Question about Hitachi 50GX30B 50". Rear Projection Television

1 Answer

50GX30B IS MY TYPE OF CHALLENGE WITHOUT MY REMOTE, WHICH IS LOST, I GO TO MENU AND CHOSE DIGITAL ARRAY, WHEN THE SCREEN CHANGES TO THE 9(NINE) +'S I CAN'T SEEM TO MOVE THEM RIGHT OR LEFT TO MAKE THE OR WHAT I THINK IS " PROPER ADJUSTMENTS". HELP. FIRST OF ALL, DON'T FORGET,,,, I'M A DUMMY!!! please before ,, it's the tv ,, remember i am stupid

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try www.remotes.com in Portland Oregon. I bought one on-line from them and it comes with a guarantee to work, as well as new batteries all installed. Cost me $62,45 but worth it since you can only make adjustments with the remote (as long as it isn't too extreme) then you need to get hold of a service manual (which I am still hunting for)

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just told someone there i lost the instucion maunual for the hitachi clu-4311ug remote i need to know to know what buttons to fix the digital array


post the model number of your Hitachi and I will post the instructions for controlling the array with your remote.

Jul 06, 2012 | Hitachi Televison & Video

1 Answer

DIGITAL ARRAY ADJUSTMENT ON FRONT PANEL WILL REMOVE GHOST IMAGE ON SCREEN


Replace both of the convergence ICs. STK392-110 use 120s Mats
1-800-628-1118

Nov 01, 2010 | Hitachi 50GX30B 50". Rear Projection...

1 Answer

How to acess set-up menu without factory remote


The manual can be found near the bottom of the Product page for this TV.

From the manual, pg 11 -

If you misplaced your Remote Control you can still access most settings via the MAIN MENU screen when you press both CH UP (8) and DOWN (9) on the TV set. Some features of your TV Set will not be accessible without the Remote Control. If you lost your Remote Control, contact a Sharp Authorized Servicer by calling 1-800-BE-SHARP for a replacement.

Let us know if this fixes it for you.

Feb 11, 2009 | Sharp 25N-M100 25" TV

1 Answer

Tv out of alignment double words digital array wont work lost re


Go to www.remotes.com to order a new remote. I ordered one there and was very satisfied with the speedy delivery and guarantee that it will work for your system. Cost me $62.45 shipping included. Mind you it was shipped from Portland Oregon to New Brunswick Canada, so it was a fair price by comparison.

Hope this helps....

Jan 20, 2009 | Hitachi 50GX30B 50". Rear Projection...

1 Answer

Hitachi 50GX30B I need to align Digital Array no original remote


Unfortunately, it looks like you will need the original remote. I found one at www.remotes.com Give it a try. Good luck.

Dec 13, 2008 | Hitachi 50GX30B 50". Rear Projection...

1 Answer

Projection TV red is drooping


Do an internet search on "Hitachi Convergence Circuit". This apparently happens all the time. TV repairmen charge about $400. Parts are less than $50 but you would have to be an expert at soldering electronics circuits to replace it yourself.

My TV had the Blue misalign instead of the Red. I ordered the kit #9 from http://www.bdent.com/search/part.jsp?partnum=KIT9

DO NOT ATTEMPT IF YOU DO NOT KNOW HOW TO SOLDER. YOU WILL PROBABLY RUIN YOUR TV.

Aug 15, 2008 | Hitachi 50GX30B 50". Rear Projection...

1 Answer

Digital Array?


Replace IK04 and IK05, both STK392-110, but use instead STK392-150's for greater reliability. And don't get some Chineese knock-offs - use original Sanyo replacements. If you don't know where to get those try ACME Enterprises in Florida,
http://www.acme-sales.net/index.shtml
Also measure the low ohm feed resistors in that circuit. However usually just replacing the convergence amps will restore normal video...
Bill

Nov 17, 2007 | Hitachi 43FDX01B TV

2 Answers

Color Allignment


press menu on the remote and then u will be able to align the blue

Oct 30, 2007 | Hitachi 50GX30B 50". Rear Projection...

1 Answer

Digital Array?


I have the very same problem. Was there a solution to landfill2004?

Nov 13, 2006 | Hitachi 50GX30B 50". Rear Projection...

2 Answers

Macintoshes and the RP614 Router Gateway


You need a Macintosh computer running MacOS 8.6, 9.x, or 10.x. (Netgear products are not supported for versions of MacOS before 8.6.) You can use the RP614 with an eMac, iBook, iMac, PowerBook, PowerMac, or PowerPC as long as they are running one of these versions of MacOS. You also need a few Ethernet cables to make the connections between the router to your modem for internet connection and from the router to your computers or peripherals. Topic 2. How do I prevent my Network configuration from being lost when I restart my computer? When making configuration changes for MacOS it is best to use Configurations (MacOS 8.x or 9. x) or Network Location (MacOS 10. x) settings instead of just changing settings for each category (TCP/IP, AppleTalk, AirPort, etc.). If you just make changes to your settings, they may be lost when you restart your computer unless you have saved them in a Configuration or Network Location. To create a Configuration in MacOS 8.x or 9.x: 1. Open AppleTalk (or TCP/IP) from the Apple Menu in the upper left-hand corner of the screen. 2. From the pull-down File menu select the Configurations option. 3. Choose New Configuration. 4. Type in a name for your new configuration (Netgear Router). 5. Make your changes to the AppleTalk (or TCP/IP) settings. 6. When you close AppleTalk (or TCP/IP) choose Save Changes. Whenever you make Configuration changes for settings in MacOS 8.x or 9.x, open Configurations from the File menu or by pressing Command-K. Saving your changes in Configurations means that they will not be lost when you reboot your computer. To create a Network Location in MacOS 10.x: 1. Open the Apple Menu by clicking on the Apple icon in the upper left-hand corner of the screen. 2. Select System Preferences. The System Preferences window displays. 3. From the System Preferences window click Network under Internet & Network. The Network settings window displays. 4. Click the Lock icon (if necessary) in the lower left-hand corner of the window to unlock the Network window so you can make changes. (You may be asked to type in your User Name and Password.) 5. Click the pull-down menu next to Location at the top of the Network window. 6. Select the New Location option. 7. Type in a name for your new Location and click OK. 8. Make your changes to the TCP/IP, AppleTalk, and AirPort settings. 9. Click the Lock icon in the lower left-hand corner to prevent further changes. The Apply configuration changes? Window displays. 10. Click Apply to apply the configuration changes for the newly-created Location. 11. Close the Network window. Topic 3. How do I connect a Macintosh to the RP614 Router Gateway? MacOS 8.6, 9.x, and 10.x 1. Set up your system for installation. 2. First make sure your ISP connection is working. Try testing your computer with the ISP directly to make sure you can successfully make a connection to the internet. 3. Connect your DSL or cable modem to the Netgear Router. 4. Log on as Administrator (if required for your system to make configuration changes). 5. Quit all other applications. It's best when configuring MacOS 8.6 and 9.x to use the Configurations settings for AppleTalk and TCP/IP because they should then retain their settings when you reboot. (Use Network Locations to save your settings changes in Mac OS 10.x.) If you just change the settings but don't use a Configuration or Network Location to save your settings changes, you may lose those changes when you restart your computer.

Feb 19, 2006 | NetGear RP614 Router

Not finding what you are looking for?
Hitachi 50GX30B 50". Rear Projection Television Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...