvase letters):
      • User Name: admin
      • Pasword: zoomadsl (where "l" is a lowercase letter L)
  3. Create a Virtual Server rule to put the Xbox 360 on a DMZ:
    • In the Zoom Configuration Manager, click on the Advanced Setup icon at the top page.
    • Click on the Virtual Server/DMZ button.
    • On the Virtual Server/DMZ page, enter the following settings:
      • Internal IP Address: 10.0.0.150 (or whichever Static IP address you selected per Step 1)
      • Protcol: DMZ
      • Start Port: 0
      • End Port: 0
    • Click Save Changes
    • Click the Enable box, if you have this option.
    • Click Write Settings to Flash
  4. Plug the Xbox 360 Wireless Networking Adapter in to the Xbox 360 console. If you are not sure how to do this, please refer to the manual that came with the Adapter.
  5. Select the Zoom wireless network on the Xbox 360. (Note: The following steps assume you have a working wireless network with WEP or WPA security enabled and you know the Key and SSID of the network. If you have not done this, please refer to theFAQ on setting up a wireless network with the Zoom X6.)
    • Power on your Xbox 360 and go the System area.
    • Select Network Settings and then Wireless Network.
    • Enter the SSID of your network
    • Enter the Security Key for your wireless encryption. This must be either WPA or WEP. If you use WEP, you must enter the HEX digits for the Key you are using.
    • Power the Xbox 360 off, wait a few seconds, and then power the Xbox 360 back on.
    • Go to the System area.
    • Select Network Settings.
    • Select Test Xbox Live Connection. If everything is configured correctly, all the tests will show Pass.
  6. Congratulations! You can now enjoy your Xbox 360 with Xbox Live.

May 23, 2008 | Zoom X6 Adsl Modem/router Rohs...

1 Answer

Xbox live


THINGS TO TRY loadTOCNode(1, 'whattotry'); Direct connection with a modem only loadTOCNode(3, 'whattotry'); 1. If you are connecting to Xbox Live by using a modem that is connected directly into your broadband socket, your IP address settings are obtained from your ISP. Set your IP address in Network Settings to Automatic. 2. If you use a static IP address that you obtained from your ISP, you must manually enter this address in the Dashboard. Contact your ISP for their static IP address if you do not know it. If the IP is not static, continue with the rest of the troubleshooting. 3. Power cycle the modem. 4. If your ISP requires PPPoE settings, verify that you have entered them correctly. 5. If your ISP does not use PPPoE authentication, do not use these fields in the Dashboard. Shared connection with a modem and a router loadTOCNode(3, 'whattotry'); 1. Power cycle both the modem and the router. 2. Try connecting the Xbox 360 console to Xbox Live by using the modem only. This eliminates any configuration problems on the router. • If this setup works without the router, there is a configuration issue with the router. See the router's documentation or contact the technical support group. 3. Verify that your router's DHCP service has been enabled. See the router's documentation or contact the technical support group. 4. The IP address that you entered in the Network Settings area of the Xbox Dashboard may be incorrect. Set your IP settings to Automatic. 5. If your ISP requires PPPoE settings, try to connect with only the modem after you enter the PPPoE settings in Network Settings. • If you can connect, see your router documentation to configure the PPPoE settings correctly on the router. 6. If you are receiving an IP conflict error in the More Info section, turn off all the devices on the network. Try to connect with only the modem and Xbox 360 console connected. • If this works, there is a configuration issue on the routers DHCP server. See the router's documentation or contact the technical support group. Shared connection with a gateway device (combined modem and router) loadTOCNode(3, 'whattotry'); 1. Make sure that the device is turned on. 2. Verify that there is activity with the blinking lights sequence WAN, ADSL, and Internet connected power. Note These names will vary from model to model. 3. Power cycle the gateway device. 4. The IP address that you entered in to the Network Settings area of the Xbox Dashboard may be incorrect. Set your IP settings to Automatic. 5. If you are receiving an IP conflict error in the More Info section, turn off all the other devices on the network. Try to connect with only the Xbox 360 console on the network. • If this test works, there is a configuration issue on the gateway DHCP server. See the router's documentation or contact the technical support group. Shared connection with Microsoft Windows Internet Connection Sharing loadTOCNode(3, 'whattotry'); 1. Verify that you can browse the Internet. If you cannot browse the Internet, Internet Connection Sharing is not configured correctly. 2. Power cycle the modem. If the modem does not have an on and off switch, unplug the modem from the power outlet. You cannot follow this step if you are using a USB modem. Instead, go to the next step. You must follow this step if you are switching the modem between the Xbox 360 console and a computer. 3. On the computer, click Start, click Run, type ncpa.cpl, and then click OK. 4. On the View menu, click Tiles. 5. If the connection is listed as Firewalled, the firewall may have to be configured. See your firewall documentation. 6. Enter manual settings in the Dashboard for IP address, subnet mask, DNS address and gateway: • IP Address : 192.168.0.2 • Subnet mask : 255.255.255.0 • Default Gateway : 192.168.0.1 • DNS server (Primary): 192.168.0.1 • DNS server (Secondary): 192.168.0.1If none of this works you might be banned. If you modded your xbox360 or for downloading game saves from the internet to boost you gamer score. You might be banned!

Oct 14, 2007 | Microsoft Xbox 360 Console

Not finding what you are looking for?

Open Questions:

0 Answers

zoom x6 in full bridged mode Good Morning all, I have searched google and these forums, but can not seem to figure out what is going wrong with my port forwarding. Problem: Can not ssh to internal server. Setup: ADSL WAN line connected to the RJ11 jack on my Zoom x6 (model 5590C). Zoom router is currently set to FULL Bridged mode. Cat6 cable is connected to Port 1 on the Zoom router, the other end of the cable is connected to the WAN port of my WRT54GL (running Tomato v1.23). Other linux boxes are connected to the LAN ports of the WRT54GL. I am able to see the Internet from all computers on the Local Lan inside of the WRT54GL. In Tomato I see the Public WAN IP that is being passed to it via the Zoom router. WAN IP: 9x.xx.xx.xx LAN IP: 10.xx.xx.xx/28 LAN DHCP: is on and working correctly. Port forwarding->Basic->Has the following (lets use port 55555): On |||| Proto |||| Src Addr |||| Ext Prots |||| Int Ports |||| Int Addr |||| Description X |||| TCP |||| [left blank] |||| 55555 |||| 55555 |||| 10.xx.xx.14 |||| ssh server Now I have no special Iptable rules added to the WRT54GL as of yet... since I can't ssh in yet either.. The server have port 55555 entered in its /etc/ssh/sshd_config and I can access this by all computers on the internal LAN, so the server config is good. But I cannot access anything if I am coming in thru the WAN. nmap shows that all normal ports are filtered, which is good, but if I run: nmap -P0 -sV 9x.xx.xx.xx -p55555 The reply is also filtered. When I try to ssh to my WAN IP from the WAN it times out. Tomato logs are not seeing the attempted scans, though iptables is reporting 'DROP's from other things on the Internet. When I dump the Tomato Iptables config it appears to be right to me and unfortunately I did not bring a copy of them to work with me today. Has anyone else had this problem? Is there anything that I need to explain further or that is not clear in my post? ANY input on this would be GREATLY appreciated, even if its just a link to something that might help. Thank you all in advance!

Feb 26, 2017 | Zoom X6 (5590) DSL Modem (55900003)

Zoom X6 (5590) DSL Modem (55900003) Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zoom Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

micky dee

Level 3 Expert

2644 Answers

Mike

Level 3 Expert

4334 Answers

Are you a Zoom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...