Question about Samsung Dryers

1 Answer

Replace the drive belt for the dryers drum

Im not sure this is the same dryer but its the dryer with round glass porthole. i just need the diagram of the belt configuration and where the idler pulley spring goes

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 9,472 Answers

What is the model number?

Posted on Nov 04, 2012

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: dryer belt configuration diagrams for my frigidaire/kenmore

I have a kenmore dry which squeeks when drying. I out uggs in then it made noise. Its a 417

Posted on Feb 14, 2010

  • 22 Answers

SOURCE: how to put on dryer belt mod #65760, idler pulley

there should be a diagram for the belt installation in the bottom somewhaere, or in the manual

Posted on Oct 16, 2010

rickead1
  • 1998 Answers

SOURCE: Hotpoint dryer model NBXR463EB0WW -

first click this link and watch this video http://www.youtube.com/user/RepairClinic?v=zpUqCrLaI7g&feature=pyv&ad=5544346181&kw=dryer%20belt&gclid=CI7yoK7z8qcCFRNrgwodjlNFbg its basicly the same repair for your machine the belt goes around the pulley and you pull the pulley back that adds the tension to the belt when ever you repair the belt in the machine you should also replace the pulley and the rollers as well this usually comes as a kit but if you dont ask for it as a kit most places break the kit in to three seperate pieces to make more off the sale notice in the video how the belt goes around the pulley if you have any further questions message me back i will be flying this week from hawaii to the east coast and will be returning on thursday so if i dont see your post by tomorrow i will message you back on thursday if you have any further questions Thanks Rick

Posted on Mar 29, 2011

hunter19_46m
  • 7482 Answers

SOURCE: need to know if I can get parts and what part #'s available for Whirlpool/ Roper electric Dryer lme4600w2. For blower wheel,blower wheel belt, idler pulley, & drum belt.

Hi Alisa Wilkerson...
Try one or both of these on-line websites...they also have phone support (free)
1... http://www.appliancepartspros.com/ (1-877-477-7278)

2... http://www.partselect.com/ (1-888-895-1535)

Good luck, I am sure they will be able to help
Bud

Posted on Sep 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rollers keep going flat and breaking belt


May I suggest you do a little detective work?
I see different models of dryer have different rollers.
Could you look to see if your rollers are supposed to be rounded or flat?
It depends on where they support the drum.
I have both for use to fix dryers.
Then, look to see the surface of the drum.
Is the round roller supposed to fit in a rounded slot?
If so, is the drum falling out of the place it is supposed to ride?
I have had that happen when I was moving the dryer, and I tipped it over, and the drum fell out of its place inside the machine.
Sounds like a roller fix will make the belt go longer.
Oh yes, be absolutely sure the rollers are free wheeling and move on their shafts freely back and forth, as well as spinning.
Be blessed.

Apr 16, 2013 | Dryers

2 Answers

Rear bearing


We have made a few videos on these dryers and there are some very good repair guides on these.
if you need parts please feel free to see site or contact me with the full model number of the ID plate How-to-Repair
How replace the bearing kit

And if you have the type with a fixed Riveted Drum shaft then you will need this video


In our repair guides you will find help on all the tumble dryer problems


How to Repair Need help fixing your appliances Need help fixing your appliances

Feb 06, 2013 | Hotpoint Belt Drum Drive for VTD00, VTD20,...

1 Answer

How to put a belt on the dryer


Belt Dryers have a drive belt that turns the clothes drum. If the belt breaks, the drum stops rotating. Then you need to replace the belt, and often the idler pulley, because the pulley tends to wear out at the same time. Click here for a belt installation diagram

Dec 31, 2009 | Kenmore Dryers

1 Answer

Older model dryer--drum will no longer spin. Need


The model number you provided is for a White Westinghouse. In order the access the internal cabinet to view the drum, you will need to lift the top panel. This is accomplished by inserting a putty knife along the front seam where the top meets the front of the dryer. About 2 inches in from each side is a small retaining clip. Push in with the putty knife and the top should pop free and lift up. The belt should be visible around the drum if it still intact. If the belt is loose, or missing, it has probably broken.

NOTE: The only way a belt will come off the drum while enclosed in the cabinet is if it breaks.

CAUTION: Make sure you UNPLUG the dryer before servicing. Dangerous voltage is still present inside the dryer even with it turned off.

To access the drum to replace the belt, you will need to remove the front panel. Remove the lint screen and lint screen cover in the door, first. Then, remove any screws holding the panel in place. The belt can be installed with the drum in place. Simply loop it around the drum first, then feed the remaining portion of the belt behind the blower fan housing and loop it on to the drive motor pulley and belt tensioner.

The part number for a replacement belt (if required) is 134503600. You can purchase a new one at any of the following websites:

searspartsdirect.com
appliancepartspros.com
pcappliancerepair.com
repairclinic.com

Prices vary between these sites, so shop around for the best deal. The first three sites also offer very helpful exploded view parts diagrams you can use as reference. Repairclinic.com will have diagrams to show up how to properly route the dryer belt. Just click on the "Repair Help" link, followed by the "Dryer Belt Diagrams" link under the "Special Features" section. Refer to Diagram G under Westinghouse.

If you have any questions, or require additional assistance, please let me know. I hope this helps you.

NOTE: If the belt isn't the problem, please let me know.

Oct 10, 2009 | Dryers

1 Answer

Maytag Performa PYE G2200 gas dryer, the dryer seems to turn on but the drum will not turn.


Based on the information provided, it sounds like a broken drum belt is at fault. Below is an illustration of the drum belt.
http://www.repairclinic.com/SSPartDetail.aspx?s=t-PYG2200+-%3d%3di529597&PartID=529597

Here is a parts/disassembly diagram:
http://www.repairclinic.com/Dryer-Gas-Maytag-Style-Appliance-Diagram

Here is a belt installation diagram:
Dryers have a drive belt that turns the clothes drum. If the belt breaks, the drum stops rotating. Then you need to replace the belt, and often the idler pulley, because the pulley tends to wear out at the same time.

Click here for a belt installation diagram.

All links courtesy of www.repairclinic.com

Aug 16, 2009 | Maytag Dryers

1 Answer

My dryer is sqeaking loudly when running


Squeaking usually comes from drum roller supports and/or the belt idler pulley needing lubricated. If the drum does not have drum roller supports under the drum, it will be equipped with a plastic drum glide the is located around the perimeter of the front drum facing. If this plastic wears down it will cause the drum to scrape against the metal bulkhead and make noise. If equipped, you need to replace the drum glide

The drum rollers (if equipped) can be lubricated with a light weight turbine oil (like the kind you would lubricate some ceiling fan motors with). Lubricate the roller wheels at the axle ONLY. Do not lubricate the wheels. The same is true for the idler pulley. Make sure you don't get any oil on the belt, or it will slip.

If you need instructions on how to reinstall the drive belt, repairclinic.com has dryer belt diagram illustrations under their "Repair Help" section. Look for the "Dryer Belt Diagram" link on the left hand side of the page. If your dryer is a GE model, you would use diagram M, D, or L (depending on the age of the dryer).

If you have questions, let me know. I hope this helps you.

May 06, 2009 | GE 7.0 Cu. Ft. Super Capacity Gas Dryer

3 Answers

How to change a drive belt on a candy CDC266 tumble dryer


don't know what make you have but if you go to sears .com click on parts put in your model number(inside dryer door)you will find a break down of everything you need to know,let me know how you do-mike

Oct 12, 2008 | Candy CDC266 Dryer

1 Answer

My hotpoint vtd20 dryer is vibrating when running. When stopped, with my hand i can barely turn the drum (not sure if it turned easily before) any advice?


hi Step 1: Locate the belt by removing the back or front service panel. Depending on the type of dryer you own, you may have to prop up the drum to keep it from sagging. Don't let the drum hang; the bolts that hold it in the cabinet could be damaged. Don't remove any more parts than necessary.
Step 2: Identify the belt. The old belt may be threaded around the idler pulley and motor drive shaft. Draw a diagram showing how the pulley is installed so you'll be able to replace it properly. If the old belt is worn or frayed, but not broken, leave it around the drum as a pattern for positioning the new belt; cut the old belt and remove it when the new belt is in position.
Step 3: Remove the old belt from the pulleys and stretch the replacement belt into place. The new belt must extend around the dryer drum and the pulleys. The trick is to align the belt on the drum with the pulleys -- the ribs on the new belt go against the drum.
Step 4: Once the belt is aligned, turn the drum by hand, if possible, to make sure the belt is tracking. You may have to reassemble part of the cabinet to do this.

Some older dryers have a V-belt pulley drum drive. With this system, two or three pulleys of different sizes set the speed of the drum. To change this type of belt, decrease the tension on the idler pulley and install the new belt in the V-grooves of all pulleys. Then place the idler pulley back into position.
With any dryer, make absolutely sure that you replace the old belt with a new one made especially for the dryer. Any difference in belts can change the speed of the drum and cause problems with other dryer components.  


thank u................

Sep 12, 2008 | Dryers

2 Answers

I need the procedures on how to change the drive belt on my Hotpoint VTD00G Tumble dryer. I've opened the top & front covers, placed the belt round the drum but I couldn't stretch the belt over the...


Hotpoint tumble dryer not turning? How to replace a Hotpoint tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. 9 rib stretch tumble dryer drive belt Contitech 144001958 9PHE 1860 How...

Apr 06, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Dryers Experts

Tim Whalen

Level 3 Expert

3072 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Samsung Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...