Question about Ariston Technologies AWD120 13 lb. Washer / Dryer Combo

Open Question

Ariston Margarita 2000- loud grinding noise when spinning out.

My Ariston Margarita 2000 has run out of warranty and it started making very loud 'clonking' noises when spinning out a few weeks ago. I have just had the machine on and during the spin the noise got even louder and is more like a scrapping/grinding. I turned the machine off and emptied it. When I now turn the drum manually it is grinding against the outer drum and seems to have dropped down. My guess is that the bearings have gone? The machine works well in all other respects, but I am wondering if it worth calling a repair company or just calling it quits and getting a new machine? Any advice/ideas?
Many thanks :-)

Posted by on

1 Suggested Answer

barkencoa
  • 3463 Answers

SOURCE: Ariston Margarita 2000 NOISY spin cycle....

Remove drum drive belt, and spin drum by hand, if there is any resistance,. or it feels rough or noisy, the the main bearigs have probably failed.
If it is o/k then check motor for worn or noisy bearings,
Please rate my solution.
Thanks.

Posted on Jul 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?


How To Fix A Washing Machine Making Noise During The ...

removeandreplace.com/.../washing-machine-making-noise-during-the-sp...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle

removeandreplace.com/.../dishwasher-making-loud-grinding-noise-durin...
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

https://www.youtube.com/all_comments?v=v-arYb20kOk


Dec 03, 2015 | Washing Machines

1 Answer

LG front load washer.Will not spin and makes loud grinding noise


what is your model number is then we can get started then to get your unit fixed all redy

Jan 22, 2013 | Washing Machines

1 Answer

WHIRPOOL WASHER LSQ9564MQ0 Started making loud


judging by the description i would say more likely the coupler
its a three peice part that sits between the mototr and transmission, kinda like a clutch,
anyway it is easily repaired
and available on appliancepartspro.com
type in your model number.....
look for motor coupler

Oct 13, 2009 | Washing Machines

5 Answers

Maytag washer makes loud grinding noise during the spin cycle


if it's making a noise then either your drain pump bearing is going out or your thrust bearing is going out (assuming the noise happens in both spin and wash). Tip the washer backwards so that you can get underneath of it. Take the belt off and spin the pump pulley on the right side. This should spin effortlessly.

The middle pulley is the trustbearing pulley. Spin this--- one direction it should have a little bit of resistance--- the other should have more resistance

Aug 20, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Ariston Margarita 2000 NOISY spin cycle....


Remove drum drive belt, and spin drum by hand, if there is any resistance,. or it feels rough or noisy, the the main bearigs have probably failed.
If it is o/k then check motor for worn or noisy bearings,
Please rate my solution.
Thanks.

Jul 24, 2009 | Ariston Technologies Ariston AWD12 Front...

1 Answer

Washer loud grinding noise spin stop


if its brand new it shouldnt be making a loud grinding noise id get it checked make sure they removed all shipping bolts

May 17, 2009 | Maytag Washing Machines

1 Answer

My Capacity Plus Admiral Washer will spin and agitate, but it makes a loud grinding noise.


Well, Sounds to me like the Bearings are going out, but it could make that noise a good while, before it goes completely out.. Replacement would possably be more cost effective, Kinda hard to beleive !!!!!!

Oct 26, 2008 | Washing Machines

1 Answer

Ariston frontloader - dial spinning around and won't start a cycle


Your bearings are almost certainly gone which would explain the noise not an easy job or cheap . Normally it would consist of a tub change or at best a bearing hub . As for the clicking round of the selector Iwould suggest poss the heater or brush fault. As ofr price you'd have to ask your local repair man. Worst case sinario approx £200 .00

May 30, 2007 | Ariston Technologies AWD120 13 lb. Washer...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

60683 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...