Question about Guillemot Hercules Deluxe Webcam

1 Answer

What network will the hercules webcam work on best......skype? msn? what do you recommend?

Posted by on

  • currypot2009 Mar 09, 2009

    Why cant people see me in chat rooms on my camera ? i have the same model. Any help appreciated its beeing recognised by windows xp and i can see myself in the webcam station tool but noone can connect to my camera and see me i can see them !

    Thanks,

    Cuz

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Webcam


Go to the logitech website.
Install the drivers for your particular model of webcam.
Usually this comes with a software...
This will get you working your webcam correctly

Now,
Seeing your sis depends on the software you are using to talk with her.
GTalk, Yahoo messenger, msn messenger, Skype etc. will allow you webcam data transfer...

Skype is free and i would recommend that. Just sign up. Its free.

Jul 18, 2010 | Logitech Webcam

1 Answer

As soon as the xtra controller window appears I get a message saying "hercules Xtra Controller Main application has encountered a problem and needs to close". So although I can use use the webcam to record...


I suggest to reinstall the driver and see if the issues reappear ..remove all trace of the driver in computer by uninstalling it and delete the folder in program files ..and after that install it clean ..It may be a virus or something in conflict so only use it single when you capture..
another advice is to not use the am cap installed with it ..but use it in windows movie maker .and you will have a better control and ability to edit the product ..

Jul 05, 2010 | Guillemot Hercules Dualpix HD 4780428...

1 Answer

MY WEBCAM IS NOT WORKING ON MSN OR SKYPE


Try the free webcam test tool and select the C200 from the drop down list. If you can see yourself the webcam is working, if not you will need to reload the driver software. If it is working launch Skype, and go to Settings, Camera to select the C200 and it should work. To select webcams in MSN click Tools, Audio & Video set up, Next. It should give you the option to choose what camera you want to use.

May 09, 2010 | Logitech WEBCAM C200

1 Answer

Webcam


You both have to be in the same program to use your webcams.
You cannot hear her msn - this is probably a failing on her set up (mic)
She may have a laptop with a built in mic and she needs to nominate her webcam mic as default so that msn/skype software can locate it.
I suggest you both follow these instructions
Audio
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to MSN
Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

Having proved your cam is working ,you can configure it to WLM (MSN)

CONFIGURE SOFTWARE to MSN
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the MSN software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Open MSN
Click 'Open Menu'
From 'Tools; navigate to, and click, 'Audio and Video setup'
Set your speakers
Click 'Test' - if OK, move on.
Set your mic as default
Use the slider to set volume and test.
Click 'Next'
This takes you to the video setup
Your webcam should be broadcasting - (if not - make sure the webcam is set as default - restart MSN)
Use 'Webcam Settings'to fine tune the picture.
Click 'Finish'

Configure to Skype
Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
Not working ? - troubleshoot your drivers and software - get your cam working before moving on

Working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

May 07, 2010 | Logitech Webcam

1 Answer

Hi ihave an acer aspire 5600 .My webcam works with other aplications but not on skype and msn.Could you please help me?


Before you can use your webcam in any chat program you have to configure it to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

WINDOWS LIVE MESSENGER ( MSN)
Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

Having proved your cam is working ,you can configure it to WLM (MSN)

CONFIGURE SOFTWARE to MSN
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the MSN software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Open MSN
Click 'Open Menu'
From 'Tools; navigate to, and click, 'Audio and Video setup'
Set your speakers
Click 'Test' - if OK, move on.
Set your mic as default
Use the slider to set volume and test.
Click 'Next'
This takes you to the video setup
Your webcam should be broadcasting - (if not - make sure the webcam is set as default - restart MSN)
Use 'Webcam Settings'to fine tune the picture.
Click 'Finish'



Feb 09, 2010 | Logitech Quickcam Chat Webcam

1 Answer

I have the Hercules Dualpix hd webcam and downloaded and installed the Webcam Station Evolution 3.2.2.1 and the Xtra Controller.When using,both of these pop up,but after a few seconds the picture...


Copy this site and paste it in your browser address bar and hit ENTER.

http://download.cnet.com/ManyCam-Virtual-Webcam/3000-2348_4-10593500.html?tag=mncol

to your web browser and paste it in the Address Bar and hit ENTER.
Then download the program and install it to start having fun with your camera and friends.

Manycam allows you to use your Webcam with multiple programs at the same time. Broadcast your
Webcam on MSN Messenger, Yahoo!, Skype, AIM, Paltalk, and Camfrog all simultaneously. Manycam
also allows you to add cool live CGI (computer generated special effects and graphics) to your
Webcam. Make it appear as if your face or hand is on fire with our "fire" effect.
Pretend you are underwater or make it look like it's snowing inside your house with the
Manycam underwater and snow effects. Add text, graphics, or your country's flag to your video
window.

ManyCam is the freeware tool for you if you use both CamFrog and ICQ, or any other video chat
program, and you want to use them simultaneously. It creates a "virtual" Webcam that
replicates your currently installed camera. It then lets multiple applications
access the video stream without conflict.

ManyCam is compatible with Yahoo, MSN, CamFrog, PalTalk, ICQ, Skype, YouTube, and more. Once
you've installed ManyCam, you need to set ManyCam as the primary input for program that you
want to use. ManyCam will automatically start when you activate your Webcam through that
program. The application includes a bunch of gimmicky features that let you change aspects of
the background and foreground. You can map a new pair of cartoon eyes over your face, and they
track pretty well to your movements, or you can show that your life is hell by replacing the
background with flames.

NOTE: There is an unfortunate toolbar that will install unless you opt out during setup, but
other than that ManyCam is worthy of a Webcam Oscar for cool and useful tech.

Hope this is of some help. Bud

Jan 26, 2010 | Guillemot Hercules Dualpix HD 4780428...

1 Answer

How to set the web cam on chating via skype


Normally you can do video call.
While chatting and enable the video is possible with the latest version of skype 4.1.0.179

Another options also is to use is use a other software for video like msn or yahoo messenger.

First I would recommend you to download the latest version of skype
Follow the link :(www.skype.com/download/)
While configuring be sure to use the following setting:
1.Start skype.
2.In the navigation pane of the Skype Options window, click Video Settings.
3.Adjust quality of picture in 'Settings
4.Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
If you need further help you can log onto:
(http://support.skype.com)
ok

Jan 02, 2010 | Logitech Quickcam Chat Webcam

1 Answer

I just downloaded skype.. how do I use a webcam with it? It is a SilverCrest 1.3 mpixel WC2130 webcam. brid


skype wil see you webcam and install it
try also msn with the webcam configuratie if thad works skype wil work also

Aug 14, 2009 | Webcams

1 Answer

My webcam is connected to skype but wont go on msn whats the problem ??


u need to select it in the settings
i have had my webcam on skype running ok
but when i use msn for video it freezes my pc so i dont use it on msn

Jan 23, 2009 | Logitech Quickcam Chat Webcam

Not finding what you are looking for?
Guillemot Hercules Deluxe Webcam Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Guillemot Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Guillemot Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...