Question about Arris SURFboard SBG900 Wireless Router (DHSBG900)

1 Answer

I cant find my wep key for my motorola sbg900 and i need it to get online for my ps3. how do i find it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Usually to do this, you need to connect to the router with a computer and an ethernet cable.

Start the browser and enter the following:

http://192.168.100.1 or http://192.168.0.1

This should bring you to a configuration screen of the router. Next, go to the configuration tab and head out for the wireless configuration and then the security configuration. In there you should find the location where the WEP keys are stored.

if you can't get connected, yu can look for more help in the manual of the device.

You can download it here:

sbg900 manual

Cheers

Critter



Posted on Jan 04, 2009

2 Suggested Answers

SOURCE: wep key

The username is "admin," and the password will be "motorola." These are the [case sensative] default settings. If it doesn't work, you may have changed them yourself and not remember, or your internet installer may have done it for you when they set-up your internet connection [I know the guy who came to my apartment tried to do that to mine]. In either event, if you don't remember what your settings are, just reset your modem. This will restore ALL factory defaults on the modem.

To reset your modem, just look at the back. An inch or so above the Ethenet jack is a tiny pinhole. To reset your modem, you need to stick something in there [A mechanical pencil will work,or a paperclip], and hold it for a full 30-seconds. All lights will go out, and then slowly all come back on, but keep on holding - do not let go until a full 30 seconds are up. After 30sec, let go - the lights will all go out again, and then slowly return. The modem is now restored to its factory defaults, so open up a browser page, access the modem [192.168.0.1] and try the default login ID & password. Good luck.

This is the address for the User Guide, if you need extra help :
http://broadband.motorola.com/consumers/products/SBG900/downloads/SBG900_User_Guide.pdf

Posted on Jan 19, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find my wep key? I cant remember it and cant get online wireless with out. I did go to http://192.168.0.1/login.asp but I cant seem to log in there. Please help.


Try to access 192.168.0.1 once again. Try to use "admin" for the username and "motorola" for the password. If "motorola" doesn't work, try "password".

Sep 03, 2011 | Arris SURFboard SBG900 Wireless Router...

1 Answer

Set up wireless security


1 On a computer wired to the SBG900 USB or Ethernet port, open your web
browser (for example, Microsoft Internet Explorer)
2 Type http//:192.168.100.1 and press ENTER to display the login window:
3 In the User ID field, type admin (case sensitive) and press TAB.
4 In the Password field, type motorola (case sensitive) and click Log In to
display the SBG900 Setup Program main window:
As soon as your network is operational, run the SBG900 Setup Program to:

"Wireless Network Setup"
For a LAN with one or more wireless clients, enable wireless security on the SBG900.

"Wireless Network Setup"
After enabling wireless security on the SBG900, as required on each wireless client:
> If you disabled ESSID broadcasting on the SBG900, set the client Network
Name (ESSID) identical to the ESSID on the SBG900.
> If you enabled WEP on the SBG900, set the client WEP key identical to the
WEP key on the SBG900.
> If you enabled Allow Only Listed Stations Access, be sure the MAC
address for each client is correctly listed on the SBG900.

Dec 22, 2010 | Arris SURFboard SBG900 Wireless Router...

1 Answer

How do i find my wep code for my motorola sbg900


OPEN A BROWSER & type 192.168.1.1 enter.
This should open up the wizard to make settings. Look through all the different tabs & links.
If you cant do it then hit the reset button on back & hold it in for 30 seconds. release and it will be back to default settings. Enter your own NEW wep code.
http://broadband.motorola.com/consumers/support/default.asp?supportSection=CableModems

Sep 18, 2010 | Arris SURFboard SBG900 802.11g/b...

1 Answer

Change wep password for a motorola sbg900


you can chane the wep key or network key by simply accessin the router paGe and on the wireless settin chane the wep key with your desired passowrd

to access the router just key in 192.168.100.1 on the address bar

the default usename: username and the password: motorola

wireless settins is located on the left of the paGe

Jul 24, 2010 | Arris SURFboard SBG900 Wireless Router...

1 Answer

Where do i find the wep? i am tryin to connect my ps3 to the wifi.


HI,

Please go to one of the computer which can go online

1 On a computer wired to the SBG900 USB or Ethernet port, open your web
browser (for example, Microsoft Internet Explorer or Netscape
Navigator®).
2 Type http//:192.168.100.1 and press ENTER to display the login window:
3 In the User ID field, type admin (case sensitive) and press TAB.
4 In the Password field, type motorola (case sensitive) and click Log In to
display the SBG900 Setup Program main window:
now you would be able see your WEP key


Hope it can resolve your issue
Thanks for using Fixya

Apr 19, 2010 | Arris SURFboard SBG900 Wireless Router...

1 Answer

Unable to wireless connect TP-Link TL-WR841ND to Motorola SBG900


DO any of these error conditions show up on the front panel display?

Front-Panel Lights and Error Conditions
Light Turns Off During Startup If:
RECEIVE The downstream receive channel cannot be acquired
SEND The upstream send channel cannot be acquired
ONLINE IP registration is unsuccessful
POWER The SBG900 is not properly plugged into the
power outlet
OR
Light Turns Off During Normal Operation If:
RECEIVE The downstream channel is lost
SEND The upstream channel is lost
ONLINE IP registration is lost
POWER The SBG900 is unplugged

If you rent or lease your SBG900 Contact your cable service provider.
If you own your SBG900 Call 1-877-466-8646 for technical and warranty support. Support is available
24 hours a day, seven days a week.

Feb 28, 2017 | Arris SURFboard SBG900 (49402201900) Modem

1 Answer

WEP security setup on SBG900


If you set a WEP security connection, of course you will be kicked out of your connection. You have to re configure your laptop to gain access to your WiFi, inserting the new password you set the WEP with... Hope this helps

Jun 02, 2009 | Arris SURFboard SBG900 802.11g/b...

1 Answer

Wep key


Try admin for the username and motorola for the password.  The default SSID is Motorola.  Here is the pdf with all of this info.
http://broadband.motorola.com/consumers/products/SBG900/downloads/SBG900_Quick_Install%20_Guide.pdf

Apr 24, 2009 | Arris SURFboard® SB5101 Cable Modem

1 Answer

Password for setup program lost /WEP-key??


If by set-up program you mean 192.168.0.1, then the default password is "motorola" and username is "admin" from there you should be able to see everything you need. If you changed it from the defaults, then you might have to reset the SBG900 to factory defaults by pushing and holding the small reset button on the SBG900.

I never had to run any "setup program" to get mine working, just plug and play. If you did need to install additional software then you might have problems that I am unaware of. Hope I was able to help.

Nov 15, 2008 | Arris SURFboard SBG900 Wireless Router...

2 Answers

Wep key


call your isp and they wilkl help you and if you go to there office they will give you a disk

Jan 11, 2008 | Arris SURFboard SBG900 Wireless Router...

Not finding what you are looking for?
Arris SURFboard SBG900 Wireless Router (DHSBG900) Logo

3,685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arris Computers & Internet Experts

Suddenlink Help

Level 1 Expert

44 Answers

 John
John

Level 3 Expert

794 Answers

richie46

Level 3 Expert

7389 Answers

Are you an Arris Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...