Question about Hotpoint Washing Machines

Open Question

Start/cancel button on hotpoint WT740 doesn't always work

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

BADBOYJAY
  • 264 Answers

SOURCE: WT740 Hotpoint Aquarius Plus Washing Machine

it sounds like the Bord on the front panel has been pushed back ..unplug the machine take lid off and nicely push the Bord in you should see by clicking the on off button if you have done it hope this has helped if not then it sound like a Bord problem with Bord is up to you how far you want to take the machine apart ok you can get back to me after you have tried to push the Bord back ok

Posted on Oct 22, 2012

  • 57 Answers

SOURCE: the start button on my hotpoint wt740 washing

Hotpoint had a problem with a control panel design where if the start button is pushed too hard, it snaps off the panel. This is most likely cause but it might be a faulty door lock.

Posted on Dec 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Saying test on my wt965 washer


There are few methods, depends on the age of the appliance.


Press the Start/Cancel button until all the console LED's illuminate.
Press both Start/Cancel and On/Off buttons together until
d OFF appears.
The default screen returns and you can select a new programme.

Simply press the Cancel button and the appliance returns to default.

Press On/Off and Start/Cancel toghether with top left option button until d OF appears.

or


Switch off at mains, press and hold On/Off & Start/Cancel buttons, switch mains back on, keep holding down buttons until Doff appears in display.

Nov 02, 2012 | Hotpoint Washing Machines

1 Answer

WT740 Hotpoint Aquarius Plus Washing Machine


it sounds like the Bord on the front panel has been pushed back ..unplug the machine take lid off and nicely push the Bord in you should see by clicking the on off button if you have done it hope this has helped if not then it sound like a Bord problem with Bord is up to you how far you want to take the machine apart ok you can get back to me after you have tried to push the Bord back ok

Oct 22, 2012 | Washing Machines

1 Answer

WF865 hotpoint washing mac hine keeps going into test


Hi from retired Englishman in SW France,

Here are the instructions to clear the 'test' depending on the date code:-

Date code 39 March 2005
Press start/cancel until ALL LEDS are lit
Press both start/cancel AND on/off together until 'dOFF' is displayed

Date code 39 March 2005 to date code 42 June 2005
Press the cancel button and the machine should return to norma

Date code 43 July 2005 onwards
Press both start/cancel AND on/off TOGETHER with top left option button until 'dOFF' is displayed.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Oct 23, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Always in test mode i have a wf860


Hi from retired Englishman in SW France,

Here are the instructions to clear the 'test' depending on the date code:-

Date code 39 March 2005
Press start/cancel until ALL LEDS are lit
Press both start/cancel AND on/off together until 'dOFF' is displayed

Date code 39 March 2005 to date code 42 June 2005
Press the cancel button and the machine should return to norma
l
Date code 43 July 2005 onwards
Press both start/cancel AND on/off TOGETHER with top left option button until 'dOFF' is displayed.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Oct 21, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Aquarius wf620p. indicator shows test. phonecall to service dept says it is stuck in demo mode and hold down buttons until it clears - it doesn't work


Hi from retired Englishman in SW France,
(following pre-typed- No, I cannot type that fast!)

Here are the instructions to clear the 'test' depending on the date code:-

Date code 39 March 2005
Press start/cancel until ALL LEDS are lit
Press both start/cancel AND on/off together until 'dOFF' is displayed

Date code 39 March 2005 to date code 42 June 2005
Press the cancel button and the machine should return to norma
l
Date code 43 July 2005 onwards
Press both start/cancel AND on/off TOGETHER with top left option button until 'dOFF' is displayed.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Sep 19, 2011 | Hotpoint Washing Machines

1 Answer

Front loader hotpoint wf840 running 'test' cant remember how to reboot. last time i had to do this i had to hold down one of the buttons for a few seconds and wait till a specific word came up on...


Hi from retired Englishman in SW France,

Here are the instructions to (just) clear the 'test' depending on the date code:-

Date code 39 March 2005
Press start/cancel until ALL LEDS are lit
Press both start/cancel AND on/off together until 'dOFF' is displayed

Date code 39 March 2005 to date code 42 June 2005
Press the cancel button and the machine should return to norma
l
Date code 43 July 2005 onwards
Press both start/cancel AND on/off TOGETHER with top left option button until 'dOFF' is displayed.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Sep 10, 2011 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

Hotpoint wt740. When starting a wash cycle the machine tries to fill but shows the H20 code and the water goes straight out of the drain tube (it appears to have normal pressure and flow rate).


Hi from retired Englishman in SW France,
Indesit (Hotpoint, Ariston) Error code H20
(Quote)'If the machine is not in the demo mode and this error is displayed it means there is no water being supplied to the machine.
To cancel press and hold start/cancel then press again to cancel the drain and the machine should now be reset and display 'ON' as usual.'(unquote)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Jun 04, 2011 | Washing Machines

1 Answer

The start button on my hotpoint wt740 washing machine wont click on.


Hotpoint had a problem with a control panel design where if the start button is pushed too hard, it snaps off the panel. This is most likely cause but it might be a faulty door lock.

Dec 09, 2009 | Hotpoint Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...