Question about TORK Variable Cycling Timer 8601

1 Answer

1104-0 once it shuts off doesnot come back on

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • TORK Master
  • 5,245 Answers

Tork 1104 240Volt timer with #201 clock motor, uses P47 trippers.
Replace P47 trippers.

Order online.
Or Home Depot sell Jasco 15602 tripper identical to P69, located in timer department hanging on sales hook.

Posted on Nov 03, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Makati City zip code & Quezon City zip code

Here it is. Just pick the area that you're looking for.
Makati 1200: Makati Central Post Office 1201: Fort Bonifacio (now part of Taguig) 1202: Fort Bonifacio Naval Station 1203: San Antonio Village 1204: La Paz, Singkamas, and Tejeros 1205: Santa Cruz 1206: Kasilawan 1207: Carmona and Olympia 1208: Valenzuela (includes Rizal, San Miguel, and Santiago Villages) 1209: Bel-Air 1210: Poblacion 1211: Guadalupe Viejo (includes Palm Village) 1212: Guadalupe Nuevo (includes Visayan Village) 1213: Pinagkaisahan - Pitogo 1214: Cembo 1215: West Rembo 1216: East Rembo and Malapad na Bato 1217: Comembo 1218: Pembo 1219: Forbes Park North 1220: Forbes Park South 1221: Dasmariñas Village North 1222: Dasmariñas Village South 1223: San Lorenzo Village 1224: Makati Commercial Center (Ayala Center) 1225: Urdaneta Village 1226: Ayala Avenue-Paseo de Roxas 1227: Salcedo Village 1228: Greenbelt 1229: Legaspi Village 1230: Pio del Pilar 1231: Pasong Tamo and Ecology Village 1232: Magallanes Village 1233: Bangkal 1234: San Isidro 1235: Palanan

Quezon City 1105: Alicia 1102: Amihan 1106: Apolonio Samson 0810: Araneta Center 1135: Araneta Center P.O. Boxes 1106: Baesa 1116: Bagbag 1110: Bagong Bayan 1109: Bagong Buhay 1111: Bagong Lipunan 1105: Bagong Pag-Asa 1119: Bagong Silangan 1106: Bahay Toro 1115: Balingasa 1106: Balintawak 1106: Balumbato 1126: Batasan Hills 1109: Bayanihan 1120: BF Homes 1109: Blue Ridge 1101: Botocan 1141: Broadway Center P.O. Boxes 1105: Bungad 0820: Bureau of Internal Revenue 1110: Camp Aguinaldo 0802: Camp Aguinaldo 0801: Camp Crame 1126: Capitol Hills/Park 1117: Capri 1100: Central 1102: Claro 0880: Commission on Audit 1121: Commonwealth 1111: Crame 1109: Cubao 1128: Culiat 1115: Damar 1104: Damayan 1112: Damayan Lagi 1123: Damong Maliit 1105: Del Monte 1104: Diliman 1109: Dioquino Zobel 1113: Don Manuel 1113: Doña Aurora 1125: Doña Faustina Subdivision 1113: Doña Imelda 1113: Doña Josefa 1102: Duyan-Duyan 1102: E. Rodriguez 1109: Escopa 1118: Fairview 1121: Fairview [North] 1122: Fairview [South] 1114: Gintong Silahis 1117: Gulod 1127: Holy Spirit 1112: Horseshoe 1111: Immaculate Concepcion 1124: Kaligayahan 1112: Kalusugan 1102: Kamias 1103: Kamuning 1105: Katipunan 1111: Kaunlaran 1112: Kristong Hari 1101: Krus na Ligas 1114: La Loma 1103: Laging Handa 1110: Libis 1114: Lourdes 1108: Loyola Heights 1114: Maharlika 1101: Malaya 1109: Mangga 1115: Manresa 1112: Mariana 1104: Mariblo 1109: Marilag 1109: Masagana 1115: Masambong 1114: Matalahib 1119: Matandang Balara 1109: Milagrosa 1138: Murphy District P.O. Boxes 1125: Nagkaisang Nayon 0830: National Irrigation Administration 1104: Nayon Kaunlaran 1107: New Era 1147: Novaliches P.O. Boxes 1123: Novaliches Proper 1103: Obrero 1101: Old Capitol Site 1114: Paang Bundok 1115: Pag-Ibig sa Nayon 1103: Paligsahan 1105: Paltok 1108: Pansol 1104: Paraiso 1118: Pasong Putik 1107: Pasong Tamo 1119: Payatas 1104: Phil-Am 0850: Philippine Heart Center 1111: Pinagkaisahan 1100: Piñahan 1109: Project 4 1100: Project 6 1105: Project 7 1106: Project 8 0860: Quezon City Hall 1102: Quirino District (Project 2 & 3) 1105: R. Magsaysay 1103: Roxas District 1103: Sacred Heart 1114: Salvacion 1117: San Agustin 1105: San Antonio, Quezon City 1116: San Bartolome 1113: San Isidro 1114: San Isidro Labrador 1115: San Jose 1109: San Roque 1101: San Vicente 1116: Sangandaan (GSIS Village) 1104: Santa Cruz 1117: Santa Lucia 1117: Santa Monica 1114: Santa Teresita 1105: Santo Cristo 1113: Santo Niño 1113: Santol 1116: Sauyo 1114: Sienna 1101: Sikatuna Village 1102: Silangan 0800: Social Security System 1109: Socorro 1103: South Triangle 1110: St. Ignatius 1111: St. Martin de Porres 1114: St. Peter 1109: Tagumpay 1110: Talampas 1104: Talayan 1116: Talipapa 1116: Tandang Sora 1113: Tatalon 1101: Teachers Village 1110: Ugong Norte 1106: Unang Sigaw 1101: University of the Philippines Post Office 1144: University of the Philippines P.O. Boxes 1101: University of the Philippines Village 0840: V. Luna Hospital 1112: Valencia 1128: Vasra 0870: Veterans Hospital 1105: Veterans Village 1109: Villa Maria Clara 1120: Violago Homes 1104: West Triangle 1110: White Plains
Hope this helps.

Sep 16, 2011 | Computers & Internet

1 Answer

I have model 1104 sensaphone and lost manual. I want to know how to change dial out numbers

To change the phone numbers in the Sensaphone 1104 press [SET] [phone number] <1-4> then enter the telephone number you want the unit to dial, and press [enter]
*Remember to program the telephone number JUST how you need to dial it from that location. If you do not require a 1 or area code do not program it in, as this can cause the dial out to fail.*

Here is a link to the manual if you need one. Also, since this model was discontinued, the direct replacement for this unit would be the Sensaphone 400.

Sensaphone 1104 Manual:

Sensaphone 400:

Feb 06, 2011 | Cell Phones

1 Answer

Tork 1104 is wired 120 vac. hot wire connected to L with jumper wire to wire for outdoor lights connected to X. nuetral wires are wire nutted together. not connected to timer. clock not working....

The clock isn't working because the Tork 1104 clock motor requires 240 volts. Jumping the 120 volts over from terminal L to terminal 1 doesn't make it 240 volts. You need another 120 volt leg (180 degrees out of phase) to do that. The Tork 1103 timer is what you need, or change the 1104 clock motor to a 120 volt.

Dec 16, 2010 | Hardware & Accessories

2 Answers

Msi k9mm-v driver vga

Dec 06, 2010 | Computers & Internet

2 Answers

On my 97 the abs ring on the cv axle is almost gone!! made a turn today and the wheel almost locked up..any help??

I would have the cv axle changed along with any integral parts such as the abs ring.

  1. Disconnect the negative battery cable.
  2. Remove the wheel cover/hub cover from the wheel and tire assembly, then loosen the lug nuts. Fig. 1: After removing the wheel/hub cover, loosen the lug nuts 86877115.gif

  3. Raise and safely support the vehicle, then remove the wheel and tire assembly. Insert a steel rod in the rotor to prevent it from turning, then remove the hub nut and washer. Discard the old hub nut. Fig. 2: Before removing the hub nut and washer, insert a steel rod in the rotor to prevent it from turning 86877116.gif
    Fig. 3: Remove the hub nut and washer, then discard the nut, and replace with a new one during installation 86877117.gif

  4. Remove the nut from the ball joint to steering knuckle attaching bolts.
  5. Drive the bolt out of the steering knuckle using a punch and hammer. Discard this bolt and nut after removal. Fig. 4: Drive the bolt out of the front wheel knuckle using a punch and hammer, then discard the nut and bolt and replace with new ones during installation 86877118.gif

  6. If equipped with anti-lock brakes, remove the anti-lock brake sensor and position it aside. If equipped with air suspension, remove the height sensor bracket retaining bolt and wire sensor bracket to inner fender. Position the sensor link aside. Fig. 5: If so equipped, remove the anti-lock brake sensor and position it aside 86877119.gif

  7. Separate the ball joint from the steering knuckle using a suitable prybar. Position the end of the prybar outside of the bushing pocket to avoid damage to the bushing. Use care to prevent damage to the ball joint boot. Remove the stabilizer bar link at the stabilizer bar. Fig. 6: When separating the ball joint from the steering knuckle, be careful not to damage to ball joint boot 86877120.gif
    1. Slide the link shaft out of the transaxle. Support the end of the shaft by suspending it from a convenient underbody component with a piece of wire. Do not allow the shaft to hang unsupported, damage to the outboard CV-joint may occur.
    2. Separate the outboard CV-joint from the hub using front hub remover tool T81P-1104-C or equivalent and metric adapter tools T83P-1104-BH, T86P-1104-Al and T81P-1104-A or equivalent. NOTE: Never use a hammer to separate the outboard CV-joint stub shaft from the hub. Damage to the CV-joint threads and internal components may result. The halfshaft assembly is removed as a complete unit.
    3. Install the CV-joint puller tool T86P-3514-A1 or equivalent, between CV-joint and transaxle case. Turn the steering hub and/or wire strut assembly aside.
    4. Screw extension tool T86P-3514-A2 or equivalent, into the CV-joint puller and hand tighten. Screw an impact slide hammer onto the extension and remove the CV-joint.
    5. Support the end of the shaft by suspending it from a convenient underbody component with a piece of wire. Do not allow the shaft to hang unsupported, damage to the outboard CV-joint may occur.
    6. Separate the outboard CV-joint from the hub using front hub remover tool T81P-1104-C or equivalent and metric adapter tools T83P-1104-BH, T86P-1104-Al and T81P-1104-A or equivalent.
    7. Remove the halfshaft assembly from the vehicle. Fig. 7: These tools are necessary for halfshaft removal 86877121.gif
      Fig. 8: Installing the specified tools to remove the halfshaft assembly from the vehicle 86877122.gif
      Fig. 9: Support the end of the shaft by suspending it from a convenient underbody component with a piece of wire. Do not allow the shaft to hang unsupported, since damage to the outboard CV-joint may occur 86877123.gif
      Fig. 10: Separate the outboard CV-joint from the hub using front hub remover tool T81P-1104-C or equivalent, and metric adapter tools T83P-1104-BH, T86P-1104-Al and T81P-1104-A or equivalent, then remove the halfshaft assembly from the vehicle 86877124.gif
      Fig. 11: Exploded view of the halfshaft assemblies and related components - automatic transaxle 86877125.gif
prev.gif next.gif

Oct 26, 2010 | 1997 Lincoln Continental

1 Answer

Why does startup repair keep popping up on my laptop when i turn it on my sony laptop

This is the system error and it comes when the user doesnot shut the comp in proper way.//
it can also come if due to some reason the comp is shut automatically//
to get rid of it try last known good configuration.
shut down the comp// restart and immed start hitting f 8 cont to get the advance boot menu//
select LKGC and once that is done hopefully your computer will boot perfectly//

May 29, 2010 | Sony VAIO VGN-CS110E/W NoteBook

1 Answer

Acer 3100 laptop lights on fan on slow but no screen

Remove the battery and disconnect the Ac adapter from the laptop. Press the power button and hold it for 10 seconds.Reconnect only the Ac adapter and power on the laptop.

Post back if the above solution doesnot work , it could be bad video card driver.

Thanks for using fixya

Aug 12, 2009 | Acer Aspire 3100-1405 Notebook

Not finding what you are looking for?
TORK  Variable Cycling Timer 8601 Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top TORK Hardware & Accessories Experts

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

19654 Answers


Level 3 Expert

504 Answers

Are you a TORK Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides