Question about Nintendogs: Labrador & Friends for DS

1 Answer

My supplies keep going missing if i have more than one item.

I buy more than one item like water and it disapears after i give one bottle of water to my five dogs, i'm positive they don't drink all of them plus the one i gave to them because you ahve to give them the item first.
so basicaly i had more than one item of water or food etc in the care box and i agve them one item they drank it and i checked in the care box agian and the item had gone all the water even though i had two or more and i only gave them one.
This has happened more than once.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

However many dogs are in you house at the time you feed them or give them something to drink, that's how many water bottles,dog food cans, milk cartons, etc. you will lose because it's a can, carton, bottle, etc. for each dog. So if you have two dogs in your house and you decide to give them some water, then you will have two less in your inventory for water.

Posted on Jan 11, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I descale a plumbed steam oven. There is no water container

Disconnect the water supply, attach a PVC Hose and a funnel, hold it above it and fill the funnel with CLR. It should start going down slowly. Fill with water three times. Reconnect your water supply. Spray the inside of the cabinet and especially the jets with neat CLR in a spray bottle, or use a commercial limescale remover like LimeAway. For really stubborn scale, buy masonry cleaner for brickwork from a builders merchant, but be very careful with it as Hydrochloric acid based. Wear full protection, and use in a well ventilated area.

Or ask the makers.

Mar 21, 2017 | Coffee Makers & Espresso Machines

3 Answers

What is bottle water

Bottled water. Generally bottled water is just a glorified tap water. However there are many things that go on to put water into a bottle. It is chemically treated things such as ozone is added.among other things as it can't just be plain water, some of these bottles have to remain on shelves for a very long time. But rest assured no one would ever do anything that could harm us, now would they. Some bottled water is actually really what we would hope it to be like some of the spring waters that are out there are actually from mineral springs. However in my personal opinion I think it's all the biggest scam in the world, we bay more for a bottle of water than we do for a liter of fuel to run our cars on & it's just water it falls from the sky for free. Think about it people.??????

Sep 18, 2013 | Dasani Drops TM, Strawberry Kiwi, 1.9 Oz.,...

1 Answer

My car not start and when I open my redietor, watter pop out each time I start, is it normal?

when u take the cap off the radiator u will always loose water becareful not to do that when the car is hot u will burn ur self badly . check ur battery it might be dead if u charged the battery and when u go to start it it does not make any noise when u go to start it then its ur starter which needs to be change and they are not cheap but not to expensive shop around for that. the radiator has nothing to do with ur car not starting how ever much water comes out add that same amount back in the same hole it came out. do this with the cap off and the car running pure water in the hole and when the water keeps spilling out that means its full but give it a sec to go down the pipe then cap it qucik make sure its on tight. when u pure water in it if u lost a lot of coolent go to a auto store and buy a 50/50 antifreeze bottle 50% water and 50% antifreeze then u will have no need to had water by a hose or a bottle of water.

May 16, 2011 | 2001 Volkswagen Golf

4 Answers

Can I use tap water for formula bottles? If there are additives in my tap supply I need to watch out for, how can I tell/test if they are in my water?


Mar 30, 2011 | Baby Care

1 Answer

What does “unboxed” mean?

Unboxed items are genuine, authentic, fresh and 100% original. Sometimes the outer box gets damaged in transit so it is removed. Unboxed items always contain the same original fragrance as the boxed versions. They are the best way to save. Boxes can become damaged while shipped or handled, or the bottles can be scratched so we can purchase them for less and pass the savings on to you.

If the UPC codes or any other tracing codes are missing, altered or defaced from any product box or bottle, it was not done by the manufacturer and occurred in the supply chain after it left the manufacturer.

Nov 23, 2010 | Health & Beauty

1 Answer

Freezing of low pressure pipe 24 BTU

A line or coil freezing is a sign of restricted air flow or low on freon. Make sure the fan that circulates the cold air is working and the filter and coil at the filter are clean. A dirty coil can be cleaned with coil cleaner and a water hose. You will need to remove the unit and take it outside. (window units only) You can buy a bottle of coil cleaner at any hardware store. Follow the instructions on the bottle but basically you spray the coil until soaked wait 5 minutes and flush it clean with water from a hose. Repeat if necessary. Try not to get water and cleaner on the controls. Be careful water will be trapped in the unit you may want to tip it toword the back for 10 minutes or so and if possible let it set outside to dry. Reinstall the unit and put a clean filter on it and give it a try. If ice forms again it is low on freon and will require a repairman to fix it. Freon is a restricted item and you have to have a license to buy it. good luck..

Aug 20, 2010 | Daewoo Heating & Cooling

2 Answers

What symptoms will water in the gas cause?

Water in the fuel will cause the engine to spit and sputter,no power,and engine miss fire.Please rate if this was at all helpful,thank you,and use HEET ,two bottles to remove the water,and lucas fuel treatment one bottle,for fuel contaminates.

Jul 18, 2010 | 1992 Ford Aerostar Extended

1 Answer

Manually add water?

Put 2 cups of water into the maker.

Jun 20, 2010 | GE Monogram ZDI15C Automatic Icemaker

2 Answers

Black line on hitachi projection tv

sounds like the water has went under the rim and dried there the line will never disapear

Jul 23, 2009 | Hitachi 42V710 42" Rear Projection HDTV

1 Answer

Ihave a make your own beer kit missing instructions item #61078

Just played around tonite with the Mr. Beer version of what I am guessing is the same thing.

Your biggest problem will be determining the liquid voiume it makes so you know the TOTAL AMOUNT OF WATER you will need... saw one on Ebay and seems the seller can't figure out the amount of beer if makes, so not bidding much on it.

I have noticed most kits make five gallons, but MrBeer makes two gallons. If you can figure out if it makes five or two, then email and I can give you the rundown on how to make it.

Easy, just the sanitation takes the longest. EVERYTHING needs ten min. soak in the stuff. Summary for now seems to be use half the sanitizor to sterilize the equipment, other half for the bottles you use when the beer is done fermenting.

dissolve the sugar ('booster') in 1/8th volume of water (cold) used, let it reach a boil, then remove from heat and throw in the mix that is in the can (warm can so it's easier to get out), then put it into the fermentor that's already 1/2 volume of water, stir well, fill the container the rest of the way (rest of the water). Stir well again. Sprinkle the yeast on top, wait five minutes, stir yeast into the solution, then close up, and wait a week or two.

After sterilization, Put regular sugar (3/4 teasp per 12 oz) in each bottle you're gonna fill with beer, and store for at least three days away from light. Bottle too soon, it will explode, wait too long, it will be flat, etc. I'm going to wait two weeks so I won't have exploding bottles... I hope...

Look on the internet, for more details, or I'll scan the MrBeer booklet (six pages or less have the main information, signs to look for, warnings, etc). I'll put it into Word format, PDF format, whatever I can get to work for you. But seems that the box, according to the ebay seller who has one just like it, doesn't say the volume of beer it makes, so look at the fermentation container, and see if you get an idea that way.

Oh, and U tube has a video of MrBeer being used. SEEMS simple enough

Aug 03, 2008 | Health & Beauty

Not finding what you are looking for?
Nintendogs: Labrador & Friends for DS Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

917 Answers

Julian Wainwright

Level 2 Expert

64 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides