Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer
Unplug the power. open the top of the washer to expose the tub. Hold on to the top layer of clothing and rotate the tub by hand in the direction that untangles the clothes.
Posted on Nov 02, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like your agitator is not assembled correctly. It should not have things getting stuck constantly and it should definitely NOT be so easy to remove. Feel around the bottom edge of your agitator. If there is more than a 1/8 - 1/4 inch gap (roughly), it's not being snapped all the way down. Take a towel and fold it to where it is nice and fluffy. Lay it over the top of the cone part of your agitator. Get a hammer and hammer over the towel (as not to damage the agitator top). A rubber mallet could also be used. Tap firmly until you hear a click or until the gap between the agitator and wash tub reach 1/4 -1/8 of an inch. This should solve the problem.
Hope this info was helpful to you. Good Luck!
Posted on Jan 29, 2010
Tips for a great answer:
Mar 26, 2015 | Washing Machines
Mar 23, 2015 | Whirlpool WTW6400SW Cabrio Washer
Dec 09, 2014 | Washing Machines
Sep 17, 2014 | Maytag Washing Machines
Jun 29, 2014 | Frigidaire ATF6000ES Front Load Washer
Sep 07, 2010 | Washing Machines
Aug 16, 2010 | Whirlpool LSQ8543J
252 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: