Question about Pride Celebrity X 3-Wheel Electric Scooter

1 Answer

Pride mobility scooter celebrity x flashing 5 times not working

Motor does not respond although lights and horn are ok, battery are well charged The indicator light flashing 5 times

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Loyalty:

    Visited the website for 30 consecutive days.

  • Pride Master
  • 862 Answers

Hi remove key put freewheel lever into drive & replace key .turn on...,... good luck.,

Posted on Aug 24, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gewiz
  • 1263 Answers

SOURCE: pride mobility scooter. turn key on it keeps

Are you sure that it not in FREEWHELL mode, lever at the back, Regards

Posted on Jun 13, 2009

gewiz
  • 1263 Answers

SOURCE: The lights indicate there is

Hi can you tell me the flash code ? how many imes it flashes before there is a pause etc.

to help you with this check the manual

http://www.pridemobility.co.uk/docs/UK_Celebrity_X_om.pdf

goto page 35.

Regads
Gewiz.

Posted on Jan 02, 2010

  • 16 Answers

SOURCE: pride celebrity 4 wheel wont turn on

Hi
Please Check that your Freewheel Lever is Fully in Position as if is Slightly out of Position it will Not Work,

Gerry.

Posted on Aug 01, 2010

  • 10865 Answers

SOURCE: I have a pride celebrity

Hello dvaldez. The problem is not with the scooter but the battery. When a battery no longer takes a full charge you generally have to replace it. Any auto parts store will test that battery for you to see if it is indeed the problem. This is a free service. Joe

Thanks for choosing Fixya!

Posted on Dec 05, 2010

Ironfist109
  • 3018 Answers

SOURCE: I have a pride gogo

  • What that flash code indicates that there is that the battery voltage is to high to operate the scooter. This can happen for a number of reasons and from out of no where. The manual says you should contact GoGo for this problem. But I know a couple things to try and if they do not work then you need to contact GoGo.
  1. First remove the battery connectors for 5 full minutes and see if that resets it.
  2. You may have a wire that got caught up somewhere so check all wires for breaks in the insulation, cracks etx.
  3. Check the fuse as well.
  4. Push in the main circuit breaker reset button (see diagram)

ironfist109_142.jpg

  • Here is the GoGo Pride Scooter website should you need to contact them and if what I listed does not work then you need to. The things I list are some at home troubleshooting tips GoGo does not offer. They say to contact them immediately. http://www.pridemobility.com/contact.asp
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Posted on Jun 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Pride Celebrity XL8 - problem with right side indicators


hi Stuart, have you check out the actually switch that you pressed to activate the indicators ?

Regards
Rob

Apr 18, 2016 | Pride Health & Beauty

1 Answer

More on Celebrity X motor overheating. Brushes look good. Brake does not seem to be dragging, Batteries are about 5 years old but hold a good charge when not in use for months,


If the motor is overheating, it is drawing far more current out of
the batteries than it is supposed to. Assuming it is 2 x 13v x 33ah
batteries, these are good for about 2 to 3 years on my scooter and 'wheelchair. AGM (absorbent glass mat) lead acid batteries do deteriorate over time due to battery chemistry.

Although the batteries may appear to take a charge
and the voltage 12.6volt x 2 = 25.2 volts nominal, with no load
on them, the motor controller takes a whack of current to get you going.

I have an digital voltmeter/ammeter installed on my Pride XL scooter and I was amazed how much current the motor/motor controller takes from the batteries. 50 to 80amps on startup.

If the battery voltage drops due to the age of the batteries, as the
energy is being used up from them, the current required by the
motor for rotation has to go up, and that will cause overheating of the controller and the motor. It is Ohms law plain and simple
the less voltage available-the more current required to do the
work and current creates the heating effect.

I replace my batteries every two years. Can't take a chance on
being stuck with discharged batteries.

Feb 20, 2015 | Pride Celebrity X 3-Wheel Electric Scooter...

1 Answer

Why won't my pride legend start?


The legend has a Curtis controller. The flash codes you provided points the problem to a faulty throttle pot. If a new throttle does not fix the issue, then your problem is the controller itself.

Sep 03, 2014 | Pride New Mobility Legend 4 Wheel Scooter

1 Answer

Flashing light error


Download the service manual from Pride's website for detailed instructions on what the flashes mean and how to fix it.

Dec 23, 2013 | Pride Celebrity X 3-Wheel Electric Scooter...

1 Answer

I turn key on celebrity scooter. everything looks normal. all lights on, but does not run.


Are the lights flashing or steady? If they are steady and indicate that the battery is charged, make sure that the freewheel/manual brake release lever is in the drive position. If the lights are blinking, then you can visit this site to locate the type of controller on your scooter to try and determine what the problem may be: http://www.pgdt.com/scenter/diagnostics/diagvsi.html
If you continue to have problems, please contact Pride Mobility Technical Support for assistance.
Good luck!

Dec 22, 2010 | Pride Mobility Products Pride Mobility...

1 Answer

I bought this scooter on craigslist, batterys charge but the scooter is giving off a signal like in morse code, 9 blinking lights, the manual doesnt say what it could be. Lights, horn, all work. I've...


If the batteries are good, you have solved 80% of most scooter problems. You have described the following problem:

You have a flash code of 9, that is the status light flashes 9 times, then there is a pause, then flashes 9 times again and the scooter will not drive.

This means that you have an internal controller problem. The only solution to this problem is to replace the controller (computer module). The controller is located under a plastic cover under your feet when you are sitting in the scooter. Remove this plastic cover and remove the aluminum cover of the controller inspecting for burnt and melted wiring.

You should have the manufacturer run the serial number for this scooter to verify the correct component parts (Pride 800-800-8586). Pride can also verify if the parts are covered under warranty. Warranty repairs need to be done by a certified technician or a dealer.

The R series controller for this scooter runs $230 retail. All the associated wiring harnesses plugged into it (if melted or damaged) will run another $230. Labor is about 1 hour and you can do it yourself. Take off all the covers and plug the wiring harnesses in one at a time noting how they are run.

I have seen the wiring and plugs melted where they plug into the controller, so inspect this area carefully.

You can test the motor with a digital voltmeter. Unplug the motor and put your test leads across the red and black connectors . The resistance should be between .5 and 1.5 ohms for a good motor. Test the motor brake by reading the resistance across the 2 white connectors. It should read between 30-35 ohms across the brake. Hope this helps.



Dec 04, 2010 | Pride Mobility Products Pride Mobility...

Not finding what you are looking for?
Pride Celebrity X 3-Wheel Electric Scooter  Logo

Related Topics:

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...