Question about Nintendo Wii Fit for Wii

3 Answers

Canot use Wii fit balance board

Board suddenly stopped working. Have followed instructions to re sync board with console to no avail. Blue light flashes for a few seconds only.

Posted by on

  • 10 more comments 
  • xstitch12320 Jan 04, 2009

    Purchased Wii fit board in October 2008. Working fine until Jan 4 when blue light just kept flashing when went to switch it on. Any ideas please?

  • garriewynn3 Feb 01, 2009

    try to sync wii fit board to my console but instead of connecting the board it disconnects my wii remote. anyone have any ideas???? thanks

  • gramsdale Feb 10, 2009

    blue light flashes and goes out. can't sync with the wii.

  • liziov Feb 24, 2009

    i have the same problem.. i try to sync the board but the power button flashes and then turns off.. i have tried changing batteries several times but to no avail..help!

  • Anonymous Mar 02, 2009

    Ugh. I cannot resync te balance board. I have followed all troubleshooting instructions from the manuals. So frustrating.



  • Anonymous Mar 06, 2009

    I have the same problem. Blue power light flashes on Wii fit board a couple of times then goes out. Cannot resycn. Have changed batteries but this has not helped.

  • buttons7ll Mar 09, 2009

    Have changed batteries and tried to re-syc but woth no luck can anybody help

  • Anonymous Apr 13, 2009

    um ive tried to sync but it wont work the light flashes but it wont sync and it wont turn on can someone please help me

  • Anonymous Apr 13, 2009

    ive tried to sync but it wont work the light flashes but it wont sync and it wont turn on can someone please help me

  • shree13 Apr 20, 2009

    I am also having problems with syncing. Blue light flashes then nothing, tv screen goes totally black and then cannot switch wii console on or off unless i do it from the mains. Please help. Thanks

  • nanarosie3 Apr 22, 2009

    I am having the same problem. I have changed batteries and tried resyning but the blue light flashes and then goes out.

  • Anonymous Mar 19, 2014

    tried to sync board with wii. board light flashes for a few minutes then goes out, but wont come on

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 80 Answers

Ensure batteries are fresh. Ensure that Wii Fit (or other Balance Board game) is started up completely before pressing the power button.

Posted on Jan 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have been trying to sync my wii fit board and console, but the light on the board will flash then go out

Posted on Jan 31, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks for this but I solved it from another website. Wii Fit needed re syncing and now works fine.

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect wii fit board to the wii


Important Note!
Do Not use "One-Time Mode" sync.
Syncing can be completed only if a compatible game disc is running in the console.The Wii Balance Board may need to be synced to each compatible game individually.Some games may require you to go into a specific screen to sync the Wii Balance Board.These sync settings will be saved even after the console is turned off.

1. Insert a Wii Balance Board compatible game disc in the Wii console.
2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game.3. Open the SD Card slot cover on the front of the Wii console.4. Remove the Battery Cover on the bottom of the Wii Balance Board.
5. Press and release the SYNC button on the Wii Balance Board. The Power LED on the board will start blinking.
6. Press and release the SYNC button on the console while the Power LED on the board is still blinking.
7. The Power LED will stop blinking and light steadily once the synchronization is complete.8. Replace the battery cover and return the board to the normal operating position.

Nov 16, 2011 | Nintendo Wii Fit for Wii

1 Answer

The wii fit game is telling me to push the power button on the balance board with my foot. It blinks blue and that's it. The batteries are fine. So what do I do?


You need to sync the balance board with the Wii. It's easy to do and takes 10 seconds.

1) Start Wii Fit.
2) When it asks you to push the power button as you're describing, open the SD card slot on the front of the Wii and observe the red button.
tkahill.gif

3) Now, flip over the balance board. Remove the battery cover on the bottom of it, and press the red button beside the batteries, and the blue light should start to blink.
tkahill_0.gif

4) While the blue light on the balance board is still blinking, quickly press the red button on the Wii. If they are both blinking at the same time, they should be syncing to each other.

5) Your Wii Fit Balance Board should now be synced with your Wii! If it has been synced successfully, you will no longer need to sync it, and should now automatically connect when the button is pressed with your foot.

Apr 09, 2011 | Nintendo Wii Fit for Wii

2 Answers

I have a wii fit board, when you power it up, it


Had the same problem. It's a sync problem.
First, best to double check you have fresh batteries.
Next, turn the board upside down and remove the cover from the battery compartment.
Open the small hatch cover on the front of your console unit.
Now start wii fit from the disk menu item.
Next, press the small red button inside the balance board battery compartment. The blue lights will blink for approx 3=5 sec.
While they are blinking, press the red button on the console (in the hatch compartment).
This should re-sync your board and the light stays lit.
Good luck.

Apr 07, 2010 | Nintendo CTA Digital WI-BBP Wii Fit...

1 Answer

Bought 2nd hand wii fit, have just loaded disc and replaced batteries in board but power light not staying on board, flashes for about 30 seconds and then switches off. Does it need to be synchronised with...


    Hope this helps

    Try these steps!

  1. Insert a Wii Balance Board compatible game disc in the Wii console.

  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
  7. The blue light will stop blinking and stay on steady once the synchronization is complete.
please leave a good rating and testimonial if you appreciate my help. THNX

Mar 27, 2010 | Nintendo Wii Fit for Wii

3 Answers

My wii fit board keeps telling me to ''step off the balance board and press A'' I am not standing on it when i get this message. I've checked the batteries, re synched the board to my wii, taken out the...


Looked around for a solution for a long time for this one.

1) removing the batteries from the Wii Fit balance board for at least a minute.

2) Turn the Wii OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds plug the cord back into the outlet.

2 Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This should clear all the old syncs on the Wii.

3 After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:

a With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

b Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will turn on.

c Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console.

d When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

4 Start the game from the Wii Menu, don't forget to sync the Wii Balance Board from the opening screen of the game (you've deleted the syncs earlier).

Another problem may be the surface on which you post the Wii fit, make sure it's flat, try put it on the floor directly or place it on a rug.

And don't forget to "step on" it when it says and not before as the Wii console might be "overloaded".

Jan 31, 2010 | Nintendo Wii Fit for Wii

1 Answer

We used our wii fit on another wii system. After


Hello,

    Try these steps!

  1. Insert a Wii Balance Board compatible game disc in the Wii console.

  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
  7. The blue light will stop blinking and stay on steady once the syncronization is complete.
Fore more detailed information (including pictures) on how to sync the Wii Balance Board, click here.

If you are still unable to sync your Wii Balance Board, please call 1-800-255-3700 so that they may assist you further.

Hope it helped.


Nov 22, 2009 | Nintendo Wii Fit for Wii

2 Answers

Wii Fit Balance Board Won't turn on


i fixed it by re-syncing it with the console. all good now, although it seems a little out of balance, but at least working....

Jan 04, 2009 | Nintendo CTA Digital WI-BBP Wii Fit...

1 Answer

Unable to sync Balance Board and its knocking the remotes out too


When you are prompted to press the sync buttons you just have to press and release just once the sync button on the console and then on the board. Do not hold the buttons in because you just end up un syncing everything!

Dec 27, 2008 | Nintendo Wii Fit for Wii

3 Answers

Power


    Try these steps!

  1. Insert a Wii Balance Board compatible game disc in the Wii console.

  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
  7. The blue light will stop blinking and stay on steady once the syncronization is complete.

Sep 09, 2008 | Nintendo Wii Fit for Wii

2 Answers

Wii fit


I found this on a related post, but it should help:

Hi,
After posting my message here I started to fiddle around with the wii fit again and went slowly step by step through the synchronisation steps. Voila it works! what I had done wrong was that I did not press the red synchronisation button for the wii console when the blue lights (after pressing the sync button) on the wii fir board started to flash. you must do this when they are flashing. Hopefully you are as lucky as me and it will work for you too.

Aug 25, 2008 | Nintendo Wii Fit for Wii

Not finding what you are looking for?
Nintendo Wii Fit for Wii Logo

1,763 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Accessories Experts

pwetherhill

Level 2 Expert

44 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

Are you a Nintendo Video Game Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...