Question about Fisher and Paykel IWL12 Top Load Washer
A fuse blew on my washer and the repair man said the entire board would have to be replaced at a cost of 550 does anyone know how to replace just the fuse
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Need to replace drain hose
there is a kit available to replace just the part from the back of the machine.normally the drain hose comes with the wiring loom big job.not sure what country you are in.kit is available in australia.
Posted on Mar 09, 2008
SOURCE: ecosmart gw11 fisher paykel
Hello and welcome. Couple things to check first-
Tip the machine back and look underneath at the water pump, if it is wet or appears crusty/corroded, you probably have a shorted pump that took the machine control out along with it. Sometimes you can just replace the pump but on those models the board can become a casualty. Also look at the control itself and check for water in the pan area underneath it. Sometimes the mixing chamber thermistor leaks and it will short out the machine control. Whenever you replace the control, a new seal should be put on the thermistor. (easy and cheap insurance)
You might want to start with a fisher paykel gwl11 service manual:
Posted on Dec 18, 2008
You need to pull out the washer, TURN OFF THE WATER, then take the water hoses off the back of the washer. Check the screens inside the water inlets for debris. If that doesn't fix the problem you may need to ask fisher paykel if it's safe to put a chemical like limeaway in those holes to remove hard water deposits that have built up inside the valves.
Posted on Sep 20, 2009
Hi, It is due to a split in the flexible hose from the bowl to the pump. When machine is working, the split opens and closes, but when not operating it can be closed up enough to prevent seeing it leaking. .
Posted on Apr 14, 2010
Tips for a great answer:
Jan 12, 2017 | Microwave Ovens
Sep 16, 2014 | Microwave Ovens
Apr 20, 2012 | Televison & Video
Feb 14, 2011 | Hitachi 42HDS69 42 in. Plasma Television
Jan 15, 2010 | Polk Audio PSW10 Subwoofer
Jun 29, 2009 | Audio Players & Recorders
Feb 02, 2008 | RCA R52WM24 52" HDTV Projection Television
Jun 17, 2014 | Fisher and Paykel IWL12 Top Load Washer
692 people viewed this question
Usually answered in minutes!