- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
U tries those codes that came with ur universal remote owner manual codes for ur tv model already.Those codes don't work for ur tv.Return the universal remote,because any codes people give will not work either.Try website like Remotes.com to buy the tv original remote.
U have the original tv remote?Yes.Look for it on the remote for a button that said SAP pushes to turn it off.If u don't have the tv original remote,might could also be turn it off inside the tv internal Menu functions setup,but probally not because the SAP design in tvs are mostly just a SAP button on the tvs original remote design only.Try website like Remotes.com to buy the tv original remote.
if your remote is a universal then it comes with a paper that has all codes for electronic sets including yours.if the remote is for your tv then you will have to change the batteries.if that does not turn on your tv take back the remote to the store you bought the remote from.good luck.
If you have a camera phone, put it in camera mode. Aim the remote at the camera while looking at the picture on the camera. If you see flickering lights on the image then the remote is OK. This indicates that the TV is at fault. If not, then the remote is at fault. You can try opening it up and cleaning its board and rubber pads with methylated spirit. Also check for bad soldered joints on the board. Wait for it to dry before closing it up again. In any case, the TV should have a button that says TV/AV; is pressing on the button does nothing then certainly the TV has failed. The precise device in the TV associated with the remote control codes is the microcontroller unit (assuming that the infra-red sensor is OK). Sometimes the internal program gets corrupted but a technician worth his salt can reprogram it. Good luck.
If you are using the remote that came with the TV, it is already programmed for it. If you are using a universal remote such as a Logitech, RCA, Sony etc. go to the appropriate web site for support and remote codes for your TV. Good luck..