Question about Hoover Nextra HNWL 3136 Front Load Washer / Dryer

Open Question

No instructions for HSW147

Need to know how to put machine on spin only

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Spin. Working short time do not put cloth water out


Sounds like the belt that spins the washing drum is slipping. It my need to be adjusted or replaced, or try washing a smaller load of laundry.

Mar 10, 2016 | GE Washing Machines

2 Answers

Didn't drain. Won't spin.


Hi Kat, let's see if I can help your with this. The washer will not spin when it senses water inside so we'll start first with the drain. When the machine was finished washing, did you hear the drain pump attempting to discharge water? Try selecting the "Spin Only" or "Rinse and Spin" cycle, you should be able to hear whether or not the drain pump is attempting to operate. If you do hear it running, but the water is not draining, it is possible that the drain filter is clogged. If you need instructions on how to clean the filter let me know. Otherwise, we'll move to the next step.

Mar 07, 2015 | Samsung WF203ANW Front Load Washer

1 Answer

Water coming out of the botton during spin cycle


Take the bottom panel off the waher, put water in the machine, and watch to see where it is leaking. If you don't see a leak during the regular cycle, put the machine in drain and spin mode, and watch for leaks there. You should find your leak during one of these cycles so you will know what part you need.

Feb 03, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Repairing the Water Pump


The error code occurs if the pump does not drain within (I believe) 8 minutes. With the tub empty, you have no resistance from anything to obstruct the flow of water. With the tub full, its going to put a bit more strain on the pump to extract water. If the pump motor or impeller are damaged, it may be just enough to cause the pump to run slow enough while the tub is full and cause the error code. If you have already verified all the drain lines to be clear, and have no drainage issues with your household plumbing, the manufacturer recommends you replace the drain pump.

Go to searspartsdirect.com and type in the model number you provided. The pump will be located under the "Pump and Motor" heading as item number 10 (part #280187). It is only sold as a complete unit.

If you need instructions on how to replace the pump, please read this link:

http://www.fixya.com/support/r401845-replacing_drain_pump_whirlpool_duet

I hope this helps answer some of your questions/concerns. Let me know if you need further assistance.

Nov 12, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washing machine broken, kenmore model 110.92274100


REPLACE THE DIRECT DRIVE COUPLING IT IS BETWEEN THE TRANSMISSION AND THE MOTOR PART NUMBER IS 285753A THE TRANSMISSION IS NOT BAD

Apr 22, 2008 | Washing Machines

2 Answers

Hot point WD440 wash/dry :How to put tumble spin off.


i know this may sound stupid but did you follow the instructions on removing the Transit Braket? with tht un removed it will cause the machine to "Dance" around the room

Jan 09, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

LG Washing Machine All-in-One


Some magic happened today!

I got the thing (wd-12331ad) to dry without having to run a wash first!

Also, I seemed to get it to do a spin only run...

The way to get it to dry :
-----------------------------------
(for a set time - I've not managed to get any of the auto-dry settings to work)
from machine being off:
> press the power button.
> press the "Dry" button 'til "Time" lights up
>>> press "Dry" again to get the desired duration
> press the spin button 'til the spin speed shows blank/ the RPM light goes out.
> press "Start/Pause"

It will then dry for the number of minutes specified!

Not perfect, I know but that's serious progress from where I was before; having to re-run a wash cycle to get it to dry anything...

Something to note:
- The machine worryingly sounds like it's starting to fill with water when you start the "Just Dry" program which scared me at first. BUT it stops after a second or so (I think it's just cleaning out the detergent tray so it doesn't bake any leftover powder)


For "spin only" from machine being off:
-------------------------------------------------------
> press the power button.
> press the spin button
>>> if you press "Start/Pause" now you get a 13 minute 1200 spin cycle
>>> press the spin button again and then "Start/Pause", it seems to drain itself for 1 minute
>>> pressing spin repeatedly, cycles through the spin speeds.


Things I don't know:
----------------------------
- I don't know if you can combine spin and heat.
- I don't know whether the auto-dry programs are available
- I don't know what other programs are available from the "Dry"/"Spin" buttons

...So if anyone does any experimenting, please let us know the results, you never know, we might end up with a half way useful set of instructions! I'm starting to think the machine's not half as bad as it seems when following the manual alone.

Hope that helps.
Will

Jan 03, 2008 | LG WD-12126RD Front Load Washer / Dryer

Not finding what you are looking for?
Hoover Nextra HNWL 3136 Front Load Washer / Dryer Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...