Question about Zebra Symbol Technologies MC909X-G Series Barcode Scanner

1 Answer

I bought a Storage Locker in a foreclosure sale and in it was a .

SYMBOL MC 9090 -GJOHJEFA6WP I CAN SEE EVERYBODY'S HEAD NODDIN ..."AHHH THE GJOHJEFA6WP... OK ...") I didn't really think much about it and in fact thought it was a Taser until yesterday.. I did a little research and discovered that this is a pretty expensive and sophisticated piece of equipment. Unfortuately not one that just anybody might have a use for ... you guys always give me great info on fixing my Beemer ... Can you tell me who would use something like this?? There are no markings or engravings or anything on it and based upon all of the used car stereo decks and parts etc. in this storage locker I am going to go out on a limb and suggest that it may belong to someone other than the guy who didn't pay his mini storage bill. I have not powered it up yet (dont have the right charger) what can you tell me and assuming that powering this up doesnt tell me who is missing it ...where would I sell something like this and to whom? thx

Posted by on

  • roadloans Jan 04, 2009

    wow ...more people use this ...or should use it than I thought .... will I be able to tell when I power this baby up who the last legitimate owner was? thank you BTW great website answered alot of my questions ...all but one actually ...



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 170 Answers

Go to this site,

Posted on Jan 04, 2009

  • Tom Arsenault
    Tom Arsenault Jan 04, 2009

    I used one at a retail chain and it had the owner info on it, It depends how they set it up. If you contact the manufacturer, they might trace the serial #



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I change sounds on 9090 scanner

Looked though the user manual, and it does not appear that is capability exists. Manual states that the unit will beep after a tag is read. No programming information was presented to change any sound options.

May 14, 2015 | Symbol MC 9090 (sym-mc9090gk0hbega2r)...

1 Answer

How do you link a Symbol MC 9090-G with excel

Jun 23, 2014 | Symbol MC9090-G RFID Handheld Barcode...

1 Answer

What does "Foreclosure" means?

Foreclosure is a situation in which a homeowner is unable to make principal and/or interest payments on his or her mortgage, so the lender, be it a bank or building society, can seize and sell the property as stipulated in the terms of the mortgage contract.

Aug 29, 2013 | Finance

1 Answer

Symbol MC9090 I formatted the Symbol MC9090 installed the drive after I do a setup on the device everything works correctly, after rebooting the symbol mc 9090 its configuration is...

this is because you are cold booting the unit. Everytime you cold boot a 9090 it re-sets all saved settings. You need to warm boot only unless you want the unit reset to default. any problems please mail for support - we supply MC9090's in refurbished condition complerte with like new warranty incase you need any

Oct 21, 2011 | Zebra Symbol Technologies MC909X-G Series...

1 Answer

Symbol 9090-G barcode guns loosing wifi signal.


I have seen this many many times.

Your problem lies with this statement:-

"I can even see every one of the AP's on the gun anywhere in the plant."

In simplest terms - you basically have too much RF signal. If you have 2 AP's on the same channel and they can see each this will cause problems.

You need to tweak your wireless network regarding power settings and channels. It’s a lengthy and laborious task. Start by getting a site plan, noting all the AP locations, channels and power outputs. Then look for ones that clash and amend. There are a few tricks and tips to use, but it’s basically keep adjusting until at any particular location the hand held can not see any AP's that clash. For a very large site it can take a few days to keep tweaking settings.

Hope this helps.
If you need any more help then please do not hesitate to contact us:- or TEL 01202 620955

Jan 12, 2010 | Symbol MC 9090 (sym-mc9090gk0hbega2r)...

1 Answer

What type of bar code symbology can be scanned by MC 9090?

Depends... does it have a laser scanner (beam) or a digital imager (picture)? can provide more help.

Oct 23, 2008 | Symbol MC9090 Barcode Scanner

Not finding what you are looking for?
Zebra Symbol Technologies MC909X-G Series Barcode Scanner Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Computers & Internet Experts


Level 3 Expert

4349 Answers

Lawrence Oravetz

Level 3 Expert

10291 Answers

Brad Brown

Level 3 Expert

17164 Answers

Are you a Zebra Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides