Question about Hitachi L32HP01 32 in. HDTV-Ready LCD TV
In an effort to use my gaming headset with my xbox on this tv I purchased a 'Xbox 360 Component HD AV Cable.' I have set this up previously on a different tv with different cables (the ones batched with the older style xbox) so am fully aware of how to do it. I have reset the picture settings on both my tv and my xbox (using the right trigger and Y on start up). Still all I get it just sound and no picture. I have double and triple checked all cables are in the right slots and that are in the same group at the back of the tv. I have the xbox360 hdmi cable also which works absolutely fine on 480p, 720p and 1080p. I have tried switching to this and altering the display mode to see if that would work on YPbPr still no success. Please help!
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is no cable slot. the monitor is not a receiver. it has no tuner in it. it will need a signal from a tuner box. and that must be fed to the tv with an hdmi cable or a dvid cable for hd to work. see your manual for further information on cables. see your cable supplier for information on hd boxes available in your area. if you do not buy hd service, you will not get an hd signal. so you will see little difference from a non hd device. your dvd player may have hd capabilities, but will also need the same cable to deliver true hd signal.
the good news is that its fixable by using the right equipment.
Posted on Dec 28, 2007
SOURCE: Set up
Seems that Hitachi DESIGNED the sound to cut off from the Audio Out jacks if you use component video or HDMI inputs. Has to do with copyright laws of the HD Video -- which makes it asinine that they disabled the audio as well, as it's not part of the copyright issue. Seems to me they were just lazy to disable the ENTIRE set of output jacks.
I am hoping to find some sort of hack for this (either firmware or severing/splicing a control wire). However, I can't find much information on this yet.
Posted on Feb 12, 2008
SOURCE: Hitachi 42" plasma TV (42PD6600)
My plasma TV seems to have problems with picture immediately after turning on. At about two weeks ago, the TV lost picture after turning on the TV. It was corrected by disconnecting power then reconnecting. A switch on rear left hand side would click bringing picture ON, somehow this clicking seems to have problems being energized lately not allowing picture to come on the TV. Checked power cable and was getting 120 Volts to TV, nonetheless problem has gotten worst and TV does not show a picture? Your thoughts on my problem?
Posted on Feb 17, 2008
Right now there seems to be many people with the same TV problems with sony and HDMI cables. Most of the solutions are resetting the TV and sony product. Try leaving your TV unplugged for a hour to let it reset itself.
Posted on Feb 17, 2009
Tips for a great answer:
Oct 26, 2013 | Turtle Beach X32 Headset Xbox 360
Aug 17, 2011 | Microsoft Xbox 360 Console
Apr 22, 2011 | Voyetra Turtle Beach Ear Force X11 Headset...
Mar 13, 2009 | Voyetra Turtle Beach Turtle Beach Ear...
Jan 02, 2009 | Sharp Televison & Video
Nov 15, 2008 | Microsoft Xbox 360 Console
Jul 15, 2008 | Microsoft Xbox 360 Console
Jun 11, 2007 | RCA 27F530T 27" TV
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: