Question about Hoover U6630-900 WindTunnel Bagless Upright Vacuum

1 Answer

Hoover Wind Tunnel bagless- issue with turning on

I have a brand new hoover wind tunnel. while in the middle of vacuming it just turned off and now won't turn on agian.

Ideas

Posted by on

  • bliell Feb 08, 2009

    Shuts off wont come on again.

  • yhankeeno7 Mar 06, 2009

    same problem, will turn off after 5 minutes of cleaning. Filters are clean, brushes are good. Let unit set for 30 or minutes and back it comes for another 5 moinutes, A sorty machine.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 57 Answers

Have you tried to plug the vaccuum in another outlet that is on another breaker? It could be the vaccuum tripped the breaker. Turn the breaker back on. The manual mentions the thermal protector could have been activated. If this happened it resets and your vac should run after 30 minutes. I have a Widepath Tempo and it has tripped the surge protector. If this is the problem try turning some things off that are also on that breaker/outlet, or unplug them when you use the vac.

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is belt located on Hoover wind tunnel vacum. And how to replace it. My brushes are not spinning.


Its usually located underneath the body of the unit, turn it upside down and you should see the beater brush. You need to open the bottom cover to get at the brush and drive belt.

Mar 25, 2015 | Hoover U8126-900 Wind Tunnel Dual V...

1 Answer

My hoover wind tunnel just quit while vacuuming. It is dead??? Two years old used about every other week? Any suggestions?


Some Wind Tunnels by Hoover have a poor design in the switch on the handle. Sometimes the switch does not turn on all the way and will stop running. Other times you can't turn the unit off.

Feb 28, 2015 | Hoover Self-Propelled WindTunnel Bagless...

1 Answer

Why won't my hover wind tunnel vacuum turn on


First of all you have checked to make sure you are plugging into a outlet that has power correct ? If you have power at the outlet then when you activate the switch does it make any noise at all ? If not you may have a defective switch. If it's making a noise you may have a broken belt or something jammed in the brush.

Sep 03, 2014 | Hoover U8126-900 Wind Tunnel Dual V...

1 Answer

How do you change the Hoover wind tunnel belts?


If you turn the vacuum over there will be (4) screws that hold on the base cover for the roller brush. Remove the screws and the cover and you can get to the belt(s). You can get replacement belts here:

Hoover Windtunnel Belts

Nov 18, 2009 | Hoover Company Wind Tunnel U53019 Upright...

2 Answers

Self Propel doesn't work on Hoover Wind Tunnel


Your self propel wire could be broken. Lean the vacuum back like you were using it. If you stand in front of the vacuum look down and to your left. When you move the selp propel button you should see a wire move. If not then it's broken.

Oct 06, 2009 | Hoover Self-Propelled WindTunnel Bagless...

1 Answer

Hoover Wind Tunnel does not turn on


that is a pretty good lifespan for a hoover, but its probably the power switch that's bad. Hoover uses a very poor quality switch. It shouldn't cost to much to have it replaced

Jul 05, 2009 | Kenmore 33721 Upright Vacuum

1 Answer

Filter in Hoover Wind Tunnel Vacuum


Definitely not. Do not use water or any liquids to clean it. Te normal use life is 2-3 years keeping it maintained. You can clean it dry with the dust brush from your vac attachments. place in a plastic bag and tap it some folks even us an air compressor to blow out the impacted dirt. you will only want to use the Hoover brand, other generic brands dont fit as well.

Jan 17, 2009 | Hoover U6630-900 WindTunnel Bagless...

Not finding what you are looking for?
Hoover U6630-900 WindTunnel Bagless Upright Vacuum Logo

713 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Roger Potts

Level 3 Expert

694 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...