Question about Aiwa F2000 20" TV

2 Answers

Remote is not working and when i use manual button on TVfor volume & channel change, it get changed to Video 1 and Video 2 and next channel. Every time it is happening like this only.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I NEED A CODE FOR AIWA AS205

Posted on May 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

First, the remote:
If you have a cell phone with a camera, aim the remote at the cell phone, so you can see the front of the remote on the cell phone screen. Press a button on the remote, and see if you can see it blinking through the cell phone screen. If you can, you know the remote is working.
Now, the TV:
Have you programmed the channels in? Run the setup function on the TV to auto-search for channels. It should automatically program all the channels it's currently receiving.
Hope that helps. Please report back and perhaps I can help more.

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have Aiwa TV MODEL No. TV-A209 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its stuck...


have Aiwa TV MODEL No. TV-A209
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.

Its stuck randomly on a particular channel that I was watching at that point of time.

Along with that channel it now shows a message in flashing red color that reads :-
AGING
O6895H

Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
000 001 1


The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.

I really don't know anything about this. So, please help me out of this problem.

Nov 08, 2010 | Standard (CRT) Televisions

1 Answer

TV doesn't respond to remote controller suddenly. I changed batteries of the controller and checked it. The controller is not a problem. I tried manual buttons on TV but it didn't work. TV turns on and...


This is caused by radio frequency and what i mean by that isyour tv unit is gettng confused with the crystals that control the connection between the tv and remote.The solution to this is to go to wal mart and buy a new universal remote and in the package should be an instruction manual to set the remote to the tv , First find your tv name in the pamplet,second there will show a code of the remote type it in and enjoy.

May 18, 2010 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

How to get TV/video mode without remote


some tv do that changing the channels.

in the control panels in the tv where r the buttons for change channel there must be video button, push it and there you go.

Good Luck

Jan 12, 2009 | Toshiba 14AF44 14" TV

1 Answer

Remote problems


Try this website 1-800-Remotes factory original, buy an exact remote.

May 26, 2008 | Toshiba 20AF46 20" TV

3 Answers

Toshiba 24AF44


You need the original remote controller to be able to switch input modes.Universal ones usually don't work. If you don't have the original remote and can't find it ever or if it is too expensive you can buy an rf modulator ( very cheap) and connect your dvd player, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me. It placed the connection to channel 4 and other cable channels are still working,

You can buy the RF Modulator from: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180299245670

Mar 16, 2008 | Toshiba 24AF45 24" TV

2 Answers

Wharfedale LCD3210AF Television- Digital problems!


Well there is still a problem with the TV. I found that by unplugging the power cable that the digital channels worked. But, when I turned the TV on today the problem had returned, I had to take out the power cable again!

Feb 11, 2008 | Standard (CRT) Televisions

1 Answer

TV will not turn off and TV buttons preform the wrong functions


check D1004 5v zener diode, if defective it can cause you this type of problem, also check D1003 and D1005.
part # 8-719-929-15 from sony.
these diodes are located in HS board, the one where all your front button are located in. by the way the HS board is no longer availableffrom sony

Dec 18, 2007 | Sony FD Trinitron WEGA KV-27FS100 27" TV

2 Answers

Sanyo TV is stuck on Video screen


Universal Remote should do it.

Sep 08, 2007 | Sanyo DS24205 24" TV

9 Answers

Lost remote to 27in rca tv, how can i switch my tv to input/output mode so i can watch movies on my dvd playter? i have a rca univeral remote, but it will not change my tv to input or output.


using the menu button on the t.v. set an alarm for 1 min in the future. have the t.v change to channel 00 or the input channel @ that time. turn off the t.v and wait until the alarm turns the t.v on.

Aug 11, 2007 | RCA 27F534T TV

Not finding what you are looking for?
Aiwa F2000 20" TV Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aiwa Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68229 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you an Aiwa Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...