Question about Zanussi IZ141W Front Load Washer

3 Answers

Ge profile front load washing machine demo mode

Can't get the washing machine out of demo mode !!!!!!

Posted by on

  • dsmith522 Apr 08, 2009

    I have the same problem. My GE front loading washer is stuck in demo mode. Tried your suggestion and it did not work.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I called General Electric and this is the solution:


unplug the machine for 2 to 3 minutes.

Plug it back in the wall

Do not put the power back on.

Open the door

Press the start/pause button 5-6 times

The display will say demo exiting...

This works. Also don't forget to remove the shipping bolts before starting your washing machine!!

Good washing!!

Posted on Apr 10, 2009

  • merryhunt
    merryhunt Aug 15, 2012

    thanks so much for this post it truly works ansd i am a parent with 5 kids and limited money to pay the ridiculous repair man prices great info again thanks so much

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Unplug the washer wait 2 or 3 minutes then plug it back in turn on the power and press the pause button 5 times..........it should then display that it is leaving demo mode....that's it......

Posted on Apr 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

GE Profile washer WPDH8800 stuck in demo mode: unplug, plug right back in, within 30 seconds, open the door and press start/pause 5 times in quick succession. Here's the link that took a day to find: http://www.geservicenet.com/cc/trngprog/ProfileHAWasher_V4.pdf

Posted on Jan 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool wwdc 9940 , it's one in the 6th sense range. I believe my washing machine is stuck in demo mode and I cannot get it back to being usable. Help!! I have so much washing to do!


I don't believe there is a demo mode in a washing machine. You would either do a wash or not do a wash. The internet seems to know nothing about it either. Contact the dealer.

You do have the water switched on?

If you have used the machine normally before, you have a fault and need to call a repair man.

Aug 16, 2015 | Washing Machines

1 Answer

'washing machine miele w1714 lock on Message demo programme how i do unlock?


Demonstration Mode (Dealer Displays)
Initial requirements
- Switch off the machine.
- Close the door.


Note
Once you begin the access procedure, it must be completed within
10 seconds.


Accessing
1. Press and hold the Start Button while switching the unit on with
the On/Off Button.
2. As soon as the Start LED lights up, release the Start Button.
3. Immediately press and hold the Start Button, until the Start
LED turns off.
Deactivation
Repeat the accessing procedure.


Note
The Demonstration Mode is NOT deactivated when the power is
shut off with the On/Off Button, or by unplugging the appliance.

Nov 04, 2012 | Washing Machines

1 Answer

It says demo on it


You can ususally take your Hotpoint washing machine out of DEMO MODE by holding down both the ON/OFF button and the START/RESET button at the same time for about 3 seconds.

The display should then indicate D OFF.

If this procedure does not work for your particular machine, then please just comment back and be sure to include the exact model number of your washer next time so we can provide the appropriate procedure for your appliance.

Good luck.

Dec 15, 2011 | Hotpoint Washing Machines

1 Answer

MY LG washer is out of balance. I have been told there is a demo mode that can rebalance the washer drum. Do you know how to do this?


The demo mode does not do what you want it to do. Demo mode allows the retailer to demonstrate the wash tumbling without hooking the machine up to water and drain, and show the spin, and allows a servicer to test see those things, plus testing of the display board, water fill, and even the heater if your model has one. Demo mode will NOT "rebalance" the washer drum. Some models have a "Spinsense" setting, and newer models have a "Tru balance" ring, which does a very good job. (no, it is not a retro-fit type drum) Your only solution is to make sure your machine is on a solid floor, level, and all legs making firm contact with the floor. Load selection and load size have a limited effect on un-balanced situations, but The biggest factor here is having a SOLID FLOOR.

Oct 02, 2009 | Zanussi IZ141W Front Load Washer

1 Answer

Electrolux cooker display in Demo mode


Try holding the cancel button for 10 seconds until it beeps and see if that takes it out of demo mode. I can't find any good info on this model. So it's a stab in the dark.

Sep 14, 2009 | Electrolux EW1000i Front Load Washer

1 Answer

How do you turn off demo mode on hotpoint ultima dishwasher


Hello leedowns1,

You can take it out of demo mode by pressing the "on/off " and "start/reset" button together until "d of" appears. Hope this fixes your problem.

Thanks,
edgin96

May 01, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Cant get out of demo mode


press and hold both the On/Off button and the Start/Reset button until "D off" is illuminated in the display you should then be able to select wash programme as normal

Apr 15, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Not working washing machine


Sounds like it's either in demo mode or you changed something when you went into programe mode. Handbook should tell you about how to get in and out of demo mode.

Dec 23, 2007 | Miele Novotronic Premier 500 Front Load...

1 Answer

Demo Mode


Try pressing the "on" and "start" button together for over 5 seconds..............

Oct 20, 2007 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Zanussi IZ141W Front Load Washer Logo

2,407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

shaun taylor

Level 3 Expert

1444 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...