Question about OKI MICROLINE 320 Matrix Printer
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like a job was sent to the printer with the wrong driver. There is no way to purge it just load some paper and let it run until it stops. They make sure your emulation matches the driver youa are using. Example Epson 9pin compatiable or OKI ML320 Turbo-IBM drive you want the emulation set to Epson FX. Or if using the OKI ML320 Drive you want the emulation set to ML.
Posted on Jan 16, 2009
In my own experience, Okidata printers have a nasty habit of collecting a lot of paper dust. To start out, I would suggest a really good cleaning, with no paper in the machine, with a can of compressed air. If that does not solve your problem, you might have to replace your feed wheel assembly. Hope this helps!
Posted on Nov 09, 2009
Tips for a great answer:
Sep 17, 2012 | Matrix Okidata Microline 320 Printer
Jul 25, 2011 | Matrix Okidata Microline 320 Printer
Nov 09, 2009 | OKI MICROLINE 320 Turbo Matrix Printer
Mar 04, 2009 | OKI MICROLINE 320 Turbo Matrix Printer
Nov 21, 2008 | Matrix Okidata Microline 320 Printer
Sep 05, 2008 | OKI MICROLINE 320 Turbo Matrix Printer
May 30, 2008 | OKI MICROLINE 320 Turbo Matrix Printer
Apr 24, 2008 | Matrix Okidata Microline 320 Printer
180 people viewed this question
Usually answered in minutes!