Question about Shure SM58 Professional Microphone
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
That is a great mic. It has a lot to do with the room your in and acoustics of it. If you are too close to your PA or monitor, it will also feedback. Lowering treble and reverb will also help.
Posted on Nov 04, 2007
SOURCE: shure sm58
There not that much to take apart on the sm58. On page 2 of the user manual there is a wiring diagram to reconnect wires. the grill wind filter part screws on. The socket on the bottom is secured with a screw.
I am more than happy to answer any other questions you may have about it, please get back to me here, or use the ASK function to go straight to me :) If you are still unsure, have problems, or we need to look at the situation more deeply, then before you give a rating for this advice, hit the ASK button Thanks for using FixYa, If you consider the advice I have given you as sound, a FixYa rating is a great reward for my efforts to help you. Cheers.
Posted on Jul 04, 2008
SOURCE: Reparing a Shure SM58
If your talking about the coilwires on the diaphragm, you have to be very good at soldering with a variable temperature contolled soldering station, good magnifiers and pretty much one shot a doing it. You will have to carefully remove the varnish from the wires and bridge the broken gap with more of the same diameter wire. You are better off replacing the capsule. Hope this helps.
Posted on May 26, 2009
SOURCE: re-solder shure sm58
If you're careful, you can solder it yourself.
Just solder some thin wires to the lose ends.
After soldering use some cellotape to isolate the solderingjoint and to attach the wires to the element.
If you're not familiar with soldering tiny things, please don't. Any technician can fix it for you.
Posted on Mar 05, 2010
Tips for a great answer:
Apr 17, 2012 | Shure PGX2/SM58 Microphone
Nov 20, 2010 | Shure SM58 Professional Microphone
Aug 28, 2010 | Shure SM58 Professional Microphone
Mar 01, 2010 | Shure SM58 Professional Microphone
Jan 05, 2010 | Shure (LX287CC) Professional Microphone
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: