Question about Durabrand DWT1304 13" TV

1 Answer

I need ATT uverse remote control code for Onkyo AV rec TXSR304

Using the codes listed in their manual I can only get the receiver to turn off. It won't turn back on or change volume. Any help???

Posted by on

  • springsoak Feb 23, 2009

    I have the same problem with the Onkyo TX-SR502 - the U-Verse remote will turn the receiver on, but not off. I've used a Sony RM-AX4000 remote controller to turn the Onkyo on and off, but that required separate programming of the Sony to recognize on and off signals from the Onkyo remote. The U-Verse remote doesn't allow such programming (or that we've discovered).

  • Anonymous Apr 22, 2009

    Cannot program the remote to turn on Uverse box for Onkyo 605 receiver

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 217 Answers

Hi just a tip! try to program your remote to control both your tv and the cable box both at the same time so when you try to adjust the volume automatically both tv and the cable box will respond. you can actually call uverse for that so that they can assist you on programming your remote to your tv and cable box. hope this would help goodluck!!!

Posted on Jun 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a universal control and i don't have the codes for it to work the tv


    Remote Control Code List

    www.jumboremotecontrol.com/remote_control_code_list.html
    Jumbo Universal Remote Control · 8 Device ... Programing codes for the remote. If you do not see your device listed, you can use the code search feature to program the device into the remote. TV Codes ... JVC, 013,054,055,060,065,067,089.‎Guide to Programming the ... - ‎Download the Manual - ‎8 Device Learning Jumbo ...

    What is the universal control remote code for a JVC television?

    www.ask.com > Technology > Television & Video
    JVC universal codes can also be found on the instruction sheet or manual guide that comes with the remote control or television set. If these universal codes do ...

    JVC Remote Codes

    remote-codes.findthedata.com/l/163/JVC-Remote-Codes
    A list of TV, HDTV, DVD, Receiver, Audio, Amplifier and and VCR remote codes forJVC. images for codes for universal remote control jvc

Jan 03, 2016 | JVC AV-32D305 32" TV

1 Answer

Need att uverse remote codes and Durabrand hb2404d tv codes to set up tv?


0185,0188,0184,0183,0180. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Sep 18, 2014 | Durabrand Televison & Video

1 Answer

Durabrand bh2404d tv codes


2970,2995. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Sep 18, 2014 | Durabrand Televison & Video

1 Answer

How do I put the code in the in the at&t universal control


How to Manually program the AT&T Universal Remote Control to your
TV here are the steps.

Factory Reset the AT&T Remote Control:

* Press the ATT button and the OK button at the same time for 2-3 sec. release them at the same time. The ATT button will blink twice then enter the code 922. The ATT button will blink Thrice. If not repeat the step

* Press the ATT button then check all the function of the remote (Volume, Channel, Menu, Guide)
Note: you will see that the max volume is 25. Dont worry its the volume of the receiver

To Program Your TV:

* Press the TV button and the OK button at the same time for 2-3 sec. release them at the same time. The TV button will blink twice then enter the code. Click Here to see the manufacturers list of codes. After Entering the code TV button will blink thrice. IF not repeat the step

Note: After you program the tv make sure to press the ATT button. then now check all the function of the remote. Follow the instruction and it will work. If you press the power button the TV and ATT Recievier will turn on and off at the same time

May 02, 2011 | JVC AV-32D305 32" TV

1 Answer

I need the code to set up my tv using at&t uverse remote, and the tv has no power button


  • Make sure that you have turned on the tv before you begin programing your Uverse remote control.

  • Hold down the TV button on the Uverse remote. (If you are trying to program a different device, hold down the button that names that device). As you are holding the TV button, press and release the OK button. You know you have done this right when all the mode keys flash twice.
  • Find the 4 digit code for your device
  • At this point, the TV mode button should flash three times. Try to turn the TV off by pushing the power button. If it does not turn off, try a different code. The manufacturer of your TV has many codes.
  • If none of the codes for your device work, try manually searching for a code. Go back and repeat steps 1 and 2. Then enter 922. Hold play as the remote cycles through various codes. When your TV turns off, push enter.
  • ----------------------------------------------
    ---------------------------------------------- Sharp TV codes for at&t remote: 1004, 1009, 1011, 1025, 1064, 1077, 1078, 1081, 1097, 1099, 1153, 1157, 1274, 1298, 1311, 1312, 1362, 1375, 1378

    Jan 24, 2011 | Sharp 27R-S50 27" TV

    1 Answer

    I want to program my ATT Uverse remote


    Try one of these, 000,037,045,066,084,095,128,144,195,232 ..hope this helps..

    Mar 19, 2010 | Televison & Video

    3 Answers

    Uverse remote connection


    This process should be used if the code for the device is not listed in the Manufacturer Code List.
    1. Turn on the device you wish to program.
    2. Point the remote control at the device.
    3. Press and hold the Mode key (TV, DVD or AUX) you want to program. Without releasing the selected Mode key, press and hold the OK key simultaneously
    4. Release both the Mode key and the OK key at the same time.
      All the Mode keys will flash twice indicating programming mode.
    5. Enter code 922 by pressing the number keys on the remote control. The selected Mode key will flash twice indicating correct entry.
      Note: This next step is For AUX Searching only, press and release the PLAY key then press:
      • 1 for VCR
      • 2 for Receiver/Tuner
      • 3 for Amplifier
      • 4 for Home Theater In The Box (HTIB)

      All the Mode keys will flash twice indicating correct entry.
    6. For AUX only, press and hold the PLAY key and wait until the device turns off, then release the PLAY key.
      • The REW key can be utilized to go back through the codes one at a time.
      • The FF key can be utilized to move forward through to codes one at a time.
      • Press the PLAY key to resume auto search of device codes.
    7. To save the code, press the ENTER key on the remote control (bottom right) or press the EXIT key to return to normal operation.
      The selected Mode key will flash three times and return to normal operation.
    8. If no valid code is found, the red light will flash two times and the remote control will return to normal operation.
    9. Turn the device back on using the remote control. If this doesn’t work start over or try Manual
    10. Press the appropriate Mode key on the remote control to work with the selected device. To use the remote control for the AT&T U-verse TV Receiver, press the AT&T Mode key.

    May 24, 2009 | Durabrand DWT1905 TV

    2 Answers

    Emerson tv and at&t uverse


    Try code 1465. On my Emerson LCD TV the only thing it won't do is turn the TV on -- all other functions are controlled by the AT&T U-Verse remote however.

    Jan 21, 2009 | Emerson EWF2704 TV

    Not finding what you are looking for?
    Durabrand DWT1304 13" TV Logo

    1,903 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Durabrand Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    69845 Answers

    matt martin
    matt martin

    Level 3 Expert

    1198 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...