Question about Audio Players & Recorders

Open Question

Casio CTK-573 no sound (plays to PC capture just fine) appears to be a pre-amp issue.

Posted by on

5 Suggested Answers

jitenok
  • 151 Answers

SOURCE: Casio CTK-710 Electronic Keyboard BUZZING

any key is in pressed position or short in side,or hot key is used

Posted on Feb 29, 2008

marsrover
  • 682 Answers

SOURCE: casio keyboard CTK 496, everything

set power mode switch to normal position- use main volume to increase the volume-if the power mode switch is in casio chord or fingerred position-switch power mode switch to normal

Posted on Jul 04, 2008

danforddan1
  • 192 Answers

SOURCE: Casio CTK-671 No Sound

Try plugging in a set of head phones , if you get sound that way the input jack may be causeing the prob. try pulling it back an forth a few times, sometimes this will free up the head phone jack. I hope its that simple . May be some one will have another idea Good luck DFD please rate me TK U

Posted on Apr 12, 2009

  • 1 Answer

SOURCE: Casio CTK-720 USB computer/music connection

1.Download Audacity -
http://audacity.googlecode.com/files/audacity-win-unicode-1.3.9.exe
2.buy a cable for sound input, with 3.5" connector on both sides (like
the end of mic/phones)
3. connect cable from Phones/Output on keyboard to a PC where you
connect your stereo
4.run Realtek program for sound, go to Mixer/Record and enable Stereo Mix,
then in Audio I/O click on connected device and assign Line In.
%. Now run Audacity and start recording sound,you should hear your keyboard

Posted on Nov 02, 2009

  • 1 Answer

SOURCE: Can I hook up my Casio keyboard up to my PC (CTK-551)?

if it has a headphone jack on the back of the keyboard then there is a cable that you can buy and put it in the microphone input. Another ideas is to try krystal media it is a free recording program.

Posted on Jan 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mod 2245 marantz no sound right or left.


Hello,

Do you hear the relay click when you turn the unit on? If not you have a issue with one or both amps. If you do get a relay click, check your pre-amp out/main amp in connections on the back. You may want to also play with your controls, dirty controls can cause this condition as well. If you would like to have the unit serviced, check out my website, I have a lot of experience with the vintage Marantz units.

Thanks

Willie

www.back2lifeelectronics.com

Jan 25, 2016 | Marantz Audio Players & Recorders

1 Answer

Have a Harmon/Kardon AVR 20. The right channel produces an extremely weak signal when playing music through any input. (Yet, once I hit the "test" button, the sound hits each speaker equally). Help!


It sound like it could be the pre-amp that is playing up. The picture you posted shows that the pre-amp can be listened to separately. All you need to do is pull the two black jumpers out. And connect a separate power amp to the "pre out" sockets. Leaving the other two not connected. If the weakness is present you will know it's in the pre-amp and not the power amp stage of your amp.

Sep 06, 2015 | Audio Players & Recorders

1 Answer

Can i play records through my sherwood rd6108 receiver? When i try to play a record i get no sound no matter which channel i use.


Record players require a PHONO input on an amp.
Most amps no longer have this, so you will need to source out a pre-amp for the record player, and then you can plug the record player into the pre-amp and then hook the pre-amp into a tape, DVD or AUX input.

Feb 27, 2011 | Audio Players & Recorders

1 Answer

FM tuner does not play


Hard to say without knowing more, but many tuners have a squelch function that "mutes" the output unless the signal level reaches a certain threshold. You might want to look at the control panel and search for such a switch and de-activate it.
You didnt say if this was connected to an external pre-amp or a power amp. If so, the issue could be simply one of the correct cabling and selector switch setting

Sep 21, 2009 | Yamaha RX-770

2 Answers

Hooking up Turntable to Yahama HTR-5660


you have to have a pre amp, or an old reciever with a phono input.

you dont have to use the aux input, the cd or md-cdr inputs will be fine, but you do need that preamp for that reciever

Nov 29, 2008 | Yamaha Audio Players & Recorders

1 Answer

Casio keyboard CTK 496, everything lights up on display, but no sound.


set power mode switch to normal position- use main volume to increase the volume-if the power mode switch is in casio chord or fingerred position-switch power mode switch to normal

Jul 04, 2008 | Audio Players & Recorders

1 Answer

Nakamichi TA-4A receiver no sound


HAI,AMP WORKS FINE , CONNACT ANY OTHER TO AMP(CD,DVD,COMPUTER,MOBILE,TV) IN BACKSIDE INAUDIO OR PRE_AMP .THEN SELECT  PLAYER TO IN MODE YOU HAVE INSAERTED.THE SOUND IS OK

Jun 26, 2008 | Nakamichi AV-10 Receiver

1 Answer

No sound


then its definitely your power amp trouble in the output stage. have it checked first

May 23, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

100304 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

71088 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...