Question about Dymo Office Equipment & Supplies

Open Question

Preprinted Labels for Golf Handicap Index Network (GHIN) are on spool which fits exactly into Dymo LabelWriter 320 Thermal Printer; however, lines print too far right on preprinted lables (about 1/8 inch). How does one adjust print, since labels cannot be moved to the right?

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
yooperbud
  • 8637 Answers

SOURCE: Dymo 320 thermal label printer:

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Posted on Jan 25, 2009

Ad
  • 254 Answers

SOURCE: how to print preprinted labels...

Have to callibrate the printer.
With printer ready
press Pause once.
press Pause for 3 seconds until
- The labels are fed (let 3 labels go through)
the Choose detection preprinted lmabels in the driver
Or
a message Transmissive is displayed.
Release he pause button.
Press on the pause button to feed 2 or 3 labels
Then select transmissive preprinted in the driver.
Else
Restart to change from transmissive to reflective if you use black mark.
Press pause to feed 2 labels
Choose relective preprinted or reflective manual in the driver

Posted on Aug 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is my GHIN number?


GHIN is the acronym for Golf Handicap and Information Network. It's a service established by the United States Golf Association to provide handicaps for players at certain golf clubs and associations. A golf handicap is a numerical measurement of a golfer's ability. The lower the number, the better.

Nov 16, 2014 | Cars & Trucks

1 Answer

Dymo LabelWriter 450 Twin Turbo - Until recently worked fine from both sides. Suddenly, no longer printing from left - prints half a label, then stops, then error message says Out of Paper, the blue light...


See if it still happens using a fresh label roll. From the Dymo 450 User Guide the common causes of poor print quality issues.

Poor print quality is most frequently caused by one of the following:
• An old roll of labels
• Labels made by a manufacturer other than DYMO
• Labels where the thermal coating has been compromised
• A dirty print head
First, make sure you are using DYMO-branded labels. Do not use third-party labels because the thermal coating on other labels has a different sensitivity than DYMO-branded labels. Also, the perforated holes between the labels made by other manufacturers are frequently not detectable by LabelWriter printers.
If the print quality becomes faint, small dots of white appear scattered through the printed characters, or light and dark patches of printing appear, you are probably using a faulty roll of labels. Try using a different roll from a fresh box. If the second roll prints correctly, the problem is with the first roll of labels.
Another possibility is that the LabelWriter print head needs cleaning. Every LabelWriter printer comes with a cleaning card. See "Caring for Your Printer" on page 17 for information about the
LabelWriter cleaning card.

Sep 13, 2013 | Dymo LabelWriter 400 Turbo Thermal Printer

1 Answer

Light is blinking and won't print labelsbet


If you like my solution, please give me 4-thumbs up rating.


Why is the light on the front of my Model 330 LabelWriter blinking?

There are 5 possible reasons for this:
  1. The labels are not left-justified
    • Verify that the labels are left justified and loaded properly in the LabelWriter. Click here for more information on loading the labels in the LabelWriter.
  2. There is paper dust or a piece of a label blocking the sensor
    • Take the roll of labels out of the printer and use the provided cleaning card to clean your unit. Click here for more information on using a DYMO Cleaning Card. You can also use compressed air by blowing some air along the left side of the paper path inside the printer.
  3. The labels you are using do not have the index marks properly cut out between each label
    • If the index holes are not cut cleanly, you may run into this problem. Try a different roll of labels.
  4. You are not using DYMO labels
    • If you are not using DYMO labels (or are unsure whether or not you are), please obtain a roll of DYMO labels and try to print again. DYMO labels are made specifically for our printers.
  5. The photo sensor that reads the index mark has failed
    • If this is the case, the unit will need to come in for repair. Select the Ask A Question tab at the top of this page to contact our Technical Support team. Please include the following information so that we can set up a Return Material Authorization (RMA) for you:
      • Full Name
      • Full Shipping Address (No PO boxes)
      • Phone Number
      • Date of Purchase
      • Model Number (a 5-digit number found on the bottom of your LabelWriter)
      • The 11-digit number under the barcode on the same label
      • Serial Number (located on the bottom of the printer, starting with "S/N" -- it also contains a dash after the first five numbers)
      • If your unit is out of warranty (beyond 2 years from the original date of purchase), please provide us with a method of payment (including expiration date, if using a credit card). The cost to repair your unit is either $75, which includes UPS Ground return shipping, or $90 for UPS Next Day Air return shipping. Please let us know which return method you desire.

Aug 04, 2011 | Dymo LabelWriter 330 Thermal Printer

1 Answer

My Dymo Labelwriter 450 turbo feeds out 4 labels each time I print one. The print setting is on one label. The first one prints and the next three are blank. If I try to use the reverse button the printer...


Multiple label feeding usually occurs because the sides of the spool holding the roll are not squeezed tightly together. Make sure there's no gap between the labels and the sides of the spool. If this doesn't help. take out the labels and blow a blast of air into the feed slot. There is a sensor inside the slot on the left that detects the hole in the labels, and maybe it is blocked.

Jan 26, 2011 | Dymo LabelWriter 400 Thermal Printer

1 Answer

My Dymo Labelwriter 400 turbo will not print. The print error comes up and does not tell me what is wrong. When I take the labels out and reinsert them the labelwriter will not load I have to unplug the...


In most cases, problems are solved by checking whether the spools are firmly pressed against the label roll: This machine can be very picky. Many questions can be answered at the following site. http://global.dymo.com/enNZ/HowTo/LabelWriter_400.html

Chris Thrash
B52Computers

Jan 19, 2011 | Dymo LabelWriter 400 Turbo Thermal Printer

1 Answer

There doesn't seem to be any ink - labels come thru' blank, all connections are good


These Dymo LabelWriters are thermal printers which uses heat to print the labels, not ink. Be sure you are using labels compatible with your Dymo printer.

Dec 29, 2009 | Dymo LabelWriter 400 Thermal Printer

1 Answer

Driver for dymo 320


You can get the Vista and Windows 7 drivers here: Dymo Drivers

Before you go to all the effort of downloading check your model number against the compatibility list.

If it's not listed see the solution here: LabelWriter 450 News

Specifically read the comments at the bottom...

Dec 16, 2009 | Dymo LabelWriter 320 Thermal Printer

1 Answer

Dymo 320 thermal label printer: The printer suddenly stopped printing ... the labels spool through and the printer makes it's normal noise as if printing ... but no printing is done ... possibly the...


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 06, 2009 | Esselte DYMO LabelWriter 320 Thermal...

3 Answers

Dymo Labelwriter - Compatible Labels


Nina try www.labelvalue.com for Dymo labels and Dymo compatible labels. The shipping is also free.

Feb 15, 2008 | Dymo LabelWriter 400 Turbo Thermal Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dymo Office Equipment & Supplies Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Ed Mac

Level 3 Expert

731 Answers

Jax Planet
Jax Planet

Level 2 Expert

922 Answers

Are you a Dymo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...