Question about Tools & Hardware - Others
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Porter Cable belt sander
try to rig the nozzle of a shop vac to the part where the bag would normally connect and run the sander simultaneously with vac for a few minutes and see if that helps
Posted on Jan 11, 2009
to change the belt push the front roller in and to the side, and it will latch. It is hard to do this. To release push in and the the other way.
Posted on Apr 12, 2009
SOURCE: Installing belt on sander
Remove table assembly.
Remove pointer and then slide cover up and out from dust reflector.
Release belt tension by pushing tension lever toward idler drums.
Note: there may be an arrow on the inside of the belt.
The arrow should point in the direction of belt travel to ensure that the splice in the belt will not come apart.
Slide new belt over the drive and idler drums; center belt on drums.
Push tension lever towards drive drum to tension belt.
Hope this helps.
Posted on Oct 10, 2009
I'm not sure if this is the correct way to post a response, but I have a manual for Delta 31-460 sander. Let me know if you still need one.
Posted on Oct 22, 2009
There is a black metal ******** one side that is actually a lever and with the tip of a screw driver or the like, pops out and releases the front roller.
Posted on Nov 24, 2009
Tips for a great answer:
Feb 04, 2016 | Sander Tools & Hardware - Others
Nov 20, 2015 | Sander Tools & Hardware - Others
Nov 20, 2015 | Porter Cable Cable 352VS 8 Amp...
Oct 30, 2013 | Tools & Hardware - Others
Apr 11, 2012 | Craftsman Tools & Hardware - Others
Oct 31, 2010 | Garden
Sep 13, 2010 | Porter Cable 7800 Drywall Sander With Dust...
45 people viewed this question
Usually answered in minutes!