Question about Phones

Open Question

BT Elements- 3 handsets stopped working

I don't know if you can help as the Elements phone is not on your list? & I have mislaid the instruction booklet!
Anyway I have 3 handsets & 2 chargers. Last night one of the handsets lost its power (thanks to my son, say no more!) therefore when I tried to locate the handset the pager did not work.I found the phone, and put it on to charge. However I found that none of the handsets have their individual location names on any more, and won't let me re-program the set up or connect with the telephone line! Each Handset has flashing Logo ' Base 1' so I rather think this means that somehow or other they have lost their registration with the base station? Plus when I try to access the ' Setup ' section on the menu, the action is unavailable! Grrr!

Would you possibly have any suggestions as to how I might solve this problem please?

Kindest Regards

Eileen Aaron

Posted by on

6 Suggested Answers

SOURCE: Main handset won't work; additional handsets do.

Check that you have the larger power adaptor connected to the base unit.

Posted on Jun 09, 2007

SOURCE: Power went off last night and our phone stopped working

I had power outage last night now corder at&t 1855 led's keep flashing keeps telling me about power outage before every new message. How do I get rid of the flashing?

Posted on Jun 19, 2008

  • 6 Answers

SOURCE: BT Studio 3100 handset 1.

The handset seemed to function approx 3hours after i posted the problem, it let me register the handset with the base, and now everything all ok.

Posted on Jul 12, 2008

  • 31 Answers

SOURCE: No dial tone in Clarity C4230 setup

if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.

Posted on Apr 16, 2009

  • 1 Answer

SOURCE: Uniden DSS7955 Cordless phone problems

I had the same problem!

What you need to do is hold the "end" and "#" key for 5 sec, which will deregister the headset then all you would have to do is place it back in the base for it to registered again.

Posted on May 06, 2009

  • 1 Answer

SOURCE: BT Studio 3500, Base station,

bt studio 3500 says memory full do not have 1571 how do I clear answer machine

Posted on Aug 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Caller display doesn't work


From the BT website...

"If you are using your phone on a broadband line make sure you fit an ADSL microfilter between the telephone line cord and the telephone socket."
I'm guessing you have one on the landline, probably next to the router but not the handset base :-)
Why is my Caller Display not working Help BT com Help

Apr 23, 2014 | Phones

1 Answer

BT Aura 1500 Quad telephone - calls list freezing


BT gave me solution, which (so far) seems to work:
Reset the software of the telephone to default settings...
On any handset - 1. Press 'menu' 2. Scroll to 'settings' & press 'ok' 3. Scroll to 'base' & press 'ok' 4. Scroll to 'reset base' & press 'ok' 5. 'System PIN' will be displayed - enter '0000' (unless you have altered the default pin number) 6. Press 'ok' 7. Press 'yes' 8. Switch the main base station off at the power & remove the batteries from all handsets for approximately 30 minutes .
This didn't reset my address book (thank goodness) but did reset some other settings, such as time/date, OGM, group ringtones etc.

Jan 15, 2013 | Phones

1 Answer

Additional handset on BT Synergy 6500 phone is stuck on 'Test Mode'


is possble to use 8 bt 6500 hand phones via 2 base unit on the one bt line

Feb 28, 2012 | GE 25942GE2 Cordless Phone System

1 Answer

Flashing green light on base unit BT Studio 3500


The flashing green light is the in use indicator on the base. Click the scroll button down on the handset to show the call list, then press the x or secrecy button, then press the tick or menu but to confirm, the call list is now empty and the green light has stopped flashing, You need to repeat this for each handset until complete

Oct 11, 2009 | Dual Phones

2 Answers

BT Studio 3500, Base station, flashing telephone. Base staion handset, flashing message icon 2nd handset, flashing telephone and handset. Why the flashing and how do I cancel all the flashing.


eventually contacted the BT team via telephone and apparently this is a common problem when using BT products with Talktalk & Virgin. To overcome this in the majority of cases, dial 1571 and connect to your voicemail, listen to the options and finally delete all messages. Hope this can be added to your list of solutions.

Sep 17, 2008 | Phones

4 Answers

BT Studio 1000 4 handsets


To Mrs Sue Groom,
You probably need to register the handsets to the base.This is the user manual for the BT Studio 1500
http://www.shop.bt.com/content/uni2/documentation/43py/023626.pdf

Mar 21, 2008 | Xact Communication XG2200 Cordless Phone

4 Answers

IDECT cordless phone, on small round base


I have verge 500 twin, the handset just stopped responding to the base and i have not found the manual to check trobleshooting.

Feb 21, 2008 | Uniden Cordless Phone

6 Answers

Phone instruction manual


I have a .pdf file of the owners manual for the Ativa D5772 phone system. Is this the phone you're looking for?

Nov 28, 2007 | Office Depot Ativa D5772 Phone

4 Answers

BT Freestyle 2200 I am having problems obtaining a dialing tone on both of my handsets. When I press the green button for a line out it just beeps 3 times and cuts off. There is charge in both the...


hi just want to help others as desciption aint complete above

Registering a BT Freestyle 2200 handset
1. If there is a handset in the base remove it whilst you are registering the new handset.
2. Press and hold the PAGE button on the base for about 10 seconds until you hear a beep and the In Use light starts flashing.
3. On the handset to be registered, press and hold redial & CALLSd buttons together until display shows 65-.
4. Enter the base number. If this is a new handset then the base number is 1, the display shows 65-1 then PIN. which is normally 0000
5. Enter and registration starts. When the handset beeps and returns to standby registration is complete.

Nov 08, 2006 | British Telecom Freestyle 2200 Trio...

Not finding what you are looking for?
Phones Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96396 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4754 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...