Question about Sansui TVS2750 27"

1 Answer

TVS2740B, how do I switch from TV to Video Input manually?

I have a universal remote now as the original remote is long gone. Have a Philips DVD Player and can't switch between TV mode and DVD mode to watch movies. Any suggestions?

Posted by on

  • Anonymous Mar 13, 2014

    I am trying to get my tv. into vidio mode so I can watch a dvd. I have a new universal remote but still can't get the tv. into vidio, for the dvd. to play

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Going to have to get a universal remote with input button on it, or tv/vcr button, had same problem!!

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an esa tv model EF420E. What channel does it need to go on in order to watch DVD's and play on the Xbox?


I assume you have the DVD or XBox connected to the composite video or S-video ports on the EF420E. These can only be accessed with a remote control that has an Input button. The original remote had the Input button near the middle of the remote on the right side of the remote. Pressing it allowed you to toggle between TV, Video 1, and Video 2. If you do not have the original remote or the remote's Input button doesn't work, you need a replacement remote or an universal remote with an Input button. (Many of the cheapest universal remotes don't have this feature button included.) A replacement remote is available from http://remotes.com/store/esa/ef420e.html . They have the original remote and a guaranteed to work alternative. If you choose to get another universal remote, you may need to try multiple codes until the Input button works for your TV. (Try Funai codes, if ESA isn't a listed manufacturer.)

The ESA EF420E was built by Funai. The manual is available from Funai Service: http://www.funai-corp.com/support/manuals.aspx . The direct link to the manual is http://www.funai-corp.com/support/om/EF420E.pdf .

I hope this helps.

Cindy Wells

Oct 30, 2014 | Televison & Video

1 Answer

Need the remote code for a phillips dvd player


These are the codes printed in the owners manual for your dvd/vcr player.If they do not work you will have to contact Emerson and ask them for help getting the code. The contact number should have come with the instructions for the remote. Just give them the model number of you remote and the units model number and they should be able to help you. I hope this information helps you with your problem. Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Press a button on the TV’s original remote control that selects an external input channel until the DVD
recorder’s picture appears. Check your TV owner’s manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO 1, VIDEO 2, VIDEO 3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands (Example)
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00

Apr 25, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

Unable to get remote to switch to tv/video RCA remote tv is sanyo


It took me forever to figure it out. Press the input key, just below the 9. The TV channel should be on 3. Make sure you put your DVD in and press play manually, so you can see that it is on.

Hope that helps

Apr 03, 2009 | RCA 3-Device Universal Remote with...

1 Answer

Dvd input


I don't know this model of TV in particular. I can give you a generic answer that should allow you to figure this out.

Check the options for your TV set. See if there are the connectors at the rear side for an external audio and video input that is compatible to your DVD player. This would be an external video audio input option. If there is and you do not have a switch for it, then you need the original factory remote contol. Many of the universal remotes lack the full features of the products.

If your TV set does not have the option for external video and audio, one work around is to purchase an audio video RF TV modulator. Many of the stores that sell TV options usually carry these devices. You can then add a CATV 2 way cable switch to switch between the modulator and your cable service or antenna. You will have to purchase the additional necessary interconnect cables.

On the input of the RF TV modulator you would connect the DVD player. The quality will not be very good, but at least you will be able to watch the DVD player on your TV set.

Once you figure everything out, bring a print of this email to the dealer. When he looks at all this he should know exactly what you require.

Jerry G.


Nov 01, 2008 | Philips Magnavox 27MS343S 27" TV

3 Answers

Toshiba 24AF44


You need the original remote controller to be able to switch input modes.Universal ones usually don't work. If you don't have the original remote and can't find it ever or if it is too expensive you can buy an rf modulator ( very cheap) and connect your dvd player, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me. It placed the connection to channel 4 and other cable channels are still working,

You can buy the RF Modulator from: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180299245670

Mar 16, 2008 | Toshiba 24AF45 24" TV

12 Answers

Sanyo stuck on video mode


Yippie, I figured out a solution that worked!!! I have a univeral remote from comcast, on that remote near the bottom left is a small button that says (input) tv/vcr, press that one time and whala!! the tv video screen was gone, I had to manually change the channel from the tv channel button on the unit. once I changed the channel to 3, my universal remote worked... the button is the second one from the bottom left... I was on hold with sanyo for a long time and just kept trying on my own, so good luck!!!!

Jan 13, 2008 | Sanyo DS27510 27" TV

4 Answers

Duranrand Tv


You need the original remote controller to be able to switch input modes.Universal ones usually don't work. If you don't have the original remote and can't find it ever or if it is too expensive you can buy an rf modulator ( very cheap) and connect your dvd player, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me. It placed the connection to channel 4 and other cable channels are still working,

You can buy the RF Modulator from: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=170273581556

Nov 22, 2007 | Durabrand DWT1304 13" TV

1 Answer

Manual Controls Insufficient


What is your universal remote control? if its not philips magnavox you try this universal remote control you will set the code match to your tv sanyo which you will see at the back of the instructions manual when you buy this remote control. follow the instruction of the manual on how to enter the code for tv. thanks.God bless you. i hope it will help.

Jun 11, 2007 | Sanyo DS20930 20" TV

10 Answers

No Video


From the manual (search Google for CM27101S): Normally, your TV displays the signal coming through the antenna terminal. However, If you?ve connected another component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from the component. To do this, you will need to switch from the ? TV ? input to the ? Line1, Line2 ? Input, as follows: 1 With the TV on, press the MENU button twice, then ? Set-Up ? menu will appear. 2 Use the WCHVbuttons to select ? Input ?. 3 Press the CVOLB buttons to change from ? TV ? to ? Line1, Line 2 ?. 4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.

Aug 07, 2006 | RCA F27676BC TV

Not finding what you are looking for?
Sansui TVS2750 27" Logo

Related Topics:

425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72271 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...