Question about Sanyo PLC-XU74 LCD Projector

Open Question

Plc xu74 DOES NOT COME ON

When the power button is pushed the power light turns green, the fan starts running but, the projection lamp does not light. After 1min or so the fan stops and the red power light flashes.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: Sanyo PLC-XU47 seems to power cycle

Welcome to resolve the problem if you please say what are the solution to me the same problem

Posted on Aug 23, 2008

Ad
Nic61
  • 1073 Answers

SOURCE: no light being projected from unit,

I will guess that your lamp is dead, buy a new lamp.
And if u want to buy a lamp to the lowest price u can get, buy it from www.pricejapan.com


Good luck

Posted on Dec 02, 2008

projdoc
  • 2237 Answers

SOURCE: I have a model PLC-XT11 and when I turn the power

one or more of the fans may not be working right. also, the temp sensor may be shot. if the last time you used it it wasn't shut down properly, it may still be in cool-down mode.

Posted on Nov 09, 2009

  • 26 Answers

SOURCE: projector plc-xt11 has lamp light light red and

I would certainly replace the lamp.

Posted on Mar 08, 2011

  • 4 Answers

SOURCE: Hi, I 've the following problem

There may be a burnt capacitor on the circuit board. If you are savy in electronics and soldering you may be abel to replace yourself if you can determine which one it is and find an exact replacement. I don't believe there are too many on the board. Otherwise take to a repair shop and have them check out the capacitors.

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony Wega power on issues after bulb replacement


Hello,
Check the lamp fan (big fan behind the lamp) you can try cleaning it. Make sure you use an original lamp. Do not buy a cheap lamp from ebay or amazon.

www.aaatvservice.com

Sep 02, 2012 | Sony Grand WEGA KDF55E2000 55" Projection...

1 Answer

Epson 84+ green light blinks no light


1,Check the fans ,whether the fan is running,when you turn on the projector
2,if the fans run, then ,check the lamp or lamp ballast

May 21, 2012 | Epson Corporati PROJECTOR, EPSON,...

1 Answer

Hi I have a Sanyo PLC-XP18 projector and it has recently developed a problem. I was watching a film the other night and the projector just cut out. Now when i try and turn the projector on the the fans...


READY light is green when the projector is ready to be switched on
LAMP is dim when the projector is ON, but goes bright when it reverts to STANDBY.

Check that the lamp cover is fully down and the cover switch is activated

Feb 28, 2011 | Sanyo PLC XP18 Multimedia Projector

1 Answer

I have a model PLC-XT11 and when I turn the power on the temp light and green ready light begin to flash. The red lamp light is on steady. I replace the lamp but no luck.


one or more of the fans may not be working right. also, the temp sensor may be shot. if the last time you used it it wasn't shut down properly, it may still be in cool-down mode.

Nov 06, 2009 | Sanyo PLC-XT11 Multimedia Projector

1 Answer

Panasonic TV


Good Day,christie511;
It sounds like the lamp is in need of replacement. You could call a service company to replace the lamp, but it is so easy to replace the lamp ones self. So, call Panasonic and order the lamp, they will send to your home with instructions.
Three screws and your home free!
Good Luck, Big Irish.

Jul 08, 2008 | Panasonic PT-45LC12 45" Rear Projection...

1 Answer

Sanyo PLC-XU47 seems to power cycle


Welcome to resolve the problem if you please say what are the solution to me the same problem

Jun 07, 2008 | Sanyo PLC XU35 Multimedia Projector

2 Answers

Sanyo XU50 not coming on after lamp replacement


Hi oatesy13

You will have to reset the lamp timer to resolve the problem.

Consult ypour user's manual on how to do this.

Should do the trick , If you do however need any further assistance , please send me a request and I'll respond to it.

May 13, 2008 | Sanyo PLC XU50 Multimedia Projector

6 Answers

Panasonic PT 50LC14 problem


You have to close the lamp door. It has a switch in it much like a clothes dryer door in that when it is open it wont operate.

Feb 23, 2008 | Panasonic PT-50LC14 50" Rear Projection...

Not finding what you are looking for?
Sanyo PLC-XU74 LCD Projector Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2237 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Sanyo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...