Question about Sewing Machines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: THREADING FOR JUKI MO 357
Put new needles in it.
Following the colors, thread the upper looper first, then the lower looper. Next thread the needles. Always thread in this order.
Posted on Jun 27, 2009
Open the font of the serger and the instructions will be printed on the serger or on the door.
Raise the presser foot and set the tensions to zero when threading.
Turn the hand wheel so the upper looper (curved one) is at it's highest point and thread it first, and then the lower looper.
With some sergers you must thread in a certain sequence. This should be indicated in the instructions on the serger.
Set the tensions back to normal ( 4 - 6), lower the presser foot and run a length of stitching to see if the threads are knitted together as they should before you start serging your project.
Posted on Feb 19, 2010
Tips for a great answer:
Aug 03, 2016 | Juki Sewing Machines
Dec 13, 2012 | Juki MO-654DE Mechanical Sewing Machine
Dec 11, 2010 | Juki MO-654DE Mechanical Sewing Machine
Apr 16, 2010 | Juki MO-644D Mechanical Sewing Machine
Feb 19, 2010 | Juki MO-734DE Mechanical Sewing Machine
Jan 07, 2010 | Juki MO-644D Mechanical Sewing Machine
Apr 28, 2009 | Juki Sewing Machines
Jan 11, 2009 | Juki MO-735 Mechanical Sewing Machine
121 people viewed this question
Usually answered in minutes!