Question about Hotpoint WD62 Front Load Washer / Dryer

1 Answer

Where do I drain the tumble dry water on a hotpoint wd62 wash/dry

How do I drain the water from the condencer dryer on my wd62 washer dryer?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Remove the top panel by unscrewing the 3 screws at the back of the washer dryer . remove the top and then remove the back metal panel. the screws are down the side and all around the back of the panel. once you have removed the panel check for the black rubber hose that connects to the drum. remove the clip holding the rubber hose by prising it with a small screwdriver. be careful as the water will flow out quite quickly. Check the hose pipe for any blockages and clear as required.

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water pump not working hoover 520l


Cleaning a pump: http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp

Finally the washer must be placed with a tilt- use a spirit level- so that all water will drain to the outlet port and thereby there is no residual water remaining.

Replacing the pump on a Bosch machine, please check this link for tips:

http://www.espares.co.uk/advice/washing-machines/a/7/1373/how-to-replace-the-pump-on-a-washing-machine-.html

Jan 25, 2013 | Hotpoint WD62 Front Load Washer / Dryer

1 Answer

Hi I have a hotpoint WD62 washer dryer. when I'm using the dryer the clothes still come out wet like the steam is not going out of the machine. Any tips on what to check for? Could something be...


I had the problem. I replaced the water inlet valve, and that fixed it. It seems no cold water was coming in on the drying cycle to condense the steam.

Sep 24, 2010 | Hotpoint WD62 Front Load Washer / Dryer

1 Answer

Machine will not completely drain. Always leaves about 2" of water.


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 02, 2010 | Hotpoint WD62 Front Load Washer / Dryer

1 Answer

Not drying


the steam gets condensed back to water and pumped away so sometimes draining problems cause poor drying. is the machine plumbed in according to handbook?
also your dryer filter may be blocked but this is not accesable without the dryer box being stripped down.

Nov 05, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Water got stock in the machine


It sounds like the drain pump has failed.
It is located at the rear right of the m/c, and has 2 hoses connected to it.

Sep 02, 2008 | Hotpoint WD62 Front Load Washer / Dryer

1 Answer

Hotpoint wd62


The most likely culprit here is a the pump, which may either be blocked, or broken.

You should be able to get access to the inside of the pump through a small hatch on the front panel of the machine at floor level. Beware - as you open this, really quite a lot of water is going to come out, so you'll need tomething to catch it, and you may need to shut the cover a few times if your container fills up before the machine is empty.

Once you've got into this space, remove all the loose coins which have accumulated there. If you think you found enough to block the pump and stop it working, put things back together and see if the machine is fixed.

If not, turn off the cold water supply, and run the machine in tumble-dry mode for a few seconds at a time while watching the pump impeller (looks like little fan) in the back of this cavity.

If it doesn't start whizzing round of it's own accord every time, then you need a new pump motor. These are cheap, readily available on the net, and straightforward to fit.

If the pump appears to start and run OK, then check for kinks and blockages in the hose that goes from the drum down to the pump, and in the drain hose that goes from the pump out the back of the machine. Finally, make sure that where the drain hose plugs into the standpipe (of whatever fitting is used in your part of the world to connect to the domestic drains), air can get in freely.

A.

May 18, 2008 | Hotpoint WD62 Front Load Washer / Dryer

1 Answer

Water is being used in the drying cycle


This is normal operation. Water is used by the condensor to liquidfy the steam from drying.

Mar 27, 2008 | Hotpoint WD62 Front Load Washer / Dryer

4 Answers

Hotpoint wd62 leaking from the drawer


Hi, check the electrict valve winding busted hot and cold.

Jan 27, 2008 | Hotpoint WD62 Front Load Washer / Dryer

1 Answer

Hotpoint washer dryer leaking water whilst drying


driers work by running cold water down the back plate of the machine so the hot damp air condence's on to it. It works on the same principle as your bathroom mirror, because its colder than the air around it the moistier in the air condence's on to it. Most machines use a seperate inlet valve from the cold water to do this, they are proned to rub against the back of the drum.Take the top cover off the machine and check the hose's from the cold inlet onto the back of the machine you'll probably find a hole worn in it.

Oct 21, 2007 | Hotpoint Ultima WD72 Front Load...

2 Answers

Hotpoint Aquarius 1200 WD62 (Tumble drying issue).


no the steam from the dryer part comes out of outlet tube the same tube were the water comes out hotpoint washer/dryers use a condensing chamber which allows the steam to cool down a pass through it as water does and through the outlet pipe

Aug 14, 2007 | Hotpoint WD62 Front Load Washer / Dryer

Not finding what you are looking for?
Hotpoint WD62 Front Load Washer / Dryer Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...