Question about RCA Televison & Video
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: PT4298HD Double image
my akai 42 inch 4298 hd television is showing double and tripple i tried to correct the problem by adjusting the convergence to no avail now the remote control will not work for the convergence and picture is distorted please help
Posted on Dec 30, 2008
Your TV most likely has a convergence failure. ( common problem )
Here are some of the most common symptoms and example photos of a convergence problem
Here is a quick test....
Using your original remote go-to the tv settings then goto the convergence section.
Try to adjust the red and then the blue convergence.
You should be able to move them up, down, left, and right.
If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.
You will need to replace the convergence chips and possibly some convergence resistors and pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, email/phone support, etc.
Posted on Jun 21, 2009
This is a convergence problem that can be as simple as poor solder connections at the convergence ICs or defective ICs. If you feel that you want to attempt the repair yourself, please update this with that indication and additional details and instructions will follow. The parts for this repair will run about $40-$60.
Posted on Dec 10, 2009
This tv have covergence problems,it dead.The convergence board the 2 STK covergence ICS and some or all it resistors are dead.Must replaced these parts to solved convergence problems.The shop will cost u $300-350 for parts and labors.
Posted on May 23, 2010
Tips for a great answer:
Nov 02, 2012 | RCA Televison & Video
Jan 31, 2012 | Computers & Internet
Jan 04, 2011 | Sony KP-57WV600 57" Rear Projection...
Sep 02, 2009 | RCA P52812BL 52" Rear Projection...
Aug 11, 2009 | RCA P46924 46" Rear Projection Television
May 09, 2009 | Televison & Video
Jun 26, 2008 | Televison & Video
Apr 21, 2008 | JVC AV-56WP74 56" Rear Projection...
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: