Question about AEG Lavamat W1050 Front Load Washer
I have an AEG OKO LAVAMAT 695 and as I could not see the model listed anywhere put my question here. The machine has started flasking a red F6 on the front panel and there has been some water on the floor. Any ideas. Thanks in advance, Graham
The fault code that you have on your washing machine is in fact Fb (fault block?) and not F6. Your machine is telling you that the water level has gone over the safety level more than 6 times, ie there is a problem with the pressure switch or a problem with a blockage or even a split hose in the air pressure system, ie the thin tube. Before you check these things, have you checked the filter at the bottom of the machine as this can cause the machine to flood if blocked, its worth a try. The pressure tube is a thin tube running from the top pressure switch to the bottom near the outlet area. This shd be free from any blockage, blow into it to see if it is free. and replace carefully. Electrics off the wall, etc,etc.
Posted on May 21, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 24, 2014 | AEG Washing Machines
Aug 20, 2014 | Washing Machines
Mar 17, 2013 | AEG Washing Machines
Jan 14, 2013 | AEG Lavamat 72640 Front Load Washer
Aug 16, 2011 | Washing Machines
Jul 09, 2010 | AEG Lavamat 72640 Front Load Washer
Feb 11, 2010 | AEG Washing Machines
Dec 29, 2009 | AEG Lavamat 72640 Front Load Washer
Oct 19, 2009 | AEG Lavamat 72640 Front Load Washer
May 23, 2015 | AEG Lavamat W1050 Front Load Washer
300 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: