Question about Computers & Internet

2 Answers

Wife signal too strong..

Last year I upgraded from Girlfriend 7.0 to Wife 1.0. I soon noticedthat the new program began unexpected child processing that took up alot of space and valuable resources.
In addition, Wife 1.0 installed itself into all other programs and now monitors all other system activity. Applications such as Poker Night 10.3 , Football 5.0 , and Racing 3.6.
I can’t seem to keep Wife 1.0 in the background while attempting torun my favorite applications. I’m thinking about going back toGirlfriend 7.0 , but the uninstall doesn’t work on Wife 1.0 . Pleasehelp!

Posted by on

  • chris grams
    chris grams Jan 04, 2009

    That fixed it! Thanks!


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have heard of this problem before,but it wasnt until it happened to a friend of mine that the solution was found! You need to purchase the program Lawyer 3.0.Its a powerful program containing Divorce 9.5 the only appliction known to completely remove wife 1.0. Lawer 3.0 is also completely compatible with the other two programs you need, which are Child support 8.1 and  Alimony 2.All of these programs can and will do everything you expect them to but I have to warn you that the purchas and monthly up keep of these programs is very,very expensive,So you might want to weigh your options before diving into this.Ask yourself these questions first,"Is wife 1.0 really that bad?" and " Does itreally interfear that much with my system activity?" If you answered "No" to either of these questions then I would seriousily advise you to consider the alternative to this fix which is Marriage Counselor 4.0 A much cheeper way to go! I hope this information will be helpful to you. Good luck  


Posted on Jan 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 42 Answers

Hello Ziraffa,

This is a very common problem and I am sure you have noticed too that Wife 1.0 provides no option as to the installation of undesired Plug-Ins such as MotherInLaw 55.8 and BrotherInLaw Beta release.

Many people upgrade from Girlfriend 7.0 to Wife 1.0, thinking that it is just a Utilities and Entertainment program. Thats where YOU went wrong, as Wife 1.0 is an OPERATING SYSTEM and is designed by its Creator to run EVERYTHING!!!

It is also impossible to delete Wife 1.0 and to return to Girlfriend 7.0. It is impossible to uninstall, or purge the program files from the system once Installed!

You cannot go back to Girlfriend 7.0 because Wife 1.0 is designed to not allow this.
Look in your Wife 1.0 manual under "Warnings-Alimony-Child Support".

I recommend that you keep Wife1.0 and work on improving the situation.

In my oppinion I suggest you install the background application "Yes Dear" to alleviate software

The best course of action is to enter the following DOS command:- C:\APOLOGIZE because ultimately
you will have to give the APOLOGIZE command before the system will return to normal anyway.
Wife 1.0 is a great program, but it tends to be very high maintenance. Wife 1.0 comes with several support programs, such as Clean and Sweep 3.0, Cook It 1.5 and Do Bills 4.2.

However, be very careful how you use these programs. Improper use will cause the system to launch the program Nag Nag 9.5. Once this happens, the only way to improve the performance of Wife 1.0 is to purchase additional software. I recommend Flowers 2.1 and Diamonds 5.0!

I hope this helps you, and please rate it so I know that you understand.

Good luck! (You will need it!!)

Posted on Jan 04, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Upgrading Toshiba Satellite A105 to Windows 7

Before you do anything I strongly recommend you upgrade the RAM to 2GB. Your system can only support 2 GB of DDR2 PC2-5300 with a maximum of 1 GB per slot. Windows 7 will work OK with 1 GB, but more is better! One memory stick can be found under the keyboard, which can be accessed by popping the top plastic strip right in front of the monitor, unscrewing the two retaining screws, and lifting the protective film over the memory. The second module is on the bottom of the system . You unscrew the memory compartment, which is located directly below the battery and to the right of the Toshiba model sticker.

The rest of this Review is pretty much for any system. I will be providing more How-Tos specific to certain laptops soon.

Next, I suggest you clean install Windows 7 on your system. Even when clean installing, Windows 7 can preserve your entire original installation in a Windows. old file in the root of C:. This means you will be able to retrieve all of your documents and everything else, even run old programs from this folder temporarily. However, I would suggest migrating your files from windows.old to their corresponding folder in Windows 7.

Windows 7 has a massive preloaded driver database, so most of your hardware should be installed immediately. If there are drivers missing, and even if everything is covered, you should run Windows Update immediately to ensure you have the most current version of Windows 7 and all hardware drivers.

Finally, you need to the "Toshiba Software Installer for Windows 7" . This will install the "Hot key functions" and additional drivers for the notebook that is not detected by Windows 7.

Go to the link below:

Toshiba Software Installer for Windows 7

Enjoy Windows 7!

on Jan 29, 2010 | Toshiba Satellite A105 Notebook

1 Answer

Asus f3j bios mod for upgraded ram

Not sure what you are asking about. Asus site says the motherboard will take DDR2 533/667MHz SDRAM, 2x SO-DIMM socket expandable to 2GB
Which means DDR2 533mhz 1 gig per slot total 2gig
or DDR2 667mhz 1 gig per slot total 2 gig

To enter BIOs press F2 at boot up, but no setting should need to be changed.

They do not have a BIOs update for increasing the memory limits.
BIOs upgrades from first to current are.
BIOS 304
Update new CPU Microcode
System plays wave file and causes garbage sound.
BIOS 305
To fix system cannot do battery pre-charge process when an unknown/failure battery insert.
Support Intel Extend ID CPU:Merom Celeron 530 CPU.
BIOS 306
To fix system cannot do battery pre-charge process when an unknown/failure battery insert.
BIOS 307
Fix System hang at ASUS LOGO on SATA HDD with factory recovery image
Last upgrade date is 2008 7 14

Mar 14, 2014 | ASUS F3Jc Notebook

3 Answers

It says "The process android.process.acore

Wth? I have the same problem. Just out of the warrany period. Can't get around the force close button to hit the settings button. Will not hard reset with the usb hold down button pull usb command. Nothing but force close after installing slide me. No other option but to push the force close button. Nice waste of 200 bucks. I think lawsuits are in order. This company has placed a fraudulent link to "firmware updates, coming soon" on its website to get nextbook buyers to hang in there just long enough to exceed their warranty period. This is false advertising. My nextbook is JUNK. And I've done nothing but download their recommended software from their website. No upgrade though... instead they manufactured a new tablet with an up to date operating system. Where's our upgrade? Class action lawsuit anyone?

Jun 06, 2011 | Computers & Internet

1 Answer


Sometimes major changes delete other things!!!!
Look on you hard disk in add and remove programs, if you dont see it, its gone and you will have to reinstall it... Sorry...
Happy new year!

Jan 04, 2010 | Acer Aspire 7520-5185 Laptop

1 Answer

Displays sys error session manager initialization terminated unexpectedly status of 0xc00026c (0x00000000 0x00000000)

smss.exe is the process that manages sessions in Windows Computer. This is the session manager subsystem, which is responsible for starting the user session. This process is initiated by the main system thread and is responsible for various activities, including launching the Winlogon and Win32 (Csrss.exe) processes, and setting system variables. After it has launched these processes, it waits for either Winlogon or Csrss to end. If this happens normally, the system shuts down; if it happens unexpectedly, smss.exe causes the system to stop responding (hang).

In this case, I suggest that you start the "smss.exe" process manually from the Task Manager. You can press the "Ctrl+Shift+Esc" together to display the Task Manger window. Then, click on the Applications tab then the "new task" tab located at the bottom. In the New task dialog box, please type "smss.exe" and click OK.

However, you can also perform System Restore to restore the Windows System files to the time when it operated normally. Performing System restore will not delete any saved data however, all the installed programs after the selected restored point will be unistalled and require to reinstall them.

Jul 11, 2009 | Computers & Internet

1 Answer

Wireless connection to router

You will need a range extender to get strong signal

Aug 26, 2008 | Acer Aspire 3610 Notebook

1 Answer

Damaged Bios

In older machines you just replaced the BIOS chip with one that had been programmed outside of the motherboard. Newer computers don't have that luxury as the BIOS is often burnt into a chip that is soldered to the motherboard. Too expensive to have chips mounted by humans at the factory. Also, increases the depth of the motherboard and in today's designs, creates additional problems. Your tech at the service center is correct. The warning should be a WARNING!!!

Jun 17, 2008 | Computers & Internet

2 Answers

Computer problem

virus protectors are like things in ancient world now days its spyware virus scanners lost there credibility to spyware programs cause spyware is quicker faster and they hide better but not from proper proggies
you need a strong firewall program like zone alarm
and spyware programs like spywareblaster and spy bot these programs are free bee's not shareware full functioning programs
you need to upgrade service pack 2 and internet explorer 7 with built in pop up blocker

wacovia pop ups are a phishing program looking to destroy comps these are spy ware and trojans hiding ready to strike once you get the recommended programs up these spy's should disapear

May 08, 2008 | Acer Aspire 5100 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

100288 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides