Question about Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
HP's answer to your question.
Posted on Nov 09, 2007
This is usually caused by a problem with the chip(s) on the new cartridge.
Check that the chips are clean, and are correctly installed on the cartridge(s) (some can be knocked out of alignment and thus not connect properly).
Also check for any damage to the tiny wires in the printhead where the cartridge sits.. These can also become soiled with fluff, etc... Be VERY careful if you try to clean these as they are very delicate and if broken off you will have a broken printer.
Last thing is of course to check you have the correct cartridges... A common one with the D88 is to have C86 cartridges which are not compatible at all (different' chips!).
Hope that helps.
Posted on Feb 17, 2009
i had same problem, figured out how to solve it. when the epson screen pops up and says the cartridges are not compatiable. go to the how to section and foolow instructions. once the cartridges where primed the printer worked perfectly
Posted on Jun 23, 2009
you need to delete the jobs and print the stuffs...
you need to give the following commands in the command promt which can be accessed from the start menu or by clicking "windows key+r"
net stop "print spooler"
to stop the print spooler
after you have stoped the print spooler
Browse to your windows\system32\spool\PRINTERS\ folder
You should see files there ending in .SPL and .SHD created around the time you tried to print – delete these files.
now try to print the stuffs..
if it clears the mess please give a vote....
Posted on Mar 11, 2010
SOURCE: MF8180C Check paper size error
for god's sake don't ring canon customer service as they are useless and just keep directing me to their **** driver which is causing the problem. i could not convince them that my "printer properties" "paper available" was locked on "letter" and won't allow me to change it. even when i go to the "printer preferences" page and set everything to a4 and press "apply" it still is locked on "letter" in the "printer properties" page. Iv'e probably wasted about 20 hours on this and my office has nearly ground to a halt. If i knew it was going to be this much bother i could have just bought another brand printer.
Posted on Jul 06, 2010
Tips for a great answer:
May 12, 2014 | Canon BubleJet i965 InkJet Printer
Apr 01, 2008 | Epson Stylus Photo R1800 InkJet Printer
Jul 06, 2011 | Epson Stylus Photo R220 InkJet Printer
Feb 28, 2011 | Office Equipment & Supplies
Mar 30, 2010 | Epson Stylus Color 740 InkJet Printer
Nov 21, 2009 | Epson Stylus 880 InkJet Color Printer
Nov 06, 2009 | Epson Stylus Multifunction Inkjet Printer/...
Oct 17, 2009 | Epson Stylus R290 InkJet Printer
Nov 24, 2008 | Epson Stylus Color 460 InkJet Printer
Jul 16, 2008 | Epson Printer
45 people viewed this question
Usually answered in minutes!