Question about HP LaserJet 4250n Printer

1 Answer

How to clear error code 49.4c18 on HP laserjet 4250

When you print it will show error 49.4c18

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • HP Expert
  • 175 Answers

Any 49.xxxx codes are related to firmware crash.
the probable cause is a corrupt file in the print queue. remove the printer from the network then after network is disconnected - cycle the power on the machine ( switch off then wait 10 seconds switch back on)
the 49 error will probably clear . if so Clear All print jobs in Print queue on the computerr workstation. then reconnect printer and away you go!
if however the error remains then you will need to Upgrade the firmware or replace the firmare chip/formatter ( unlikely I've only ever replaced one out of thousands of calls for this fault)

Posted on Sep 13, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: HP Laserjet 4250 PCL6 prints only one page

I've had this problem before as well. I went into advanced printer settings and restored factory defaults.

Posted on Dec 18, 2008

Printerguru
  • 10 Answers

SOURCE: hp 4250 paper jam erro

Is it a new or refurbished fuser? Where exactly does it jam. By trays, registration or before fuser? Problem can be with various sections. Need to know more.

Posted on Feb 13, 2008

Nikhil Gedam
  • 87 Answers

SOURCE: hp laserjet 4250

Hello,
This happens when the printer is printing duplex job. i.e. trying to print the other side of the page.
However check the functionality of the printer by performing Paper path test.
This would help us to know whether the printer as a stand alone ... is fine or not.

From the control panel of the printer, scroll to Diagnostic > paper path test.
Select the following in sequence.
Source: All trays
Copies: 10
Duplex: ON
Print Test Page

Check if you get the same error.
If yes, upgrade teh firmware of the printer.

Let me know the end result. We still have more depending on the above test.

- Nikhil


Posted on Nov 04, 2008

  • 27 Answers

SOURCE: how to enable duplex printing in hp laserjet 4250

This unit needs to have a duplex unit installed if you want to duplex. If the back of the unit is "flat" you do not have a duplexer installed.

the duplex unit slides into the back of the printer between the back door and the paper tray. when installed you will have a bulge on the back of the printer about 7 inches tall and the width of the printer that sticks out about 5 inches.

after installing the dupelxer you may need to enable it in the print driver under properties then the advanced tab you should see a spot for advanced settings.

Posted on Jun 21, 2009

  • 1 Answer

SOURCE: hp 2300 laserjet printer error code 13.20.00

this problem persist NVRAM resetting
To perform an NVRAM initialization, complete the following steps:
1 Turn off the printer.
2 Press and hold (DOWN arrow), and turn on the printer.
3 When all three status lights are lit, release (DOWN arrow) and press (UP arrow).
4 Press PAUSE/RESUME. The first item of a menu appears.
5 Use (UP arrow) or (DOWN arrow) to scroll to NVRAM INIT, and press (SELECT).

cihat ALTIN FROM TURKEY ANKARA

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp 4250 error code 55.4


error code 55.4 on HP Laserjet 4250:-The dc controller is not communicating with
the formatter. The problem could be caused
by a timing error or an intermittent
connection
Repair:-
switch off the unit - disconnect power cord
unsrew the two screws holding the formatter in place
( silver plate to rear right)
remove the plastic side panel by sliding
remove the formatter ( silver box you just unscrewed) by sliding toward the rear.
reinstall the Formatter
and re-test
more often than not just reconnecting the controller is enough to clear the problem. theres a good chance it has moved out of position as time has gone by.

Jan 22, 2013 | HP LaserJet 4250n Printer

1 Answer

Laserjet 4250 error 59.00


I've found this specific error code leads you to a main motor failure, Ive found some decent priced motors if you need them: HP 4250 Main Motor

Aug 30, 2011 | HP LaserJet 4250n Printer

1 Answer

Maximum file size for printing on the hp color laserjet 5500n - having issues with pdf files


If you are getting 49.XXXX error codes while printing PDF files, you can try upgrading the machines firmware.
This seems to be a common "PDF file printing" problem with the LaserJet 4250.

Oct 25, 2010 | HP Color LaserJet 5500 Printer

2 Answers

My hp 4250 laserjet printer displays an printer error 57.4 message when i switch it on. what could be the problem? since it can not continue the printer checkup progress.


<P><A href="http://www.printertechs.com/tech/error-codes/error-codes-index.php">http://www.printertechs.com/tech/error-codes/error-codes-index.php</A></P><P>&nbsp;</P><P>Plz check the the link for the detail error codes.</P>

Aug 28, 2010 | HP 4250 Monochrome LaserJet Printer

1 Answer

Repair on Hp laserjet 4250. Printing but smearing black ink on paper


the fuser roller needs to be checked/ replaced. this is in the fuser unit which is availale in the maintenace kit from hp. all instructions in the manuals and on hp website

May 11, 2010 | Office Equipment & Supplies

1 Answer

4250 HP. Loses settings. Correct to show envelope


In the paper-handling menu set the envelope feeder size to the size of your envelope and the envelope feeder type to *any type.

Then ensure you are printing envelopes from your application.

Nov 25, 2009 | HP LaserJet 4350 Printer

2 Answers

59.40 error code


That's a main motor error, something could be jammed in transport, or a generic toner cart. that is too hard to turn, try powering on with toner removed...

Aug 20, 2009 | HP 4250 Monochrome LaserJet Printer

1 Answer

Error during print 'Remove all paper from bin'


HP Laserjet 4250 Network connected laserjet printer.

Steps to be follwed to set right :

01. Please check in number of desktops or laptops it connected.
02. Give proper IP Address in the Desktop or Laptop where it has to be orignally installed.
03. Being a network printer, lot of desktop or laptop users might have printing job iniated.
04. Right click the printer properties which is available bottom right hand corner ikon and delete or cacel all printing jobs.
05. The original desktop or laptop where the IP Address created will be rebooted. System should be restarted.
06. Try to print now to close this solution.
07. Still the problem persits, kindy contact local HP Authorised printer service engineer to set right this issue.

Have a nice working day.

Jul 17, 2009 | HP 4250 Monochrome LaserJet Printer

1 Answer

Print Job enter's queue, but doesn't actually print.


hi thanks for using fixya!

Do you have 32bit or 64bit system?

Mar 24, 2009 | HP LaserJet 4250n Printer

Not finding what you are looking for?
HP LaserJet 4250n Printer Logo

2,354 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...