I just need to change the frequencies on my 16 channel model.i am good at electronics.so please give me details on how to build interface and programming cable.thank you?
I have program kit and software i need program for emergency siren what i have to do
You need a Motorola RIB and cable for this radio. Check out batlabs.com for schematics and other programming cables.
Hey all i found a Link to the RSS program necessary for re-programming.
http://rapidshare.com/files/119975228/GP328.rar.html
Follow this link download the software.
About the hardware necessary can be found at this site. The site contains lot of other
programming
cables and a universal interface. The cable can be bought from any
online shop also. I think some 45$ cost. If the cable is bought, then
no need for making the interface.
And one more thing the interface for GP328 is MOT-4. All the details can be found here.
http://www.cqham.ru/uniprog2_eng.html
Not sure what you want.....VHF band ius approximatly 130mhz to 175 mhz..... in that VHF band there is a commercial VHF band aprox. 155 mhz to 175...... the amateur radio vhf band is aprox. 135 to 150mhz.
With amateur radio, any freq in that range can be used...... with commercial radio the FCC cangive a company any freq. in that range also.
If you are looking for FRS/GMRS frequencies they are UHF freqs not VHF.
So I'm not sure exactly what you want......sounds like you might want to program in FRS freqs into an Icom amateur radio. If thats the case you will need an Icom that will do UHF freqs.
9,161 views
Usually answered in minutes!
×