How do I replace the water valve assembly on my breville coffee maker?

I ordered the breville water valve assembly to be replaced. How do I go about taking the machine apart to replace it?

5 Related Answers

Anonymous

1 Answer
Posted on Jan 01, 2009

SOURCE: Need Replacement pot for black Kit. Select. Dual Pot Coffee Maker CM-202

Select Brands
Kitchen Selectives
Select Brands
Customer Service Or Call 913-663-4500
To order replacement carafes for the CM-202 Dual Coffee Maker you have to call Customer Service at 913-663-4500 - This item cannot be ordered on line.

Anonymous

1 Answer
Posted on Jan 29, 2009

SOURCE: Hamilton Beach Stay or go Coffee Machine

I finally got in touch with the Hamilton Beach (1-800-851-8900 between 8:30-4:00 EST) and found out that Model 45235G replacement carafe is available for order from them for $25.98 (S/H included) plus state sales tax.

Anonymous

3 Answers
Posted on Dec 05, 2009

SOURCE: need to replace steam valve on delonghi magnifica coffee machine

the steam valve will pop off it comes straight out

Anonymous

58 Answers
Posted on Jun 24, 2010

SOURCE: My Breville Keurig won't brew the coffee

Contact Keurig customer service at 1-866-901-BREW (2739) -- everyone i have spoken to was very kind and helpful

Anonymous

1 Answer
Posted on Mar 09, 2011

SOURCE: Online store for Breville spare parts?

Hi, can anyone tell me where I can get a replacement steam wand and double coffee holder for a Breville BES820? I have been looking on the web and can't find anything.

Many thanks
Cate

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

In the bottom of the Breville Model BKC600XL there is a small glass check valve covered with foam. It is broken. Does anyone know where I can find one?

Yes, try one of the following:

Breville Juicers Breville Blenders Breville Fryers Breville Ovens Rush...

Amazon com breville replacement parts

Find Breville Parts Now

Read full answer

Mar 03, 2015 • Breville Coffee Makers & Espresso Machines

0helpful

1answer

How do I replace the Magnetic Valve Assembly part in a Brevelle BES830xl Espresso Die Cast machine? The part looks hard to get to and the machine looks hard to disassemble.

yeah your right so I suggest you to call a service or send it to the nearest coffee machine repair shop.

Read full answer

Nov 07, 2012 • Breville BES830XL - Die-Cast Programmable...

1helpful

1answer

Leaks out of the bottom took it a part it appears the water solenoid is bad very rusty and show signs of leaking. Part number is SH-V0329BC-R(C1) or it could be SH-V0829BC-R(C1)

It is SH-V0829BC-R(C1). The valve has leaked internally and prob shorted out. The needle valve didn't close completly when the water pump was running allowing water to enter the valve. Solenoid needs replaced. Krurig used this same item. can get the part on Ebay or do a web search and find a supplier.

Read full answer

Jun 08, 2011 • Breville BKC600XL Coffee Maker

0helpful

1answer

Coffee brewer works to the point wher you push the flashing brew button no water pumps through.

Hi

If your coffeemaker appears to be clogged. Create a vinegar and water solution and flush the concoction through your coffeemaker pump. This will help dissolve build up in your coffeemaker. If you do this once a month, your coffeemaker pump won't clog.Unplug the coffeemaker and inspect the pump valve. Water won't rise through the fill tube if the pump valve is stuck or broken. If your pump is sealed, replace the pump. If the pump valve is accessible, make sure there are no coffee grounds or mineral deposits around it.
Also check the brewing switch is in good working order. Remove the base plate on your coffeemaker and test the switch with a volt-ohm meter. Set your volt-ohm meter on the RX1 scale. If your switch reads zero ohms, your switch works fine. If it reads anything other than zero, replace the switch. Also take a look at the tube connectors, if your coffeemaker is sputtering, leaking or steaming. Leaks in pump coffeemakers are often due to faulty tube connectors. Unplug the coffeemaker and fill the reservoir with water. If water leaks from an elbow, clean the mating surfaces before replacing it. If your water leaks from a tube connector, replace the tube and mating elbow to ensure a good fit.

Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com

Read full answer

Mar 07, 2011 • Breville BKC600XL Coffee Maker

0helpful

1answer