Question about Washing Machines

1 Answer

Hotpoint aquarius wf101p - all lights flashing

When you turn on all lights flash and you can't start a wash. Checked filter and clean. Checked all inlets and they are fine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your controller/main board has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint 6kg washing machine Aquarius wash light indicated door lock indicator flashing machine won't fill any ideas thanks Brendan checked filter ok


Many or even most washing machines will not run if the door lock switch is not working. Open and close the door a few times to see if the light stops flashing. You could press on the door where the latch is and see if that makes a difference.

Jun 04, 2015 | Hotpoint Washing Machines

3 Answers

Aquarius hotpoint wf541 wont pump the water out at the end of the cycle


You need to clean the filter.
Remove lower rear cover of washer.
Locate and remove large black hose fastened to bottom of drum.
Remove and clean the filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well
Hope this helps with your problem

Dec 28, 2009 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Control panel lights ALL flashing on hotpoint aquarius washing ma


my lights are all flashing on my control panel, its takes water in then pumps out straighaway doesnt wash or spin i have changed the brushes so i know it isnt that please help it only about 3 years old

Dec 06, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

3 Answers

Error code F-05 for hotpoint aquarious washing machine


your pump/filter/outlet hose is blocked. clean it all out with the power off.

Oct 30, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Water will not drain - rinse hold/mini load lights flashing


You might have to take the pump off and clean out the debris in the line theres probably lint, change and other things in the line. Take the lines off and run a piece of wire through the lines to make sure their clear.

May 05, 2009 | Hotpoint Aquarius WD640 Front Load...

2 Answers

My hotpoint aquarius wd440 washing machine - flashing lights ?


I have a fairly new Hotpoint Aquarius machine (out of guarantee).
When it is switched on, all of the red lights flash and it will not operate.
Can you help please ??

Oct 18, 2008 | Hotpoint Aquarius WD63 Front Load...

5 Answers

My hotpoint aquarius wd440 has flashing lights


First of all try cleaning the filter inside the back as described by others if this does not work there is a filter in the top. how you clean this is quite easy. all you do is remove the top of the machine by undoing the 2 screws at the back then pull top top backwards when you have removed the top you well see a large metal casing on the left if you are looking from the the back of the machine the filter is in there to remove the casing you pull the small pipe off then undo 5 star headed screws then gently pull the casing off noteing that there is a large pipe at the front when you have remover the casing you will see the filter (the small pipe you removed at the start fits on this filter) clean the filter then put it all back together.

Jun 14, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

WF540 - Won't work and rinse hold and wash enhance lights flash?


Hi ya, just a quick suggestion, have you cleaned the filter on the front of your machine?? My machine did this and it was only when i cleaned the fluff and the 5 pence pieces from this filter it stopped, Hope it helps
Dobby

May 11, 2008 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...