Question about Lexmark C772dn Laser Printer
We replaced the fuser and now when I turn on the printer, the top screen reads "843.00 Service s" and on the next line "an". Not sure how to go about fixing this problem.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This error refers to a thermistor error with your machine (assuming that you meant 923 error and not 123 error). Chances are that you will have to replace your fuser. Part number is: 56P2851.
To replace open the right side door (the one with the blue handle) and the lower door below it. Your fuser is the one with the 2 blue clips. Pull clips down and remove fuser. Replace fuser and push clips into locked (upright) position and that is it.
Hope that helps.
Posted on Mar 19, 2009
I searched the Technical Manual and there is no explanation of the code. The user manual simply says there is a printer failure. They ask that you turn the printer off, wait 10 secs and then restart. Then call 1-800-LEXMARK and they will tell you about the code.
Given that your printer is saying Service Fuser, it is highly likely the fuser is ready for replacement. The fuser is the component that heats to high temperature to fuse the toner to the paper and complete the print cycle.
Posted on Aug 12, 2009
Please follow the appended link to the Lexmark Technical Support website.
Posted on Nov 10, 2009
i have an x543dn has a fuser error of 122.03 service fuser error, i just reset the factory defaults in the config menu and it cleared that error, to get to the config menu press and hold the tick button and the right arrow next to it then power up the machine and continue holding these until the menu is displayed then scroll through menu until you get to factory defaults select this then select reset base, hope this helps. Kev
Posted on Feb 04, 2010
Tips for a great answer:
Nov 28, 2012 | Office Equipment & Supplies
May 05, 2011 | Computers & Internet
Apr 07, 2010 | HP LaserJet 4 plus Printer
Dec 14, 2009 | Dell 1815dn All-In-One Laser Printer
Oct 30, 2009 | HP Office Equipment & Supplies
Oct 22, 2009 | HP Color LaserJet 3500 Printer
May 04, 2009 | Samsung CLP-500 Laser Printer
Mar 27, 2009 | HP Color LaserJet 5550hdn Printer
Jan 12, 2009 | TallyGenicom 8008 Laser Printer
62 people viewed this question
Usually answered in minutes!