Question about Siemens Washing Machines

Open Question

While showing drying time 3, flashing anti crease with indication on pre wash in yellow colour, the drum stopped rotations.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gittos73
  • 244 Answers

SOURCE: machine is locked

to open your door make sure all the water is out of your drum if not get the outlet hose and place on the floor into a bucket if water comes out than your pump is either blocked/faulty

Posted on Aug 12, 2007

  • 279 Answers

SOURCE: machine is locked

Have you tried simply unplugging the machine - that is if you can get to the plug. Or, you could always flip the circuit breaker off. Either way, leave it off for a minute or two, and that should give it time to forget what it was doing. Once you start it back up, it should unlock, unless it has some kind of static memory that survives power outages.

Posted on Aug 30, 2007

localwonder
  • 6784 Answers

SOURCE: NEFF washer not starting. error code 3/flashing anti-crease butto

This may be a simple control fault that can be reset by unplugging for 5 minutes or switching the breaker switch off for five minutes also. if the five minute reset doesn't restore the machine to its original operational value, you will then need to replace the main control board in this unit. it has failed.

Posted on May 11, 2009

  • 1 Answer

SOURCE: drum doesn't really rotate on wash cycle.

No solution, but I have the same or similar problem - bootom agitaor works, top doesn't. Also softner spots clothes during spin cycle - help - I can't afford a repairman!

Posted on May 17, 2009

blueextc3221
  • 15935 Answers

SOURCE: START BUTTON AND ANTI CREASE BUTTON FLASHING RAPIDLY

It appears your Main Controller has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an aeg washer dryer L87695NWD which is stuck on drying. When I turn the button to select a washing program the drying light stays on, and the washing light is still off.. what can I do?


From user manual:

10.4 At the end of the drying programme

1. The appliance stops automatically.
2. The acoustic signals operate (if they are active).
3. In the display (number "0") comes on.
4. The indicator of button Start/Pause goes off.
5. The last minutes of the drying cycle the appliance performs the
anticrease phase. The anti-crease symbol ietounus3lrwasi2ko2vq2k81km1my9gxk62inwk5r2qaaaabjru5erkjggga=flashes. The
door is still locked (the key ezfxrjud2vanwq0oeawt0sih4u7drnvleuvj3nru5hkbv+p2lq2ra1xbwbjeddwhka3byaaaaasuvork5cyiiasymbol is on).
6. Press button On/Off for some seconds to deactivate the
appliance. After some minutes from the end of the programme,
the energy saving function automatically deactivates the
appliance.
7. When the door locked light goes off you can open the door.
8. Remove the laundry from the appliance. Make sure that the drum
is empty.
9. Keep the door ajar, to prevent mildew and odours.
10. Close the water tap.

If this doesn't help than check:
- If the delay start is set, cancel the setting or wait for the end of
countdown.
- Deactivate the Child Lock function if it is on

untitled1-rq2y3fnvghvfrpvxa33jafnd-1-0.jpg
If anything of this doesn't help then pay attention to all the symbols appears on the display and check what it means in the user manual.

Dado

Apr 01, 2017 | AEG Washing Machines

1 Answer

Pre-Wash and Crease Care lights flashing?


WHILE IT IS LOADING WATER, TRY TO ADVANCE THE WASH PROGRAM; INSTEAD OF LARGE CAPACITY GO TO MEDIUM.

Jun 20, 2015 | Washing Machines

1 Answer

Aeg electrolux dryer


Displaying the alarm code

The alarm code is displayed by a repeated sequence of flashing of the ANTI-CREASE/END OF CYCLE LED (0.4 seconds on, 0.4 seconds off, with a pause of 2.5 seconds between sequences). The buzzer emits a series of ,bips" in synchronization with the flashing of the LED.

  • ANTI-CREASE/END OF CYCLE LED: indicates the first number of the a alarm code
  • START/PAUSE LED: indicates the second number of the alarm code
Now you must count how many times the LED lit up and we will know the fault code.

24383347-wycorcio5u0xxoh2plbhrodj-5-0.jpg Dado

May 10, 2014 | AEG Dryers

1 Answer

Anti crease light flashing, keeps stopping and beeping


Check the dryer vent to see if it is free and clear.

Jan 26, 2014 | Miele Dryers

1 Answer

Child safety lock feature is on. how do you take it off


im not sure if your model of dryer but here is some instructions
Child lock
When activated, the child lock prevents the dryer from being operated by locking the control panel functions.
The dryer can be turned on but not started. The "Child lock" indicator will flash.
The door can be opened.
To activate the child lock
1. Make sure the dryer is turned off and
the door is closed.
2. Press and hold the "Anti-crease" and "DRYNESS" buttons at the same time, hold until step 5.
3. Turn on the dryer with the "On/Off" button.
4. Press the "OPTIONS" button 3 times. 5. Release the "Anti-crease" and
"DRYNESS" buttons.
The "Child lock" indicator will flash and the dryer is now locked.
6. Turn off the dryer using the "On/Off" button.
To deactivate the child lock Repeat steps 1. to 5.
The "Child lock" indicator will go out. The control panel is now unlocked.
6. Turn off the dryer using the "On/Off" button.

Dec 15, 2012 | Bosch Washing Machines

1 Answer

How to fix washing machine


1)test the button for open or defective with a VOM see the diagram and how to do it.
2) the board can be faulty. however resolder all the colder joints+ tight very well all connectors wires, and proof again. God bless you
6_20_2012_8_00_40_am.gif

Jun 19, 2012 | Washing Machines

1 Answer

Drum doesn't really rotate on wash cycle.


No solution, but I have the same or similar problem - bootom agitaor works, top doesn't. Also softner spots clothes during spin cycle - help - I can't afford a repairman!

May 17, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

3 Answers

Beko wma 1715s


The Child lock is in the on mode lol.....
Press and hold the two buttons quick wash and anti crease or
pre wash and extra rinse for 4-5 seconds ...Note the pre wash blinking light will go off and your machine will be ready to use again. the pre-wash blinking light indicates that the child lock has been activated......

Jan 05, 2008 | LG WM1814CW Front Load Washer

1 Answer

Machine is locked


to open your door make sure all the water is out of your drum if not get the outlet hose and place on the floor into a bucket if water comes out than your pump is either blocked/faulty

Aug 12, 2007 | Bosch Logixx WFT 2806 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...