Question about GE Advantium SCA2000B Microwave Oven

1 Answer

I have an Advantium SCB2000Cbb02, it quit with and Error F4

While cooking popcornI got an F4 error

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 9,042 Answers

Sorry, but subject line was too long and it got cut off. So if this does not address all of your symptoms, please reply back with more details.

F4 means you have an open humidity sensor that needs to be replaced.

There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

See this link before you start: http://www.microwavedisplay.com/safety.txt

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only microwave not working


Chances are you have a bad secondary / cook relay on the control circuit board. The relay can be replaced. See details here.

Jul 06, 2013 | GE Advantium 120 Convection/Microwave Oven

1 Answer

Kenmore Gas Range model # 362.75491990 F3 error Oven will not hold temp - error message displays and beeps I Replaced the oven temp sensor same issue Is the control panel bad?


Hi,

Many models of the GE microwave have sensors that can detect humidity from the foods you are cooking. This allows the microwave to make adjustments to the power levels used to cook your food. If "Sensor Error" appears, you should either press "Clear" to cancel the mode or leave the food in the appliance longer to give the microwave more time to detect the food.

Press "Time Cook" to manually enter the time if you receive an error message when trying to use the "Sensor Reheat" mode of your GE microwave. The error message may be caused by the food item being too large or too small to detect.

these are some other code error that will help you in case of next time.

  1. Step 1 Press "Off/Cancel" (or "Cancel/Off" depending on your model) to clear the error code. Note the code if it reappears.
  2. Step 2 Replace the touchpad if the code displayed is "F0," "F7" or "F10." A function key is stuck or shorted.
  3. Step 3 Replace the touchpad or the clock (ERC) if the code "F1" is displayed. Disconnect the ribbon connector to the touchpad. If no code is displayed after an hour, replace the touchpad. If the code displays again, replace the clock.
  4. Step 4 Replace the oven temperature sensor if "F2," "F3" or "F4" is displayed. "F2" indicates the oven temperature is too hot and the oven temperature sensor is suspect. "F3" or "F4" indicates the oven temperature sensor or shorted or open.
  5. Step 5 Replace the ERC if "F5," F6" or "F8" is displayed. The ERC is the main control unit. "F5," F6" and "F8 are codes that indicate problems in the ERC functions.
  6. Step 6 Inspect the door-lock assembly and circuit if "F9" is displayed. The door must lock when the oven is in use. If the lock mechanism is not functioning or if the detection circuit is malfunctioning, the stove will display "F9."


jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); }); NOTE:


"F3" codes mean your oven temperature sensor has failed or shorted out. The only thing you can do is to replace the sensor.

Take care.

May 11, 2010 | Microwave Ovens

1 Answer

I have a GE profile advantium 120 . The panel lights up I do not get an error code the timer works but it does not heat up. what could cause this


Check your power setting, making sure that you are cooking at 100%. Adjust if necessary.
It could also be a bad magnetron.
Regards, --W/D--

Jul 05, 2009 | GE Advantium 120 Convection/Microwave Oven

1 Answer

F3 error


So far so good we unplugged the machine took the filters off the bottom let everything dry out over night and it seems to be working I'll update you tomorrow. I think the steam got the control pannel wet.

Jun 24, 2009 | GE Advantium 120 Convection/Microwave Oven

1 Answer

MICROWAVE JUST QUIT


THERE IS A FUSE INSIDE THIS MICROWAVE IT MAY HAVE BLOWN. HAVE SOMOENE THAT CAN OPEN IT UP FOR YOU AND CHECK OR CHANGE THE FUSE.

Apr 11, 2009 | GE Advantium 120 Convection/Microwave Oven

2 Answers

New GE Microwave JVM1750DM1BB with F4 error in Sensor cooking


GE
Microwave Fault Codes Failure
Code
Condition Check/Repair F1 Open sensor, will occur below 190F of cavity temperature within 15 minutes after starting convection, combination or roast cook Check oven temperature sensor for continuity. Replace if zero or infinite ohms F2 Shorted thermal sensor, will occur if a shorted thermal sensor is detected continuously over 5 seconds on convection, combination or roast cooking Check oven temperature sensor for continuity. Replace if zero or infinite ohms

Note: It will take a minimum of 5 minutes of convection run time before F1 or F2 code will be displayed if the thermal sensor is shorted or open. F3 Shorted key panel (touch pad), will occur if a shorted key panel is detected continuously over 60 seconds Replace key panel (touch pad) F4 Open humidity sensor, will occur if humidity sensor is detected as being open continuously over 5 seconds Replace humidity sensor F5 Shorted humidity sensor, will occur if humidity sensor is detected as being shorted continuously over 5 seconds Replace humidity sensor F6 Shorted temperature probe, will occur if temperature probe is detected as shorted continuously over 5 seconds Replace temperature probe ProbEe Open temperature probe, will occur if temperature probe is detected open, or not plugged into the receptacle If probe is plugged in and "ProbE" is on display check continuity of the probe with an ohm meter. If zero or infinite ohms, replace it

Feb 08, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

2 Answers

F3 Error Message


It needs a new key pad it is shorted the ge website has a list of error codes f3 is the keypad

Jan 31, 2008 | GE Advantium 120 Convection/Microwave Oven

Not finding what you are looking for?
GE Advantium SCA2000B Microwave Oven Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9042 Answers

D. E. Hev

Level 3 Expert

1167 Answers

 Larry
Larry

Level 2 Expert

115 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...