I just got a HPpsc 1210 xi all in one printer. I have it installed, but don't have a clue how to work it. I bought it 2nd hand and there isn't a users manual. Can you help me?

HP's site says support for this printer is built into Vista. This document you can download explains how to make it work.They don't offer any other driver software for the printer.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=90764&

hp website has all drivers

Try this solution from HP, this may work http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu01850&cc=us&lc=en&dlc=en&product=90764

Hi,

You can download the required installation drivers and software from manufacturer's site by clicking this link

On the page which opens, select the operating system (Windows XP/Vista,etc..) of your computer to download the appropriate drivers and software.

Hope this solves your problem. Thanks for using FixYa.

If this issue occurs, after installing the new version or revison of internet explorer then try to download the "Critical update to resolve an issue with HP Director after installing a new revision of Internet Explorer" from HP Website if the operating system is Windows XP.

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&dlc=en&cc=us&lang=en&product=90764

If this issue occurs, in general follow the below instructions to solve the issue.

1. Download the HP Officejet J6480 All-in-One Printer
2. Install the HP Officejet J6480 All-in-One Printer while installing do not connect USB cable at any point of time if it asks, check USB connect later
3. Download the HP PSC 1210 All-in-One Printer
4. Install the HP PSC 1210 All-in-One Printer connect the USB cable when it asks to connect

Download the printer full feature software based upon your operating system.

HP Officejet J6480 All-in-One

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3635378&lc=en&cc=us&dlc=en&lang=en&cc=us

HP PSC 1210 All-in-One Printer

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=90764&lc=en&cc=us&dlc=en&lang=en&cc=us


This should resolve the issue.

To print a Web page that has frames, follow these steps:

On the File menu, click Print.
Click the Options tab, and click one of the following options:

• 'As laid out on screen'
• 'Only the selected frame'

NOTE: Use this option when you want to print only one frame. Click within the frame, to select it for printing, before you start the printing process,

'All frames individually'
Click Print.

This article is from the Microsoft KB Article 255076

the encodder stripis looseor broken /damaged.make it proper.

install the drivers of your printer again. and change the usb wire if it is to old.thats it.

try to locate this file from drive software disk or re-install the setup. bye